> Home > Brands & Solutions > Adhesives, Sealants & Surface Treatments > Industrial > Full Product List
Full Product List (2688)
| 50ML GRADE AA WELD SEALANT | Used to lock and seal fine threaded nuts, bolts, and studs in a wide variety of applications. |
| 7802 Hysol | Loctite® Hysol® 7802 polyamide hot melt is a tough, flexible high performance adhesive with excellent adhesion to many difficult to bond substrates. |
| 97SC (SAC305) Bar | MULTICORE 97SC (SAC305) alloy is designed to be a lead free substitute for tin/lead alloys in most electronics assembly soldering operations. |
| Ablebond 2000T | Ablebond 2000T is a high thermal conductivity adhesive. Low bleed on silver substrates. |
| Ablebond 8008NC | Ablebond 8008NC is a non-conductive snap cure adhesive. |
| Ablebond AAA3300 | Self-filleting low modulus adhesive for attaching large die on thin organic substrates. |
| Ablecoat 8008 | Ablebond 8008 is an electrically conductive snap cure adhesive utilizing wafer backside coating technology. |
| Ablestik 2025D-SF | Non-conductive die attach adhesive paste. |
| Ablestik 6202c | Ablestik 6202c is a B-stageable printable paste with low moisture uptake and bleed. |
| Ablestik 6204A | Fast B-stageable printable paste with no die attach cure required. Low outgassing. |
| Ablestik 8008MD | Electrically and thermally conductive die-attach. |
| ABLESTIK 84-1LMISR4-S25 | ABLESTIK 84-1LMISR4-S25 electrically conductive die attach adhesive. |
| Ablestik AAA3320 | Ablebond AAA3320 is a self-filleting adhesive for die-to-substrate applications. |
| ABLESTIK ABL-2100A | ABLESTIK ABL-2100A die attach adhesive is low bleed, low cost, low stress designed for Pb-free array packaging. |
| ABLESTIK ABLEBOND 16-1 | ABLESTIK ABLEBOND 16-1 is a two-component, electrically conductive epoxy adhesive designed for general purpose applications. It cures at room temperature while providing a reasonable work life. |
| ABLESTIK ABLEBOND 2000 | ABLESTIK ABLEBOND 2000 electrically conductive die attach adhesive is designed for Pb-free PBGA and Array BGA packaging. |
| Ablestik ABLEBOND 2000B | Electrically conductive die attach paste adhesive is designed for Pb-free PBGA and Array BGA packaging. |
| Ablestik ABLEBOND 2025D | A hybrid chemistry die attach paste adhesive designed for PBGA. |
| Ablestik Ablebond 2025DSI | Ablebond 2025DSI is a non-conductive low bleed adhesive. |
| Ablestik ABLEBOND 2030SC | Die attach adhesive has been formulated for use in high throughput die attach applications. |
| Ablestik ABLEBOND 2033SC | Die attach adhesive is designed for high throughput smart card bonding applications. |
| Ablestik ABLEBOND 2035SC | Non-conductive die attach adhesive has been formulated for use in high throughput die attach applications. |
| ABLESTIK ABLEBOND 2035SC-1B1 | ABLESTIK ABLEBOND non-conductive, one component die attach adhesive was formulated for high throughput die attach applications. |
| Ablestik ABLEBOND 2053S | Ablebond 2053S is a low stress paste adhesive for die-to-substrate applications. |
| Ablestik ABLEBOND 2100A | Ablebond 2100A is an ultra low moisture absorption paste adhesive for lead-free packaging. |
| Ablestik ABLEBOND 2300 | Ablebond 2300 is an ultra low moisture absorption, low stress paste adhesive. |
| Ablestik ABLEBOND 3003 | Ablebond 3003 is a low modulus, high adhesion, ultra-low moisture lid attach material. |
| Ablestik ABLEBOND 3005 | Ablebond 3005 is for large packages and lead-free applications. |
| Ablestik ABLEBOND 3230 | Eectrically conductive die attach adhesive is designed for high reliability package applications. |
| ABLESTIK ABLEBOND 3230A | ABLESTIK ABLEBOND 3230A adhesive die attach is designed for semiconductor packaging applications where high electrical conductivity is not required. It can be used in a variety of package sizes. |
| ABLESTIK ABLEBOND 3290 | ABLESTIK ABLEBOND 3290 is a snap curable, electrically conductive die attach adhesive designed for lead-free applications where high reliability is a key requirement. |
| ABLESTIK ABLEBOND 342-37 | ABLESTIK ABLEBOND 342-37 epoxy adhesive is designed for applications requiring outstanding thermal shock properties. |
| Ablestik ABLEBOND 8175 | A general conductive, screen printable thermal conductive paste adhesive. |
| Ablestik ABLEBOND 8175Q | Electrically conductive, paste adhesive designed for solder replacement in microelectronic interconnect applications |
| Ablestik ABLEBOND 8177 | Screen printable, thermal conductive, paste adhesive. |
| Ablestik ABLEBOND 8200C | Electrically conductive die attach adhesive is designed for high reliability package applications with medium thermal and electrical requirements. |
| Ablestik ABLEBOND 8200TI | Ablebond 8200TI is Ablebond 8200C with higher thermal conductivity and optimized adhesion on NiPdAu leadframe. |
| Ablestik ABLEBOND 8290 | Ablebond 8290 is a low stress die attach adhesive suitable for die size <200 mil. |
| ABLESTIK ABLEBOND 8340-O | ABLESTIK ABLEBOND 8340-O is an electrically conductive die attach adhesive designed for high reliability lead frame packaging applications. |
| ABLESTIK ABLEBOND 8350M | ABLESTIK ABLEBOND 8350M electrically conductive one component die attach adhesive has been formulated for use in high throughput die attach applications. |
| ABLESTIK ABLEBOND 8350R | ABLESTIK ABLEBOND 8350R is a snap curable die attach adhesive designed to provide anti-delamination and package reliability. |
| Ablestik ABLEBOND 8352L | Ablebond 8352L is a high electrical and thermal conductivity die attach adhesive. |
| Ablestik ABLEBOND 8384 | Die attach adhesive. |
| ABLESTIK ABLEBOND 8387A | ABLESTIK ABLEBOND 8387A is a non-conductive die attach adhesive designed for high throughput smart card bonding applications. |
| Ablestik ABLEBOND 8387B | Non-conductive die attach adhesive has been formulated for use in high throughput die attach applications. |
| ABLESTIK ABLEBOND 8387B-1B2 Non Conductive Die Attach Adhesive | ABLESTIK ABLEBOND 8387B-1B2 non-conductive die attach adhesive. |
| Ablestik ABLEBOND 8387BS | Single component die attach adhesive designed for high throughput bonding applications. |
| ABLESTIK ABLEBOND 8387BSW | ABLESTIK ABLEBOND 8387BSW is a single component, non-conductive adhesive designed for high throughput bonding applications. |
| Ablestik ABLEBOND 84-1A | Adhesive for high volume semiconductor applications, fast cure. |
| Ablestik ABLEBOND 84-1LMI | Enhanced thermal conductivity, fast cure, general conductive, low stress die & component attach adhesive paste. |
| ABLESTIK ABLEBOND 84-1LMISR3 | ABLESTIK ABLEBOND 84-1LMSR3 electrically conductive adhesive is designed for die attach applications. It is a low viscosity and higher thixotropic index version of ABLEBOND 84-1LMIS. |
| Ablestik ABLEBOND 84-1LMISR4 | Ablebond 84-1LMISR4 is an industry standard die attach paste adhesive. |
| Ablestik ABLEBOND 84-1LMISR8 | Electrically conductive adhesive. |
| Ablestik ABLEBOND 84-1LMIT1 | A general conductive, low stress thermal conductive paste adhesive. |
| Ablestik ABLEBOND 84-3 | Electrically non-conductive adhesive pastes for screen printing, dispensing and insulating applications. |
| Ablestik ABLEBOND 85-1 | A general conductive, gold-filled, high reliability conductive paste adhesive for critical applications. |
| Ablestik ABLEBOND 8700E | Dispensible, fast curing, general conductive, paste adhesive and meets the requirements of MIL-STD-883, Method 5011. |
| Ablestik ABLEBOND 8700K | One component, heat cure, dispensible paste adhesive and meets the requirements of MIL-STD-883, Method 5011. |
| Ablestik ABLEBOND 8900NC | Non-conductive die attach adhesive. |
| ABLESTIK ABLEBOND 933-1 moisture resistant chip encapsulant | ABLESTIK ABLEBOND 933-1 epoxy encapsulant is designed for encapsulating microelectronic chips. |
| Ablestik ABLEBOND 958-11 | One component, low stress paste adhesive. |
| ABLESTIK ABLEBOND 958-8C | ABLESTIK ABLEBOND 958-8C is an electrically conductive epoxy designed for solder replacement in microelectronic interconnect applications. |
| ABLESTIK ABLEBOND 965-1L | ABLESTIK ABLEBOND 965-1L is an electrically conductive epoxy die attach designed for bonding large die integrated circuits with mismatched coefficients of thermal expansion. |
| Ablestik ABLEBOND 967-1 | Two components, low temperature cure paste adhesive. |
| Ablestik ABLEBOND 967-3 | Two components, low temperature cure, paste adhesive. |
| ABLESTIK ABLEBOND 969-1 | ABLESTIK ABLEBOND 969-1 is an electrically conductive preimidized adhesive designed for semiconductor die attach. It is not recommended for use in hermetic packages. |
| ABLESTIK ABLEBOND AAA3131A | ABLESTIK ABLEBOND AAA3131A die attach is electrically and thermally conductive recommended for package types which require very low electrical resistivity. It is snap curable or heat curable. It is designed for leadframe applications. |
| Ablestik ABLEBOND FS849-TI | Ablebond FS849-TI is a high thermal conductivity adhesive with low electrical resistance. |
| Ablestik ABLEBOND GA-2W | Non-conductive die attach adhesive. |
| Ablestik ABLEBOND MC723 | Ablebond MC723 is for bondline control achieved with 75 micron spacers. |
| Ablestik ABLECOAT 8006NS | Ablecoat 8006NS (WBC) is a non-conductive oven cure adhesive utilizing wafer backside coating technology. |
| Ablestik ABLECOAT 8008HT | Ablecoat 8008HT is a high thermal conductivity snap cure adhesive utilizing wafer backside coating technology. |
| Ablestik ABLEFILL UF8806G | Ablestik UF8806G is moisture resistant. For die sizes <25mm. Ultra low alpha emissions. |
| Ablestik ABLEFILL UF8807 | One component, high flow liquid underfill encapsulant with superior moisture resistance. |
| Ablestik ABLEFILL UF8826 | Ablestik UF8826 is for eutectic high lead low k applications. Medium modulus, low CTE. |
| Ablestik ABLEFILL UF8828 | Ablestik UF8828 is for eutectic, high lead or lead-free packaging. Higher modulus. |
| Ablestik ABLEFILL UF8829 | Ablestik UF8828 is for eutectic, high lead or lead-free packaging. Higher modulus. |
| Ablestik ABLEFILM 5020K | A high purity adhesive film with excellent adhesion to gold-plated surfaces, particularly suited for use in hermetic packages. |
| Ablestik ABLEFILM 5025E | Unsupported, epoxy adhesive film |
| Ablestik ABLEFILM 506 | A flexible film adhesive designed for bonding TCE mismatched materials. |
| Ablestik ABLEFILM 550 | Supported, high strength adhesive film |
| Ablestik ABLEFILM 550K | Combines high adhesion strength with very good thermal conductivity in a fiberglass supported film adhesive. |
| ABLESTIK ABLEFILM 551 | ABLESTIK ABLEFILM 551 flexible unsupported adhesive film is designed to produce tough, resilient bonds between materials with differing coefficients of thermal expansion. It is also useful for bonding thin, flexible materials where good peel strength is required. |
| ABLESTIK ABLEFILM 561 | ABLESTIK ABLEFILM 561 is a thermally conductive epoxy film designed for bonding materials with mismatched coefficients of thermal expansion. |
| Ablestik ABLEFILM 561K | Supported, thermally conductive dielectric adhesive film. |
| Ablestik ABLEFILM 563K | Supported, thermally conductive dielectric adhesive film. |
| Ablestik ABLEFILM 566K | Ablefilm 566K offers low temperature cure in a thermally conductive adhesive with excellent flexibility and adhesion. |
| Ablestik ABLEFILM 566KAPTON | Heat cure epoxy film. |
| ABLESTIK ABLEFILM ECF550 | ABLESTIK ABLEFILM ECF550 adhesive is designed for microelectronic applications which require electrical conductivity. When used for substrate attach, this adhesive film acts as an electrical ground plane. In the assembly and sealing of microelectronic packages which require RF shielding, ABLEFILM ECF550 film adhesive maintains electrical continuity between joints. |
| Ablestik ABLEFILM ECF561E | Supported, electrically and thermally conductive adhesive film. |
| ABLESTIK ABLEFILM ECF563 | ABLESTIK ABLEFILM ECF563 adhesive provides RF/EMI shielding in bonding microwave substrates into packages. |
| Ablestik ABLEFILM ECF564A | Ablefilm ECF564A is an ionically clean, fiberglass supported adhesive with very good thermal conductivity. |
| ABLESTIK ABLEFILM ECF564AHF | ABLESTIK ABLEFILM ECF564AHF is a heat cure, electrically conductive epoxy film designed for use in hybrid packages where outgassing and ionic contamination must be kept to a minimum. |
| Ablestik ABLEFILM ECF568 | Ablefilm ECF568 was designed for low temperature cure applications. It has superior adhesion to most surfaces. |
| Ablestik ABLEFLEX 6200 | Ableflex 6200 is a B-stageable printable paste with low moisture uptake and bleed. |
| Ablestik ABLEFLEX 6202C-X | Die attach adhesive. |
| ABLESTIK ABLELUX A4035T | ABLESTIK ABLELUX A4035T photocurable adhesive is formulated to enhance productivity in the assembly of optical, fiber optic, and optoelectronic devices. |
| ABLESTIK ABLELUX A4083T | ABLESTIK ABLELUX A4083T photocurable adhesive is formulated to enhance productivity in the assembly of optical, fiber optic and optoelectronic devices. |
| Ablestik ABLELUX A4502 | Non-conductive photocurable adhesive. |
| Ablestik ABLELUX LA-1UV | Non-conductive photocurable adhesive. |
| Ablestik ABLELUX LHA-2 | Adhesive paste for lens holder attach. |
| Ablestik ABLELUX OGR150THTG | Photocurable adhesive for wafer level assembly glass lid attach applications. |
| Ablestik ABLETHERM 3188 | Lid Attach adhesive. |
| ABLESTIK ABP 8611 Die attach adhesive | ABLESTIK ABP 8611 adhesive is designed for die attach applications as well as component attach. |
| Ablestik ABP-2501 | Ablestik ABP-2501 is a die attach formulated for use in high throughput die bonding applications. Used in smart card applications. |
| ABLESTIK ABP-8000 | ABLESTIK ABP-8000 conductive die attach is desgined for bonding devices where high heat transfer is required. It is recommended for use in the attachment of integrated circuits and components onto metallic leadframes. |
| ABLESTIK ABP-8910T | ABLESTIK ABP-8910T die attach adhesive is formulated with a medium modulus using hybrid chemistry and is targeted for use on medium to large die sizes. |
| Ablestik ATB-100 Series (Film) | Single layer adhesive film for mother/daughter die stacking applications. |
| Ablestik ATB-105 | Non-conductive die attach film (5 µm). |
| Ablestik ATB-105A | Non Conductive DDF: DAX film (5 µm). |
| Ablestik ATB-105U | Non Conductive DDF: DAX (5 µm) |
| Ablestik ATB-105US | Non Conductive DDF: DAX (5 µm). |
| Ablestik ATB-110 | Non-conductive die attach film (10 µm). |
| Ablestik ATB-110A | Non Conductive DDF: DAX film (10 µm). |
| Ablestik ATB-110U | Non Conductive DDF: DAX (10 µm) |
| Ablestik ATB-110US | Non Conductive DDF: DAX (10 µm). |
| Ablestik ATB-115US | Non Conductive DDF: DAX (15 µm). |
| Ablestik ATB-120 | Non-conductive die attach film (20 µm). |
| Ablestik ATB-120A | Non Conductive DDF: DAX film (20 µm). |
| Ablestik ATB-120U | Non Conductive DDF: DAX (20 µm) |
| Ablestik ATB-120US | Non Conductive DDF: DAX (20 µm). |
| Ablestik ATB-125US | Non Conductive DDF: DAX (25 µm). |
| Ablestik ATB-130 | Non-conductive die attach film (30 µm). |
| Ablestik ATB-130U | Non Conductive DDF: DAX (30 µm) |
| Ablestik ATB-130US | Non Conductive DDF: DAX (30 µm). |
| Ablestik ATB-200 Series (Film) | Dual layer format. Low warpage adhesive. Excellent wettability. |
| Ablestik ATB-F100E | ABLESTIK ATB-F100E adhesive film is formulated for use in water lamination processes and preform decal. |
| Ablestik C115 | Ablestik C100 series (C115 and C130) conductive die attach films. Ablestik C115 supplied in 15 micro thickness enables leadframe package manufacturers to realize the advantages film-based products have over traditional paste die attach products. Benefits include the elimination of die tilt, the ability to process thinner die and facilitation of greater bondline control all of which allow for improved processability, higher yields and better long-term reliability. |
| Ablestik C130 | Ablestik C100 series (C115 and C130) conductive die attach films. Ablestik C130 supplied in 30 micro thickness enables leadframe package manufacturers to realize the advantages film-based products have over traditional paste die attach products. Benefits include the elimination of die tilt, the ability to process thinner die and facilitation of greater bondline control all of which allow for improved processability, higher yields and better long-term reliability. |
| ABLESTIK CE3850 electrically conductive adhesive | ABLESTIK CE3850 one component electrically conductive adhesive is desgined for circuit assembly applications. |
| ABLESTIK ECI-1001 | ABLESTIK ECI-1001 screen printable, conductive ink is designed for use on membrane touch switch and other flex circuit applications. It offers excellent balance of flexibility, hardness and adhesion. |
| ABLESTIK ICP 3556M1 Electrically conductive adhesive | ABLESTIK ICP 3556M1 is a one component, snap curable electrically conductive adhesive. |
| ABLESTIK ICP-3513 | ABLESTIK ICP-3513 electrically conductive one component adhesive is designed for use in automated assembly and in-line curing operations. |
| ABLESTIK ICP-3535M1 | ABLESTIK ICP-3535M1 electrically conductive adhesive is designed for circuit assembly applications. It is specially recommended for mounting lower cost tin (Sn) finished components onto the conductive trace terminations of printed circuit boards or co-fired ceramic circuitry. Designed for applications with small size components (0603, 0402) where no bleeding or wicking is tolerated. It can be applied by stencil printing. |
| ABLESTIK ICP-3801 conductive adhesive | ABLESTIK ICP-3801 is a one component electically conductive epoxy . |
| ABLESTIK ICP4001 | ABLESTIK ICP-4001 silicone paste is specifically desgined for applications where a high degree of flexibility is required. |
| Ablestik TRA-BOND 724-14C | One component, low temperature stability, room temperature cure paste adhesive. |
| Ablestik UF8806J | Ablestik UF8806J is for large flip chip in package applications. Ultra low alpha emissions. |
| Ablestik UF8826TI | Ablestik UF8826TI is for lead-free packaging, optimized modulus and self-filleting properties. |
| Abletherm 2700B | Abletherm 2700B is a very high thermal conductivity adhesive with excellent bleed performance on gold. |
| ABLETHERM 2700HT | ABLESTIK ABLETHERM 2700HT die attach is desgined for Pb-free array packaging. This adhesive is ideal for small needle dispensing in SIP or MCM die attach applications. |
| Acheson 8370APA | Low gloss dry film lubricant weatherstrip coating. |
| Acheson AQUADAG 22 | Water based graphite coating/additive. |
| Acheson DAG 1050 | Water based graphite coating/additive. |
| Acheson ELECTRODAG 109 | Carbon ink for flexographic/rotogravure printing on plastic film (PET, PVC) and paper substrates. |
| ACHESON ELECTRODAG 423SS conductive screen printable ink | ACHESON ELECTRODAG 423SS conductive screen printable ink. |
| Acheson ELECTRODAG 452SS | Screen printable, UV curable dielectric ink for plastic film and paper substrates. Excellent flexibility. |
| ACHESON ELECTRODAG 456C conductive coating | ACHESON ELECTRODAG 456C conductive coating. |
| Acheson ELECTRODAG 461SS | Screen printable silver ink for ITO treated plastic film. |
| Acheson ELECTRODAG 479SS | Screen printable silver ink for PET film. |
| Acheson ELECTRODAG 503 | High temperature silver conductive coating |
| Acheson ELECTRODAG 503-62% | High temperature resistant, silver conductive coating. |
| ACHESON ELECTRODAG 5810 epoxy adhesive | ACHESON ELECTRODAG 5810 two component adhesive is designed to cure at ambient temperatures. |
| ACHESON ELECTRODAG 5915 | ACHESON ELECTRODAG 5915 is a one component, fast cure, electrically conductive isotropic ink designed for bonding surface mount devices to flexible or rigid printed circuits. |
| Acheson ELECTRODAG 6017SS | Screen printable carbon ink for PET film. |
| Acheson ELECTRODAG 725A (6S-54) | Screen printable, economical silver ink for PET film. Excellent flexibility. |
| Acheson ELECTRODAG 820B | Screen printable, silver filled polymer thick film ink. |
| Acheson ELECTRODAG 976SSHV | Screen printable silver ink for rigid printed circuit boards. |
| Acheson ELECTRODAG EL-411 | Screen printable silver ink for ITO treated plastic film. Good fine line printing capability. |
| Acheson ELECTRODAG PD-038 | Screen printable, UV curable dielectric ink for ITO treated PET film and copper etched circuitry. |
| ACHESON ELECTRODAG PD-054 conductive Ink | ACHESON ELECTRODAG PD-054 electrically conductive silver ink is ideal for applications using solvent or heat sensitive substrates. |
| Acheson ELECTRODAG PE-007 | Silver/silver chloride ink for flexographic/rotogravure printing on plastic film. |
| ACHESON Electrodag PE-409 | ACHESON Electrodag PE-409 is a blend of finely divided silver and silver chloride particles in a thermoplastic resin. It is specially designed for use as an electrode material in polyester film-based medical sensing devices. |
| ACHESON Electrodag PE-428 | ACHESON Eelectrodag PE-428 is a blend of silver and silver chloride pigment in a resin system designed for printing on flexible substrates. It is suitable for applications using flexographic or rotogravure printing techniques. |
| ACHESON ELECTRODAG PF-007 Conductive Ink | ACHESON ELECTRODAG PF-007 Conductive Ink |
| Acheson ELECTRODAG PF-050 | Screen printable silver ink for plastic film and paper substrates. Highly conductive, superior fine line printability. |
| Acheson ELECTRODAG PF-407A | Conductive screen printable ink. |
| Acheson ELECTRODAG PF-407C | Screen printable carbon ink for plastic film and paper substrates. |
| ACHESON ELECTRODAG PF-410 conductive Ink | ACHESON ELECTRODAG PF-410 is designed for production of flexible circuitry. |
| Acheson ELECTRODAG PF-455B | Screen printable, UV curable dielectric ink for plastic film. Excellent humidity resistance. |
| ACHESON ELECTRODAG PF-455BC Dielectric Ink | ACHESON ELECTRODAG PF-455BC is formulated as a crossover dielectric and is compatible with other Electrodag inks. |
| ACHESON ELECTRODAG PF-465 Dielectric Ink | ACHESON ELECTRODAG PF-465 ink is and insulating and protective ink. |
| Acheson ELECTRODAG PF-845 | Screen printable silver ink for PET film. Excellent flexibility and crease resistance. |
| Acheson ELECTRODAG PM-404 | Screen printable, highly resistive ink for PET film. |
| ACHESON ELECTRODAG PM-406 | ACHESON ELECTRODAG PM-406 is a conductive screen printable ink that consists of very finely divided silver particles in a thermoplastic resin. It is designed to be applied by screen printing and can be applied with high coating thicknesses of 10-20 μm. |
| ACHESON ELECTRODAG PM-500 conductive Silver Ink | Flexible, printable conductive silver ink. |
| Acheson ELECTRODAG PR-406B | Screen printable, carbon ink for rigid printed circuit boards. |
| Acheson ELECTRODAG PR-800 | Screen printable, economical carbon ink for PET film. Excellent flexibility. |
| Acheson ELECTRODAG PR406 | Carbon polymer thick film ink |
| Acheson Emralon 8370A | Flexible, low friction, dry film lubricant weatherstrip coating; For high abrasion and noise resistance requirements. |
| Acheson Emralon TW-017B | Flexible, low friction, dry film lubricant weatherstip coating. |
| Acheson Emralon TW-023HS | Flexible, low friction, dry film lubricant weatherstip coating for aggressive seal movement such as folding car top seals. |
| Acheson Emralon TW-040 | Flexible, low friction, dry film lubricant weatherstip coating for both sponge and dense seal applications. |
| Acheson Emralon TW-044 | Flexible, low friction, dry film lubricant weatherstip coating. |
| Acheson Emralon TW-067 | High performance, flexible, low friction, dry film lubricant weatherstip coating. |
| Acheson Emralon TW-067G | Flexible, low friction, dry film lubricant weatherstip coating with high UV durability. |
| Acheson Emralon TW-081 | Flexible, low friction, dry film lubricant weatherstip coating for multiple seal requirements of seal protection. |
| Acheson Emralon TW-084 | Flexible, low friction, dry film lubricant weatherstip coating. Clear coating with faster cure speeds and effective internal UV resistance. |
| Acheson Emralon TW-090 | Flexible, low friction, dry film lubricant weatherstip coating. |
| Acheson Emralon TW-092 | Flexible, low friction, dry film lubricant weatherstip coating. |
| Acheson GP 460 | Anti-seize lubricant containing high purity graphite in petrolatum |
| ACHESON LUMIDAG EL-006 | ACHESON LUMIDAG EL-006 is formulated to allow ease of blending. |
| Acheson MINICO 2001 RS | |
| ACHESON MINICO M2010RS MOD 2 | ACHESON MINICO M2000RS MOD2 are a series of one component screen printable resistive carbon inks. |
| ACHESON MINICO M2012RS MOD 2 | MINICO M2000RS MOD2 are a series of one component screen printable resistive carbon inks. |
| ACHESON MINICO M2013RS MOD2 | MINICO M2000 RS MOD 2 are a series of one component screen printable resistive carbon inks. |
| ACHESON MINICO M2014RS MOD 2 | MINICO M2000RS MOD2 are a series of one component screen printable resistive carbon inks. |
| ACHESON MINICO M2015RS MOD 2 | MINICO M2000RS MOD2 are a series of one component screen printable resistive carbon inks. |
| ACHESON MINICO M2016RS | |
| ACHESON MINICO M4100RS | ACHESON MINICO M4100RS is a one-component, silver-filled, electroless nickel plateable conductive polymer. |
| Acheson MINICO M7000 BLUE A | Screen printable dielectric ink |
| ACHESON SS24600 flexible conductive coating | ACHESON SS24600 is a dispersion of finely divided graphite in a thermoplastic resin that rapidly air dries to form a flexible conductive coating. |
| Adhesin 0880 | Sprayable waterborne insulation adhesive. |
| Adhesin 33-1536 | Neutral pH for x-ray and archival papers. |
| Adhesin 33-672A | High Quality, Very Fast Setting, Good Water Resistance, Re-tack Capable - FDA 175.105 |
| Adhesin 3738T Bonding Adhesive | Water-based, pressure sensitive adhesive |
| Adhesin 3781 Bonding Adhesive | Water-based pressure sensitive adhesive |
| Adhesin 45-7348H | Acrylic emulsion adhesive designed for general wet-bond laminating of difficult substrates. |
| Adhesin 51-3093 | General purpose assembly |
| Adhesin 51-3264BL | Light blue colored full resin front seal designed for use on envelopes that are to be stored under high humidity conditions |
| Adhesin 51-5654 | Designed to bond foil/scrim/kraft to OSB. |
| Adhesin 51-8514HUV | A high wet tack, fast set speed, layflat |
| Adhesin 55-5005 | General purpose assembly |
| Adhesin 55-6007M | General purpose assembly |
| Adhesin 56-0004UV | General purpose assembly |
| Adhesin 56-5531 | General purpose assembly |
| Adhesin LAM 5225 | Formulated Synthetic Emulsion Adhesive |
| Adhesin PK 53-5374 | Transfer adhesive for bathroom tissue roller applications. Long open time and high tack with excellent dry release. Non-staining and water-soluble. |
| Adhesin PK 6K-5374 | Adhesin, towel pickup adhesive for blade or fountain applicators, long open time, high tack for positive transfer and excellent dry release, non-staining and water soluble |
| Adhesin PK PL-5511MH | Adhesin, transfer adhesive for household toweling roller applications, long open time and high tack with excellent dry release, non-staining and water-soluble |
| Adhesin Producer 20-100A | Pearl starch. |
| Adhesin Producer 20-200A | Modified starch. |
| Adhesin SA-7648 | A formulated pressure sensitive, acrylic emulsion adhesive. |
| Adhesin SA-9627 | General purpose pressure sensitive acrylic. |
| Adhesin SIA-485B Anti-Wick | Latex sealer for the RV industry. |
| Adhesin TS 53-3062H | Single and multi-ply tissue tail tie adhesive for spray, extrusion or squirt applications; high wet tack and water soluble; excellent release characteristics and storage stability (freeze/thaw stable) |
| Adhesin TS PL-118T | Adhesin, single and multi-ply towel tail tie adhesive for spray, extrusion, or bar/wire applications, high wet tack, water soluble, and invisible when dry; excellent release characteristics |
| Adhesin Vector 767 32-761A | Fast drying, low viscosity, mint-flavored. |
| Adhesin Vetak 7709T Green | General purpose assembly |
| Adhesin Vetak 7747 | General purpose assembly |
| Adhesin Vetak LAW 8403 | Water-based pressure sensitive adhesive |
| Adhesin Vetak V797 | General purpose assembly |
| Adhesin XA-7584 Black | Water-based pressure sensitive adhesive |
| Adhesin XA-7594 Black | Water-based, pressure sensitive adhesive |
| Adhesin XA-7595 Black | Water-based, pressure sensitive adhesive |
| Adhesin XA-7597 | Water-based, pressure sensitive adhesive |
| Adhesin XA-7597 Grey | UL-recognized component (MH28702) laminating adhesive. |
| Adhesin XA-7597LV | UL-recognized component (MH28702) laminating adhesive. |
| Adhesin XA-7598 | Water-based, pressure sensitive adhesive |
| Aerodag Ceramishield | High temperature protective coating for welding applications |
| Aerodag G | Provides a dry film coating which offers superior lubrication and excellent electrical capabilities |
| AL6002 | Water based adhesive for bonding friction materials |
| Almeco 730 | Liquid additive for sulfuric acid anodizing baths that reduces time, energy consumption, and the amount of refrigeration required for a given anodizing process |
| Almeco Seal NF-1 Nickel-Free Cold Seal | Nickel-free cold seal for anodized aluminum |
| Almecolor ST-3 | Electrolytic coloring process for anodized aluminum |
| Alodine 1000 Light Metals Conversion Coating | Used to produce a protective coating on aluminum and aluminum alloys. |
| Alodine 1000 RTU Light Metals Conversion Coating | A ready-to-use, aqueous solution for producing a protective coating on aluminum and its alloys. |
| Alodine 1001 Conversion Coating | Nonflammable, chromic acid based, coating chemical that will produce a chrome conversion coating on aluminum and its alloys. |
| Alodine 1132 Touch-N-Prep Light Metals Conversion Coating | A convenient felt-tipped conversion coating repair tool. |
| Alodine 120 Brush Kit Light Metals Conversion Coating | The products are used as received to produce the protective coating on aluminum. |
| Alodine 1200S Light Metals Conversion Coating | Aluminum conversion coating process. |
| Alodine 1200S RTU Brush Light Metals Conversion Coating | Ready-to-use liquid product that produces a chromate conversion coating on aluminum and its alloys. |
| Alodine 1201 Light Metals Conversion Coating | Non-flammable, acid based, chemical coating that produces a protective coating on aluminum and its alloys. |
| Alodine 1500 Light Metals Conversion Coating | Used to produce a protective coating on aluminum or aluminum alloys. |
| Alodine 1600 Light Metals Conversion Coating | Used to produce a chromate conversion coating on aluminum and all its alloys |
| Alodine 1600 RTU Light Metals Conversion Coating | Produces a chromate conversion coating on aluminum and its alloys. |
| Alodine 2600 Makeup Light Metals Conversion Coating | Cobalt-based conversion coating for aluminum. |
| Alodine 404 | Conversion coating process for formed aluminum cans |
| Alodine 407 Light Metals Conversion Coating | Chrome phosphate conversion coating |
| Alodine 4595 Light Metals Conversion Coatings | Chromium-free zirconium/polymer product for treating aluminum to provide an excellent base for organic finishes and bonding. |
| Alodine 47S Conversion Coating Process for Aluminum | Process used to produce a chemical conversion coating on aluminum and its alloys. |
| Alodine 5200 Light Metals Conversion Coating | Chromium free product formulated for treating non-ferrous alloys |
| Alodine 5220 Light Metals Conversion Coating | Chrome free light metals conversion coating replenisher |
| Alodine 5700 Light Metals Conversion Coating | Ready to use chrome free titanium polymer conversion coating for aluminum |
| Alodine 5700 Wipes Light Metals Conversion Coating | Ready-to-use wipes, a version of Alodine 5200 |
| Alodine 600 Light Metals Conversion Coating | Used to produce a chromate conversion coating on aluminum and its alloys |
| Alodine 600 RTU Light Metals Conversion Coating | Ready-to-use liquid product which produces a chromate conversion coating on aluminum and its alloys. |
| Alodine 713 Light Metals Conversion Coating | Formulated for the treatment of aluminum and its alloys. |
| Alodine 871 Touch-N-Prep Light Metals Conversion Coating | A felt-tipped marker that provides a dry-in-place conversion coating on aluminum surfaces prior to painting; ideal for coating repair work. |
| Alodine EC2 Light Metals Conversion Coating | Electroceramic coating for aluminum and titanium alloys |
| Alodine Magnesium Treatment Kit | Light metals conversion coating formulated for treating magnesium alloys to conform to SAE AMS-M-3171, Type VI |
| Alodine T 5900 Light Metals Conversion Coating | Trivalent chrome conversion coating approved to MIL-DTL-81706/MIL-DTL-5541F Class 1A and 3. |
| Alodine T 5900 RTU Light Metals Conversion Coating | Trivalent chrome conversion coating approved to MIL-DTL-81706/MIL-DTL-5541F Class 1A and 3. |
| Alodine T 5900 Toner | Used to build up the Alodine® T 5900™ bath |
| Alodine T 5923 Light Metals Conversion Coating | A complex trivalent chromium conversion coating |
| Aquadag Water Based Graphite Coating / Additive | An aqueous-based colloidal dispersion of ultra-fine graphite |
| Aquence 1772 Cleaner | For heavy duty cleaning of ferrous metals prior to autodeposition |
| Aquence 182A | Phosphoric acid based, detergent-type metal cleaner and rust remover with biodegradable organic surfactants |
| Aquence 2150 Reaction Rinse | Environmentally friendly seal rinse technology |
| Aquence 2592 Alkaline Cleaner | Cleaner is a blend of inorganic alkaline components which remove moderate to heavy deposits of mill oil from ferrous substrates |
| Aquence 2599 Cleaner | Alkaline cleaner designed to prepare steel surfaces to receive an Aquence coating |
| Aquence 2600 Cleaner | For heavy duty cleaning of ferrous metal surfaces prior to autodeposition |
| Aquence 2810 Cleaner | Used to remove a variety of soils, oils and forming lubricants from steel prior to the application of autodeposited coatings |
| Aquence 2819 Cleaner | Cleaner is a blend of inorganic alkaline components which remove moderate to heavy deposits of mill oil from ferrous substrates |
| Aquence 2860 Cleaner | For use in immersion process equipment for heavy duty cleaning and oxide removal from ferrous metal surfaces prior to autodeposition |
| Aquence 3416 Reaction Rinse | Appearance enhancing seal rinse technology |
| Aquence 7005 Acidic Cleaner | Cleaner is a blend of inorganic acid components which remove rust and lights mill scale from ferrous substrates |
| Aquence 7150 | For use in spray washing systems prior to Aquence paint films and for removing light rust and oxidation from iron and steel surfaces |
| Aquence 7310 | For removing light rust and oxidation from iron and steel surfaces |
| Aquence 866 Coating | Economical, low bake, environmentally friendly corrosion protection coating for steel parts |
| Aquence 866IX - Replenisher | Used to produce a smooth, black, water-based, organic coating on ferrous metal surfaces |
| Aquence 915 Coating | Economical, medium gloss, environmentally friendly corrosion protection coating for steel parts and structures |
| Aquence 915IX | Used to produce a black organic coating on ferrous metal surfaces |
| Aquence 925G | Used to produce a grey, organic, water-based coating on ferrous metal surfaces |
| Aquence 930 Coating | For demanding autodeposition applications like frames and chassis components |
| Aquence 930IX | Used to produce a black organic coating on ferrous metal surfaces |
| AQUENCE BG 143A PRODUCER | Adhesion to poly, fast food bags. Poly handle attachment. |
| AQUENCE BG 30182 PRODUCER | Formulated Resin Emulsion |
| AQUENCE Catalyst K 1000 | Water-based, acid catalyst used to accelerate the crosslinking of specialty emulsion adhesives to create Type I and Type II bonds |
| AQUENCE CATALYST K 2302 | Reduced chalk point catalyst |
| AQUENCE CATALYST K 2306 | An AlCl catalyst |
| AQUENCE CATALYST R 394A | Aromatic isocyanate EPI crosslinker |
| AQUENCE CATALYST R 396 | Crosslinker |
| AQUENCE CD 081A | Duct wrap adhesive. |
| AQUENCE CD 301G | Water-based contact cement |
| AQUENCE CD 380 | Water-based rubber emulsion |
| AQUENCE CD 380P | Water-based rubber emulsion |
| AQUENCE CD 381 | AQUENCE CD 381 is a one part water based roll-coat-able or spray adhesive. |
| AQUENCE CD 381P | AQUENCE CD 381P is a one part water based roll-coat-able or spray adhesive. |
| AQUENCE CD 381Y | AQUENCE CD 381Y is a one part water based roll-coat-able or spray adhesive. |
| AQUENCE CG 034A | High performance. More aggressive and improved adhesion. |
| AQUENCE CG 070A | General purpose. Faster and tackier than 32-638B™. |
| AQUENCE CG 1556 | Troubleshooter, fast setting, good tack, no polypropylene. |
| AQUENCE CG 3130 | General purpose assembly |
| AQUENCE CG 636A | General purpose and low cost. High tack, slower speed vs. 33-9060™. |
| AQUENCE CG 638A | General purpose and lowest cost. Higher tack, speed and retack versus 32-638B™. |
| AQUENCE CG 638B | General purpose and lowest cost. Slower speed and less tack, but better adhesion vs. 33-070A™. |
| AQUENCE CG 763A | High performance/troubleshooter. Most aggressive. Best adhesion. |
| AQUENCE CG 9012 | Higher water resistance. Balance of high tack, fast set and good retack. |
| AQUENCE CG 9060 | High performance. Moderate speed and good machining. |
| AQUENCE CORE 3053 | Good for laminating cardboard and other porous surfaces |
| AQUENCE CORE 3160H | Single ply corewinding, fast setting adhesive, excellent wet tack, good mechanical stability, dries clear |
| AQUENCE CORE 5360 | General purpose, fast setting for core and tube winding; good wet tack and fast setting and repulpable |
| AQUENCE DL 2107 | Lead cross-linkable product |
| AQUENCE DL 210A | Cross-linkable finger joint adhesive |
| AQUENCE DL 2119 | General millwork, cross-linkable adhesive |
| AQUENCE DL 215B | Edge or face gluing cross-linkable adhesive |
| Aquence E2 Reaction Rinse | Seal rinse technology with enhanced chemical resistance |
| Aquence E3 Reaction Rinse | Seal rinse technology with enhanced corrosion resistance |
| AQUENCE ENV 027A | Strongest bonds, most aggressive tack and adhesion. |
| AQUENCE ENV 065A | All extrusion systems. |
| AQUENCE ENV 1265 | Releaseable fugitive applications. |
| AQUENCE ENV 156A VECTORPATCH | High tack for fast machines. |
| AQUENCE ENV 200A | Low viscosity resin seal for stencil application. |
| AQUENCE ENV 2018 | High viscosity, white in color. |
| AQUENCE ENV 2041 | High viscosity, best adhesion, violet in color. |
| AQUENCE ENV 2093 | High viscosity, blue in color. |
| AQUENCE ENV 275A VECTORPATCH | Tackier version of 33-156A™ for very fast machines. |
| AQUENCE ENV 338P | Good for hot and humid conditions |
| AQUENCE ENV 3405 | High resin content, very fast drying, excellent layflat. |
| AQUENCE ENV 349A | New technology. |
| AQUENCE ENV 3541 | Good tack and machining on high speed machines. |
| AQUENCE ENV 3547 | Good tack and machining on high speed machines. |
| AQUENCE ENV 3568 | Fast set and good adhesion for difficult papers. Open end - fast set. |
| AQUENCE ENV 4019 VECTORPATCH | Good balance of tack and very good gumbox stability. One product for seam and window. |
| AQUENCE ENV 4020 VECTORPATCH | Slow drying for use on glassine. |
| AQUENCE ENV 4029 VECTORPATCH | Lead recommendation for low adhesion windows. |
| AQUENCE ENV 4110 | High adhesion PSA. Best combination of adhesion and gumbox stability. |
| AQUENCE ENV 5810 | Boosts tack on automatic inserters. |
| AQUENCE ENV 591A VECTORPATCH | Good balance of tack and gumbox stability, faster setting. |
| AQUENCE ENV 6135HUV VECTORPATCH | General purpose window patch gum |
| AQUENCE ENV 6148 | In-line and off-line gumming. |
| AQUENCE ENV 618A | 33-349A™ without UV indicator. |
| AQUENCE ENV 6198 | Less aggressive but multiple seals. Seal & reseal. |
| AQUENCE ENV 6199 | Low viscosity gives good paper anchorage. |
| AQUENCE ENV 7207UV | Aggressive tack, fair gumbox stability. |
| AQUENCE ENV 7248TUV | Extrusion gum for ITW, Valco and Nordson units |
| AQUENCE ENV 7275BUV | AQUENCE ENV 7275BUV is used as envelope seam gum. |
| AQUENCE ENV 7603 | Least slinging, slow drying. |
| AQUENCE ENV 764A | Lowest viscosity resin/dextrin for stencil application. |
| AQUENCE ENV 767E | AQUENCE ENV 767E |
| AQUENCE ENV 767P | High resin content, very fast remoistening speed, low VOCs. |
| AQUENCE ENV 7770 | Water-based palletizing adhesive |
| AQUENCE ENV 8640UV | Most aggressive adhesion. |
| AQUENCE ENV 888L VECTORSEAL | Fast drying, good remoistening tack, low VOCs. |
| AQUENCE ENV 888P VECTORSEAL | Fast drying, good remoistening tack, low VOCs. |
| AQUENCE ENV 911A | Formulated Vinyl Emulsion Adhesive |
| AQUENCE FB 0999TUV VELOCITY | Formulated Synthetic Emulsion Adhesive |
| AQUENCE FB 121A | For fast machine speeds and difficult to adhere substrates where a high tack, fast setting product is requirements |
| AQUENCE FB 121T | For fast machine speeds and difficult to adhere substrates where a high tack, fast setting product is requirements. |
| AQUENCE FB 5489MUV VELOCITY | Polyvinyl Resin Emulsion |
| AQUENCE FB 5533 | High solids, high viscosity spray grade adhesive. |
| AQUENCE FB 7007HUV | Versatile general purpose patch gum adhesive for envelope equipment that runs at speeds up to 900 EPM |
| AQUENCE FB 711C | Formulated Emulsion Adhesive |
| AQUENCE FB 778AHUV VELOCITY | New Generation extrusion adhesive |
| AQUENCE FB 778ATUV VELOCITY | New Generation extrusion adhesive |
| AQUENCE FB 9170 | Formulated Resin Emulsion Adhesive |
| AQUENCE FB 9192 VELOCITY | High Performance Formulated Emulsion |
| AQUENCE FB 980A VELOCITY | High Performance Formulated Emulsion |
| AQUENCE FD 330R | Contact cement, fast drying, excellent spray |
| AQUENCE GA 7248 CASING | Casing in resin |
| AQUENCE GL 7501EZ | Consumer packaging premium labeling adhesive for coated glass bottles |
| AQUENCE KL 0562 | General purpose laminating product |
| AQUENCE KL 3005 | Low viscosity edge glue product |
| AQUENCE KL 300A | Lead one-part RF and hot press product |
| AQUENCE LA 0276 PRODUCER | Best foam retention for excellent mileage, maintains tack at high foam rate. |
| AQUENCE LA 067A | Resin-dextrin hybrid; high tack and much faster set than dextrins |
| AQUENCE LA 1019 | Dextrin, best layflat. |
| AQUENCE LA 1020 | Formulated Dextrin Adhesive |
| AQUENCE LA 117A | Layflat laminating |
| AQUENCE LA 117H | Nitrate free dextrin adhesive for layflat laminating where good machining, good adhesion and excellent layflat are needed. |
| AQUENCE LA 150A | Fast and aggressive; slightly faster setting than 32-1551™. |
| AQUENCE LA 1551 | Extremely long open time resin for repositionability. |
| AQUENCE LA 155A ULTIMATE CONTROL | High tack, long open time for Asitrades that run no faster than 300 fpm. |
| AQUENCE LA 208A | Neutral pH products. Contact TS for appropriate product. |
| AQUENCE LA 290A | Lead product for non-rod metering, good cleanup |
| AQUENCE LA 5020M | Dextrin, high tack, fast setting, easy cleanup, contains nitrate. |
| AQUENCE LA 5023M | Dextrin, high tack, fast setting, easy clean-up, contains nitrate. |
| AQUENCE LA 5112 | General-purpose packaging adhesive. |
| AQUENCE LA 575A | Artist board, gravure application. |
| AQUENCE LA 6367HUV | Resin, very fast setting, aggressive, can be metered down. 4000 and 7000 series |
| AQUENCE LA 724A | Solid fiber lead product with extremely high tack, fast set speed, and good mileage. |
| AQUENCE LA 774A | Extreme water resistance (passes 24-hour soak with 100% fiber tear). |
| AQUENCE LA 801A PRODUCER | MRE boxes for solid fiber, water-resistant. |
| AQUENCE LA 866B | Highest tack, fastest set speed & best adhesion for fast line speeds. |
| AQUENCE LAM 5137 | 14% concentrate laminating adhesive |
| AQUENCE LAM 6005 | Superior, ready-for-use, laminating adhesive |
| AQUENCE LAM 6005H | 10% concentrate laminating adhesive |
| AQUENCE LG 45 | Consumer packaging adhesive for moderate to high coated glass, returnable/non-returnable, ultimate ice water resistance. |
| AQUENCE LG 45C | High performance, consumer packaging labeling adhesive for glass containers |
| AQUENCE LG 45CH | AQUENCE LG 45CH is intended for use with cold wet returnable bottles. AQUENCE LG 45CH is tackier and better hyper-condensation version of LG 45C. |
| AQUENCE LG 75 | Consumer packaging labeling adhesive, flexible PET and severely over-coated glass. |
| AQUENCE LG 75S | Consumer packaging labeling adhesive, flexible PET - slower setting then LG-75. |
| AQUENCE LP 002A | Consumer packaging adhesive used for container labeling. Formulated resin based adhesive. |
| AQUENCE LP 0265 | AQUENCE LP 0265 is a medium viscosity water based resin adhesive formulated to adhere a variety of substrates. |
| AQUENCE LP 7172 | Consumer packaging adhesive for heavily coated glass, PET, treated PVC-HDPE-PP (Rotary) labeling. |
| AQUENCE LP 7302M | Consumer packaging adhesive, brewery PET, heavily coated glass, PET, treated PVC-HDPE-PP, ice-proof test. |
| AQUENCE OC 900DF | High performance defoamer for corrugating starch adhesive. |
| AQUENCE PET 047A | Consumer packaging adhesive for container labeling. Formulated resin based adhesive. |
| AQUENCE PL 0170 | A synthetic polymer emulsion. |
| AQUENCE PL 0857 | Formulated polyvinyl emulsion adhesive |
| AQUENCE PL 1105 | A Synthetic Polymer Adhesive. |
| AQUENCE PL 1913 | Laminating adhesive. |
| AQUENCE PL 2709 | Water-based Vinyl Adhesive |
| AQUENCE PL 453A | Formulated copolymer emulsion adhesive |
| AQUENCE PL 5670 | Excellent countertop deck laminate adhesive. |
| AQUENCE PL 6100BL | Water-based contact adhesive |
| AQUENCE SL 410A | EPI for finger jointing |
| AQUENCE SL 471A | EPI for edge gluing |
| AQUENCE WL 0272 | General purpose edge and face glue |
| AQUENCE WL 0294 | Vinyl copolymer emulsion adhesive |
| AQUENCE WL 0310 | Vinyl copolymer emulsion adhesive |
| AQUENCE WL 2600 | Versatile woodbonding assembly adhesive |
| AQUENCE WL 4019 | Versatile, crosslinking adhesive |
| AQUENCE WL 501A | Interior flush door product |
| AQUENCE WL 5578 | Designed for extrusion or wheel application. |
| AQUENCE WL 5704 | General purpose assembly |
| AQUENCE WL 8112 | Water-based wrapping adhesive |
| AQUENCE XP 7010 | A consumer packaging synthetic polymer labeling adhesive |
| AQUENCE XP 77 | For use on flexible PET bottles. |
| AS 1116 | Anti-solder paste |
| Bonderite 1020 Iron Phosphate Conversion Coating | Formulated for spray and immersion application to steel surfaces. |
| Bonderite 1030 Iron Phosphate Conversion Coating | Converts the metal surface to a non-metallic, iron phosphate coating that inhibits corrosion and increases the adhesion and durability of paint finishes |
| Bonderite 1040 Iron Phosphate Conversion Coating | Designed for low temperature spray application to steel surfaces. |
| Bonderite 1050 Iron Phosphate Conversion Coating | Designed for low temperature spray application to steel surfaces. |
| Bonderite 1070 Iron Phosphate Conversion Coating | Formulated for spray and immersion application to steel, aluminum and zinc surfaces |
| Bonderite 1080 Iron Phosphate Conversion Coating | Iron phosphate process designed for multi-metal application. |
| Bonderite 1090 Iron Phosphate Conversion Coating | Conversion coating that inhibits corrosion and increases the adhesion and durability of paint finishes |
| Bonderite 1303 | Complex oxide pretreatment for hot dip galvanized or electrogalvanized |
| Bonderite 1303 L | Treatment chemicals for conversion coating |
| Bonderite 1310 | Chrome pretreatment for sheet and stripline applications |
| Bonderite 1402W | Chrome dried in place pretreatment |
| Bonderite 1421 | Zinc phosphate pretreatment is for sheet and stripline applications. |
| Bonderite 1430 | Dry-In-Place Conversion Coating |
| Bonderite 1455 SF | Non-chrome dried in place pretreatment |
| Bonderite 1455-W Wipes Dry in Place Conversion Coating | Dry in place conversion coating for steel. |
| Bonderite 181X | Conversion coating process for cold forming |
| Bonderite 198X | Conversion coating process for cold forming |
| Bonderite 1994 Zinc Phosphate Conversion Coating | Inhibits corrosion and increases the adhesion and durability of electrodeposited finishes |
| Bonderite 2010 Zinc Phosphate Conversion Coating | Polycrystalline zinc phosphate conversion coating designed for multi-metal immersion applications. |
| Bonderite 2101 Zinc Phosphate Conversion Coating | Nickel-free zinc phosphate conversion coating. |
| Bonderite 300X | Conversion coating process for cold forming |
| Bonderite 3080 Zinc Phosphate Conversion Coating | Inhibits corrosion and increases the adhesion and durability of paint finishes |
| Bonderite 3410 Makeup Zinc Phosphate Conversion Coating | Formulated for treating mixed production of steel, galvanized steel, aluminum and zinc alloy coated steel. |
| Bonderite 37 Makeup Zinc Phosphate Conversion Coating | Formulated primarily for treating hot-dip galvanized and certain continuous electrogalvanized surfaces which are difficult to coat with other materials. |
| Bonderite 427 RLK | Water-based |
| Bonderite 4800 | Oxide conversion coating for hot-dip galvanized or electro-galvanized coating |
| Bonderite 7400 Dry in Place Conversion Coating | Formulated for dry-in-place, conversion coating use on steel, galvanized steel and aluminum. |
| Bonderite 769 M Zinc Phosphate Conversion Coating | Formulated for spray and immersion application to cold rolled steel, galvanized steel, electro-galvanized steel, zinc-alloy coated steels, and small amounts of aluminum. |
| Bonderite 880 Makeup Zinc Phosphate Conversion Coating | Ferrous iron-containing, zinc phosphate process for treating steel surfaces. |
| Bonderite 902 | Iron phosphate pre-treatment for sheet and strip line applications. |
| Bonderite 910 | Formulated for spray application on multi-metal substrates prior to electrocoating. |
| Bonderite 952 Zinc Phosphate Conversion Coating | Polycrystalline conversion coating designed for multi-metal spray applications. |
| Bonderite 958 Zinc Phosphate Conversion Coating | Polycrystalline conversion coating designed for multi-metal immersion applications. |
| Bonderite CD-3020 Zinc Phosphate Conversion Coating | Converts the metal surface to a nonmetallic, polycrystalline coating |
| Bonderite CD-3042 Zinc Phosphate Conversion Coating | Zinc phosphating conversion coating chemical |
| Bonderite K-702 | Chrome prepaint treatment for aluminum applications |
| Bonderite LS-1 | Laser scale removal and conversion coating for ferrous surfaces. |
| Bonderite NT-1 Phosphate Free Conversion Coating | Ambient, nanoceramic, phosphate free conversion coating formulated for use in multi-metal applications. |
| Bonderite TecTalis 1200 Makeup A Phosphate Free Conversion Coating | Phosphate-free, reactive, ambient spray conversion coating formulated for use in the treatment of steel, zinc and aluminum surfaces. |
| Bonderite TecTalis 1200 Makeup B Phosphate Free Conversion Coating | Second generation fluorozirconic nanoceramic for multisubstrate processes |
| Bonderite TecTalis 1800 Makeup A Phosphate Free Conversion Coating | Phosphate-free, reactive, ambient immersion conversion coating formulated for use in the treatment of steel, zinc and aluminum surfaces |
| Bonderite ZM-1 Zinc Phosphate Conversion Coating | Inhibits corrosion and increases the adhesion and durability of organic paints and finishes |
| Bondmaster 40-514A | Water-based, pressure sensitive adhesive |
| Deltaforge F-42 | Forging die lubricant |
| Deltaforge F-60A | Water based synthetic forging die lubricant |
| Deltaforge F-87 | Forging die lubricant |
| Deltaglaze 151 | Glass Coating for High Temperature Forging |
| Deltaglaze 153 | Glass Coating for High Temperature Forging |
| Deltaglaze 349 | Glass Compound for Forging, Extrusion |
| Deoxalume 151 | Nitric acid based deoxidizer for aluminum |
| Deoxidine 7005 | Will effectively remove rust, scale and light deposits oil from the surface of metals while destroying corrosion stimulators. |
| Deoxidizer HX-357 | Sulfuric acid based deoxidizer or controlled etchant for aluminum |
| Deoxylyte 100 NC | Chrome-free post treatment for conversion coated aluminum |
| Dorus 51-5659UV | General purpose assembly |
| Dorus 56-3173M | General-purpose adhesive that can be used to bond a variety of materials |
| Dorus 92-3200 | Catalyst |
| Dorus KS-217 | Designed for use in solid wood edgebanding |
| Dorus KS-360/3 | High heat resistant EVA for edgebanding |
| Dorus MS 280/4 Hot Melt | Unfilled, high resistance, and well suited for high speed applications with low weight papers. |
| Dorus MS 3210 Hot Melt | Exceptionally long open time forming strong bonds, good heat-resistance. |
| Dorus MS 8633 Hot Melt Adhesive | Versatile EVA for wood assembly, cove stick applications. |
| Dorus MS 8843 | High green strength, excellent mileage, high heat resistance, bonds to metals and plastics. |
| Dorus ND QW18-1 Polyurethane Resin | Waterborne polyurethane dispersion |
| Dorus ND QW24-1 Polyurethane Resin | Waterborne polyurethane dispersion |
| Dorus ND QW26 Polyurethane Resin | Waterborne polyurethane dispersion |
| Dorus ND QW28 Polyurethane Resin | Waterborne polyurethane dispersion |
| Dorus ND QW35 Polyurethane Resin | Waterborne polyurethane dispersion |
| Dorus ND QW40 Polyurethane Resin | Waterborne polyurethane dispersion |
| Dorus ND QW77 Polyurethane Resin | Solvent-free waterborne polyurethane dispersion |
| Dorus ND QW93 Polyurethane Resin | Waterborne polyurethane dispersion |
| Dorus ND QWF4744 Polyurethane Resin | OH functional aliphatic water-based polyurethane dispersion for use in coating systems |
| Dorus ND SF18 Polyurethane Resin | Solvent free waterborne polyurethane dispersion for formulation of "greener" coatings |
| Dorus ND SF26 Polyurethane Resin | Solvent free waterborne polyurethane dispersion for formulation of "greener" coatings |
| Dorus ND SF5000 | Solvent-free waterborne polyurethane dispersion |
| Dorus ND-4100 | Dorus ND-4100 A high performance, heat reactivatable, one-component polyurethane adhesive for tough elastomeric bond applications. |
| Dorus Permattach 395HC | High performance, heat reactive, one-component polyurethane adhesive. |
| Dorus PL 7709T G | Post-formable vinyl acetate adhesion |
| Dorus PL-452A | Outstanding water-based, pressure sensitive adhesive |
| Dorus PL1617B | Exterior trim and PVC bonding |
| Dorus PL1630B | Exterior trim and PVC bonding |
| Dorus Q-621 | Versatile adhesive for edgebanding |
| Dorus Q-654 | Nearly invisible bond line |
| Dorus R 503A | Aliphatic isocyanate |
| Dorus S 514M | A flammable solvent based synthetic elastomeric adhesive for spray application involving a wide variety of porous and non-porous substrates. |
| Dorus SL 468A | EPI for edge gluing, NON-RF-curing. |
| Dorus SM-2000 | Versatile soft-forming adhesive |
| Dorus Tancotard TB-408 | Decabromodiphenyl oxide and antimony oxide in water. |
| Dorus US-280/4 | Good adhesion to difficult substrates |
| Dorus WL 4010 | One part, pre-catalyzed, type II door product |
| DTI 360 Coolant | Biostable bodymaker coolant for drawing and ironing of aluminum beverage cans |
| DTI 8100-A Post Lube | Post-lubricant applied electrostatically to drawn and ironed aluminum can stock |
| DTI 820 Coolant | Bodymaker coolant/lubricant for drawing and ironing of tinplate food and beverage cans |
| DTI C1-A Cupper | Cupper lubricant for drawing and ironing of aluminum beverage cans |
| DTI CL-500 Cupper | Neat cupper lubricant for drawing and ironing of aluminum beverage cans |
| DTI I-102 Coolant | Biostable bodymaker coolant for drawing and ironing of aluminum beverage cans |
| DTI M3-A Cupper | Cupper lubricant for drawing and ironing of aluminum beverage cans |
| DTI TPS 600 Cupper | Cupper lubricant for drawing and ironing of tinplate food and beverage cans |
| Dualite E030 | Ultra low density expanded polymeric microsphere |
| Dualite E055 | An ultra-low density polymeric product that has an inert exterior coating. This patented process produces a free-flowing, agglomerate-free material. |
| Dualite E065-135D | Low density expanded microsphere |
| Dualite E130-055D | Ultra-low density polymeric shell to which is affixed an inert exterior coating |
| Dualite E130-095D | High performance expanded polymeric microsphere |
| Dualite E130-105D | General purpose expanded polymeric microsphere |
| Dualite E135-040D | Small particle size expanded polymeric microsphere |
| Dualite U005-190D | High temperature, high expanding expandable polymeric microsphere |
| Dualite U010-130D | Low temperature expandable polymeric microsphere |
| Dualite U010-185D | Heat-expandable polymeric microspheres. These microspheres consist of an acrylonitrile copolymer shell which encapsulates a high boiling point liquid. |
| Dualite U017-175D | Mid temperature expandable polymeric microsphere |
| Dualite U018-130 | Low temperature expandable polymeric microsphere |
| Dualite U020-125W | Low temperature expandable polymeric microsphere (wet) |
| Dualite U024-145D | Low temperature expandable polymeric microsphere |
| DURO-TAK AH 115 | Acrylic-rubber hybrid solution pressure sensitive adhesive |
| E&C STYCAST 5952 A/B thermally conductive silicone encapsulant | E&C STYCAST 5952 A/B is a filled, thermally conductive silicone encapsulant. |
| ECCOBOND DS7400UV | Eccobond DS7400UV laminating adhesive and perimeter sealant is desgined for high throughput display assembly that require protection against humidity. |
| ECCOBOND UF 3130 underfill | LOCTITE ECCOBOND UF 3130 is designed for use in heat sensitive optoelectronic components and other microelectronic devices. |
| Eccobond UV9001 | Eccobond UV9001 is a dual cure sealant and adhesive used in switch leads applications used in consumer and industrial markets. |
| Electrodag 437 | Electrodag 437 is a copper-based EMI shielding coating designed to provide electromagnetic compatibility (EMC) in electronic equipment housing. |
| Electrodag 440 AS | Electrodag 440 AS is a nickel-based EMI shielding coating designed to give electromagnetic compatibility (EMC) used for electronic equipment. |
| Electrodag 965SS | Electrodag 965SS is a graphite-based polymer thick film ink for use in the production of low voltage circuitry on polyester. |
| Electrodag PF-021 UV Curable Encapsulant | Electrodag PF-021 is a UV curable encapsulanting photopolymer. |
| Electrodag PM-460A | Electrodag PM-460A is a high speed printing fast drying silver ink. Suitable for applications using flexographic or rotogravure printing techniques. |
| Electrodag SP-413 | Electrodag SP-413 is a silver based EMI shielding coating |
| Emralon 309 | PTFE fluorocarbon resin |
| Emralon 329 | Emralon 329 is a fast-drying, resin bonded, fluorocarbon dry film lubricant capable of coating wood, metal, rubber, plastic, and glass substrates. |
| Emralon 330 | Fluoropolymer lubricant coating |
| Emralon 333 | High performance fluoropolymer lubricant coating |
| Emralon 334 | Resin Bonded Fluoropolymer Lubricant |
| Emralon 8301 | Air dry water borne lubricant coating |
| Emralon GP-1904 | Fluoropolymer lubricant coating |
| Euromelt 112US | Consumer packaging hot melt with ow viscosity; semi pressure sensitive hot melt for roll fed container labeling |
| Euromelt 3281 Hot Melt | Consumer packaging hot melt for Bear, Burt and Standard Knapp roll through labels. |
| Euromelt 362 | Consumer packaging hot melt, high performance, full pressure sensitve hot melt for container labeling |
| Euromelt 493A Hot Melt | Consumer packaging hot melt adhesive for bottle labeling |
| Euromelt 4944 Hot Melt | Consumer packaging hot melt, clear product that provides a wide operating range especially on cold wet bottles. |
| Euromelt 746US | Medium viscosity hot melt pressure sensitive designed for permanent tape and label applications |
| Euromelt 799US | Medium viscosity hot melt pressure sensitive designed for crystal clear, no-look label applications |
| Euromelt 80-8626 | Medium viscosity, repositionable, pressure sensitive hot melt adhesive for use on pre-applied labels |
| Euromelt 80-8669 | Removable pressure sensitive hot melt |
| Euromelt 80-8707 | Long open time, general purpose hot melt |
| Fixmaster® Fast Cure Epoxy Mixer Cups | General purpose epoxy. Sets in 5 to 15 minutes. |
| Fixodine AO | Powder based titanium containing surface conditioner designed to promote the formation of a dense, complete and fine grained phosphate coating for use in in-line wire and rod phosphating applications. |
| Fixodine M | Powdered surface conditioning agent formulated to promote a fine, dense crystalline phosphate coating on iron and steel surfaces. |
| Fixodine Z10 | Powder based surface conditioner designed to promote a refined crystalline structure when in a zinc phosphate coating application. |
| Fixodine ZL | Liquid based surface conditioner designed to promote a refined crystalline structure when in a zinc phosphate coating application. |
| Frekote 1450 Mold Release Agent | Sacrificial mold release agent, water based, specifically formulated for use with resin/asbestos products |
| Frekote 1450-HS Mold Release Agent | Water based mold release solution specifically formulated for use with resin / asbestos products. |
| Frekote 1711 Mold Release Agent | Sacrificial mold release agent offers superb release properties, choice of finish, and excellent part detail to meet your specific molding requirements. |
| Frekote 1711-I Mold Release Agent | Sacrificial mold release agent offers a high gloss finish with excellent part detail and mold geometry retention |
| Frekote 44-NC Mold Release Agent | Non-CFC release agent for the release of epoxies, polyester resins, thermoplastics, adhesives, and for fiberglass reinforced polyester (FRP) composites |
| Frekote 48-NC Mold Release Agent | Non-CFC release agent designed to provide multiple releases with no contaminating transfer |
| Frekote 55-NC Mold Release Agent | Non-CFC release agent designed for fiberglass reinforced polyester (FRP) composites. Provides multiple releases with no contaminating transfer. |
| Frekote 700-NC Mold Release Agent | Non-CFC, semi-permanent, multiple release polymer resin that effectively releases all thermoset resins |
| Frekote 710-LV Mold Release Agent | A low VOC Semi-permanent release agent for high performance composite assembly |
| Frekote 710-NC Mold Release Agent | Non-CFC, semi-permanent, multiple release polymer resin that effectively releases all thermoset resins |
| Frekote 720-NC Mold Release Agent | A semi-permanent release agent formulated specifically for release of all cast polymer products and for releasing highly filled resins. |
| Frekote 770-NC Mold Release Agent | Non-CFC, semi-permanent, multiple release polymer resin for fiberglass reinforced polyester (FRP) composites. Effectively releases all thermoset resins. |
| Frekote 800-NC Mold Release Agent | Non-CFC, designed to form a semi-permanent release film on mold surfaces above 150°C (300°F) |
| Frekote 810-NC Aerosol Mold Release Agent | Non-CFC, semi-permanent, multiple release polymer resin designed to form a semi-permanent release interface on mold surfaces with application temperatures from room temperature to 135°C (275°F). |
| Frekote 815-NC Mold Release Agent | Non-CFC, semi-permanent, multiple release polymer resin designed to form a semi-permanent release interface on mold surfaces with application temperatures from room temperature to 135°C (275°F). |
| Frekote 901WB Mold Release Agent | Proprietary water-based emulsion developed for releasing aerospace and other high performance composite structures |
| Frekote 915WB Mold Release Cleaner | A water based cleaner developed for removing residue from mold surfaces |
| Frekote AC-4368 Mold Release Agent | Sacrificial mold release agent, all-purpose, silicone based release agent |
| Frekote Aqualine C-600 Mold Release Agent | Water based emulsion originally developed for releasing large scale parts such as wind blades. |
| Frekote Aqualine PUR-100 Mold Release Agent | Water-based, semi-permanent release agent for releasing urethane elastomers. |
| Frekote Aqualine R-100 Mold Release Agent | Water-based release agent designed for application to mold surfaces preheated to between 60°C (140°F) and 182°C (360°F). |
| Frekote Aqualine R-110 Mold Release Agent | Water-based release agent designed for rubber molding. |
| Frekote Aqualine R-120 Mold Release Agent | Water based semi-permanent release agent for most types of rubber-to-metal bonding applications and other types of rubber releases including medical applications. |
| Frekote Aqualine R-150 Mold Release Agent | Water-based mold release agent designed for the more difficult molding applications and for silicone and rubber goods. |
| Frekote Aqualine R-180 Mold Release Agent | Water-based mold release agent for the most difficult molding applications including silicone and rubber goods. |
| Frekote Aqualine R-220 Mold Release Agent | A water based release agent formulated for silicone and rubber goods and the most difficult to release molding applications such as EPDM and HNBR compounds |
| Frekote Aqualine R-550 Mold Release Agent | Formulated for the most difficult rubber molding applications, especially parts with high aspect ratios |
| Frekote Aqualine R-95 Mold Release Agent | Water-based mold release agent for easy molding application of rubber goods |
| Frekote Aqualine RC-321 Mold Release Agent | Water dilutable concentrate that provides a durable release film for most rubber molding applications |
| Frekote Aqualine Rotolease Mold Release Agent | Water based mold release agent designed for rotational molding applications |
| Frekote Aqualine RS-100 Mold Release Sealer | Rotational mold release used to seal micro-porosity in steel, and chrome plated molds |
| Frekote B-15 Mold Release Sealer | Sealer for molds with microporosity problems, small surface scratches or imperfections |
| Frekote C-200 Mold Release Agent | Unique water based release agent designed to provide multiple releases per application with no contaminating transfer. |
| Frekote C-210 Mold Release Agent | Unique water-based release agent with high temperature stability for thermoset composites |
| Frekote CMR Mold Release Agent | Mold release agent designed to dissolve and remove polymer, composite, and other residues from polyester molds without dulling the mold surface. |
| Frekote CS-122 Mold Release Sealer | Frekote CS-122 is designed to form a thick, inert, thermally stable coating that is compatible with most solvent-based Frekote release agents. |
| Frekote CS-123 Mold Release Sealer | Frekote CS-123 is designed to form a thick, inert, thermally stable coating that is compatible with most solvent-based Frekote release agents. |
| Frekote CUR Mold Release Agent | Mold release designed to form a semi-permanent release coating on the mold surface for rigid, cast polyurethane products |
| Frekote EFR Mold Release Agent | Semi-permanent, polymeric release agent for flange sealing on composite molds |
| Frekote EXITT Mold Release Agent | A sacrificial mold release developed for urethane elastomer systems |
| Frekote EXITT-EM Mold Release Agent | Sacrificial mold release agent for epoxies and urethanes |
| Frekote EXITT-I Mold Release Agent | Sacrificial mold release agent offers superb release properties, choice of finish, and excellent part detail to meet your specific molding requirements |
| Frekote FMS Mold Release Sealer | Mold sealer for fiberglass reinforced polyester, epoxy and other composite molds |
| Frekote FMS-100 Mold Release Sealer | Solvent-based sealer specifically formulated for use on FRP, epoxy, or other composite mold surfaces |
| Frekote Frewax Mold Release Agent | Unique combination of wax and a semi-permanent polymer mold release agent for fiberglass reinforced polyester (FRP) composites |
| Frekote FRP-NC Mold Release Agent | Semi-permanenant mold release agent specifically formulated for fiberglass reinforced polyester (FRP) gel coats |
| Frekote HMT Mold Release Agent | Hot mold touch up version of Frekote® 44-NC™ |
| Frekote HMT-2 Mold Release Agent | Formulated for use on molds with temperatures above 60°C (140°F) |
| Frekote LIFFT Mold Release Agent | Silicone, solvent based, sacrificial mold release agent offering a high gloss finish with excellent part detail and mold geometry retention. |
| Frekote LIFFT-1 Mold Release Agent | Sacrificial mold release agent offers a high gloss finish with excellent part detail and mold geometry retention |
| Frekote PMC Mold Release Cleaner | Mold release cleaner designed to dissolve and remove wax from polyester molds without dulling the surface |
| Frekote PUR-NC Mold Release Agent | Non-CFC, semi-permanent, multiple release polymer resin for rigid, cast polyurethane products |
| Frekote Rel-Eaze Mold Release Agent | A high performance, semi-permanent mold release product developed for releasing sand cores |
| Frekote Rimlease 8 Mold Release Agent | Sacrificial mold release agent specifically formulated for use as a release interface for RIM and R/RIM polyurethane processes. |
| Frekote S-50 Mold Release Agent | Sacrificial mold release agent offers excellent release and slip properties and is recommended for the most demanding silicone rubber molding applications |
| Frekote SOLO Mold Release Agent | A unique polymer release agent designed for all gel-coat fiberglass reinforced and filled polyester composites |
| Frekote WOLO HS Mold Release Agent | A unique polymer release agent with high slip characteristics developed for release of low VOC gel-coat and other tough releasing polyester structures. |
| Frekote WOLO LV Mold Release Agent | Unique low VOC polymer release agent that quickly cures and provides for multiple releases of all polyester resins. |
| Frekote WOLO Mold Release Agent | A semi-permanent release agent for polyester gel-coat parts. Designed for fiberglass reinforced polyester (FRP) composites |
| Frekote WOLO-HL Mold Release Agent | Solvent-based polymer release agent for fiberglass reinforced polyester (FRP) composites with a unique high slip formulation that cures quickly and provides multiple releases for low VOC polyester gel-coat and other tough releasing polyester structures |
| Granocoat 342 | Non-chrome acrylic for long term passivation of galvanized and galvalume substrates |
| Granocoat ZE | Zinc rich, weldable primer |
| HYSOL 190024LV | HYSOL 190024LV single component, UV curable adhesive. |
| Hysol 3318LV One component UV coating and sealant | Hysol 3318 LV is a one-component, fast cure, UV coating and sealant used in LCD module assembly. |
| Hysol 3329 | Encapsulant-Fill |
| Hysol 3500 | A reworkable room temperature flow underfill for CSP & BGA devices. It cures at low temperatures and is a fast cure underfill providing superior processing advantages. |
| HYSOL 3508NH | HYSOL 3508NH is designed to cure during Pb-free solder reflow while allowing self-alignment of IC components. |
| Hysol AC0305 | Universal extrudable heat seal coating. |
| Hysol AL 2000 Primer | Nitrile / phenolic, water based primer |
| Hysol CB0260 | High performance encapsulant |
| Hysol CB0260-1 | High performance encapsulant |
| Hysol CB064/FP4653 | High purity, low stress, liquid, self-leveling encapsulant material. |
| Hysol CE3920 | Dispensible, fast cure, general conductive, Pb-free paste adhesive alternative to solder. |
| Hysol CF3350 | Hysol CF3350 adhesive film offers an excellent balance of adhesion strength, electrical and thermal conductivity, and processability. It is especially suited for RF applications. |
| Hysol DC0114 | Die edge coating on flip chips. |
| Hysol DP1004 | Hysol DP1004 is an epoxy encapsulant used on ink jet applications as a structural die attach. |
| HYSOL DS6000 | HYSOL DS6000 is a one component adhesive sealant designed for display assembly applications. It exhibits high compatibility with liquid crystal materials. |
| HYSOL DS7301 | HYSOL DS7301 adhesive sealant is designed for display assembly applications that require protection against humidity and oxygen. |
| Hysol E-3239 | Hysol E-3239 is an adhesive encapsulant used in ink jet applications and other MEMS devices |
| HYSOL E1159 | HYSOL E1159 reworkable underfill for CSP and BGA. |
| Hysol E1172A | An innovative nonreworkable, capillary flow underfill. |
| Hysol E1216 | An innovative nonreworkable, capillary flow underfill for CSP, BGA or flip chip devices. |
| HYSOL E1216M | HYSOL E1216M capillary flow underfill is designed for high volume assembly operations requiring a very fast flowing underfill that cures in a a single reflow cycle. It is used in CSP, BGA and Flip Chip BGA applications. It is specifically formulated to eliminate anhydride-type curing agents for those who prefer to work with anhydride-free products. |
| Hysol E1926 | A nonreworkable, wafer-level underfill that provides excellent thermal reliability and cures relatively fast compared to standard first level underfills. |
| Hysol EA 9150 | RTM resin, 250°F/121°C service, epoxy, two component |
| Hysol EA 9203 Primer | Adhesion promoting coating, room temperature cure |
| Hysol EA 9257 Primer | Adhesive primer, solvent based, high temperature, 350°F/177°F curing, chromated |
| Hysol EA 9258.1 Primer | High temperature, water-based, chromated adhesive primer |
| Hysol EA 9309.3NA | Toughened paste, high peel, two component, ambient cure, 180°F/82°C service |
| Hysol EA 9313 | Toughened paste, high peel, two component, ambient cure, 180°F/82°C service |
| Hysol EA 9320NA | Toughened paste, high peel, two component, ambient cure, 180°F/82°C service |
| Hysol EA 9321 | Filled paste, 250°F/121°C service temperature, ambient cure |
| Hysol EA 9323 | Filled paste, 250°F/121°C service temperature, ambient cure |
| Hysol EA 9330 | Toughened paste, thixotropic, 180°F/82°C service |
| Hysol EA 9330.3 | Toughened paste, thixotropic, 180°F/82°C service |
| Hysol EA 9346.5 | Toughened paste, one part, elevated cure, 250F/121°C service |
| Hysol EA 934NA | Filled paste, 300°F/149C service temperature, ambient cure |
| Hysol EA 9359.3 | Toughened paste, high peel strength, volumetric mix ratio, 200°F/93°C service temperature |
| Hysol EA 9360 | Toughened paste, high peel strength, volumetric mix ratio, 200°F/93°C service temperature |
| Hysol EA 9361 | Toughened paste, high elongation, 140°F/60°C service temperature |
| Hysol EA 9371 | Toughened paste, high elongation, 140°F/60°C service temperature |
| Hysol EA 9377 | Filled paste, liquid shim, non-microcracking |
| Hysol EA 9380 | Toughened paste 250°F/121°C service temperature, structural |
| Hysol EA 9380.05 | High degree of cure after a low temperature cure time that offers strength, toughness and high temperature resistance of heat curing film adhesives with greater flexibility and ease of use. |
| Hysol EA 9390 | Low viscosity resin, composite repair, laminating, 350°F/177°C service temperature |
| Hysol EA 9392 | Toughened paste, 350°F/177°C service temperature, thixotropic |
| Hysol EA 9394 | Filled paste adhesive, thixotropic, liquid shim, 350°F/177°F service temperature, low peel |
| Hysol EA 9394 / C-2 | Filled paste, elevated cure, 450°F/232°C service temperature, high temperature |
| Hysol EA 9394.2 | Filled paste, liquid shim, fast cure, 225°F/107°C service temperature |
| Hysol EA 9395 | Non-metallic filled paste adhesive, thixotropic, liquid shim, 350°F/177°F service, low peel |
| Hysol EA 9396 | Low viscosity resin, 350°F/177°C service temperature, composite repair resin, room temperature cure |
| Hysol EA 9396 / C-2 | Low viscosity resin, composite repair, laminating, 400°F/204°C service temperature, elevated cure |
| Hysol EA 9396.6MD | Syntactic low density paste, 300°F/149°F service, room temperature cure, lightweight |
| Hysol EA 956 | Low viscosity resin, 300°F/149°C service temperature, repair resin, room temperature cure |
| Hysol EA 9602.3 | Metal bond film adhesive, 250°F/121°C service temperature |
| Hysol EA 960F | Lightweight fairing compound, 200°F/93°C service temperature, low density, sandable |
| Hysol EA 9628 | Metal bond film adhesive, 250°F/121°C service temperature |
| Hysol EA 9628H | Metal bond film adhesive, 250°F/121°C service temperature |
| Hysol EA 9657 | Film adhesive, 400°F/204°F service temperature |
| Hysol EA 9658 | Film adhesive, high temperature, 420°F/216°C service temperature |
| Hysol EA 9673 | Bismalimide film adhesive, 550°F/288°C service temperature |
| Hysol EA 9681 | An epoxy film adhesive for bonding applications. |
| Hysol EA 9686 | Film adhesive, 250°F/121°C cure, 300°F/149°C service temperature |
| Hysol EA 9689 | Film adhesive, high temperature, 420°F/216°C service temperature |
| Hysol EA 9695 | Film adhesive, composite bonding, 300°F/149°C service temperature |
| Hysol EA 9696 | Film adhesive, metal or composite bond |
| Hysol EA 9815 | Paste adhesive, one part, elevated cure, expanding, 250°F/121°C service temperature |
| Hysol EA 9820 | High-density, one-component epoxy syntactic used on honeycomb composite parts requiring high compressive strength at temperatures up to 350°F (177°C). |
| Hysol EA 9825 | Low-density, one-component epoxy syntactic used on honeycomb composite parts requiring high compressive strength at temperatures up to 350°F (177°C). |
| Hysol EA 9833.1 | Core splice, bismaleimide, 450°F/232°C service temperature |
| Hysol EA 9895 | Peel ply, pre-impregnated, polyester scrim |
| Hysol EA 9896 | Resin impregnated nylon peel ply used for the surface preparation of composite substrates. |
| Hysol ECCOBOND 104 | A two component, heat cure, epoxy paste adhesive with outstanding physical and dielectric properties and service temperatures up to 230°C. |
| Hysol ECCOBOND 2332 | One component, low temperature, high strength paste adhesive. |
| HYSOL ECCOBOND 2332-17 | HYSOL ECCOBOND 2332-17 is a solventless one component epoxy adhesive that develops high bond strength when cured at temperatures as low as 100 to 130°C. |
| HYSOL ECCOBOND 276/Catalyst 17 | HYSOL ECCOBOND 276 Catalyst 17 epoxy is formulated not to sag or run during cure when applied on loose fitting parts set on vertical or overhead surfaces. |
| HYSOL ECCOBOND 281 BLK epoxy adhesive | HYSOL ECCOBOND 281 BLK epoxy adhesive |
| HYSOL ECCOBOND 281 epoxy paste | HYSOL ECCOBOND 281 is a one component filled thixotropic paste, |
| Hysol ECCOBOND 282 | One component, silk screenable, heat cure, viscous epoxy paste adhesive with high thermal conductivity. |
| Hysol ECCOBOND 285 | A highly filled, thermally conductive, thixotropic epoxy paste with low CTE. |
| Hysol ECCOBOND 45-Catalyst 15 | A two component, room temperature curing, variable flexibility epoxy paste adhesive. |
| Hysol ECCOBOND 56C/CAT 11 | Electrically conductive paste adhesive. |
| Hysol ECCOBOND 57C | Two component, room temperature cure, paste adhesive. |
| Hysol ECCOBOND 59C | Two component, flexible, low temperature cure paste adhesive. |
| Hysol ECCOBOND 8177-0 | Heat cure, general conductive, epoxy paste adhesive. |
| HYSOL ECCOBOND 927-10 epoxy adhesive | HYSOL ECCOBOND 927-10 epoxy adhesive for medical applications. |
| Hysol ECCOBOND A164-1 | Heat cure epoxy paste adhesive |
| Hysol ECCOBOND A312-20 | One component, flexible, fast cure |
| Hysol ECCOBOND A316-48 | One component, heat resistant, fast heat cure, epoxy paste adhesive |
| Hysol ECCOBOND A401 | Good thermal conductivity; good high temperature resistance paste adhesive - bonds well to metal, glass, plastics and ceramics. |
| Hysol ECCOBOND C850-6 | Strong, hot adhesion and good anti-migration. |
| Hysol ECCOBOND C850-6L | A general conductive, low viscosity version of C850-6. |
| Hysol ECCOBOND C860-1J | Electrically conductive paste adhesive. |
| Hysol ECCOBOND C990 | One-component, general conductive, silver-filled epoxy paste adhesive. |
| Hysol ECCOBOND CA3150 | Snap curable, low temperature cure, electrically conductive adhesive with excellent adhesion and reliability of Cu and Al substrates. |
| Hysol ECCOBOND CA3152 | Dispensible, low temperature, snap cure paste adhesive. |
| Hysol ECCOBOND CA3556HF | Electrically conductive paste adhesive |
| Hysol ECCOBOND CE3103 | Heat cure, tin and tin lead compatible, paste adhesive |
| Hysol ECCOBOND CE3103WLV | Electrically conductive, tin and tin lead compatible adhesive paste for thin film PV assembly. |
| Hysol ECCOBOND CE3104WXL | Electrically conductive, tin and tin lead compatible, paste adhesive with superior contact resistance stability. Viscosity optimized for screen- and/or stencil-printing. |
| Hysol ECCOBOND CE3126 | Anisotropic adhesive |
| Hysol ECCOBOND CE3513 | Electrically conductive paste adhesive. |
| Hysol ECCOBOND CE3516LCL | General conductive paste adhesive with low outgassing. |
| Hysol ECCOBOND CE3520-3 | One component, flexible, nickel-filled paste adhesive |
| Hysol ECCOBOND CE3535 | Fast cure, tin and tin lead compatible, Pb-free alternative to solder |
| Hysol ECCOBOND CE3804 A/B | Electrically conductive paste adhesive. |
| Hysol ECCOBOND CE8500 | Electrically conductive paste adhesive |
| HYSOL ECCOBOND CT4042-1 A/B | HYSOL ECCOBOND CT4042-1 A/B is a two component silver-filled, easy to apply, conductive epoxy paste adhesive. It is recommended for chip bonding in microelectronics applications. It is a lower viscosity version of ECCOBOND CT4042 adhesive. |
| HYSOL ECCOBOND CT5047-2 A/B | HYSOL ECCOBOND CT5047-2 A/B is a two component electrically conductive adhesive designed to make electrical connections where hot soldering is impractical or to make electrical connections to conductive plastics at locations which cannot be subjected to high temperatures. |
| Hysol ECCOBOND D125F | Surface mount adhesive designed for high speed dispensing. |
| HYSOL ECCOBOND D125F-DR | HYSOL ECCOBOND D125F-DR surface mound adhesive is designed for use in high-speed pneumatic and positive displacement dispensers. |
| HYSOL ECCOBOND DS7300 | HYSOL ECCOBOND DS7300 one component non-conductive epoxy perimeter sealant is designed to be used in display applications. |
| Hysol ECCOBOND DX-10C | Epoxy base clear type. Low viscosity paste adhesive. |
| Hysol ECCOBOND DX-20C | Dielectric paste adhesive |
| Hysol ECCOBOND E1470 | B-stageable, fast cure and dispensible. |
| Hysol ECCOBOND E3200 | Flexible, low temperature, fast cure. |
| Hysol ECCOBOND E3503-1 | Thermally conductive, low temperature heat cure die attach paste adhesive. |
| HYSOL ECCOBOND E3526 | HYSOL ECCOBOND E3526 is specially developed for ferrite core bonding applications. |
| HYSOL ECCOBOND E3526-5 | HYSOL ECCOBOND E3526-5 is especially developed for ferrite core bonding applications. |
| Hysol ECCOBOND E6752 | A one component, low temperature cure, surface mount adhesive that can be applied easily without stringing. |
| Hysol ECCOBOND E8502-1 | This is a low modulus, thermally conductive, heat cure epoxy paste adhesive. |
| HYSOL ECCOBOND G500 | HYSOL ECCOBOND G500 is a general purpose epoxy adhesive and sealant that cures to a high gloss finish. |
| Hysol ECCOBOND G500HF | Electrically non-conductive paste adhesive. |
| Hysol ECCOBOND G757HF | Electrically non-conductive flexible paste adhesive. |
| HYSOL ECCOBOND G757HF-D | HYSOL ECCOBOND G757HF-D is a low halogen, non-conductive epoxy adhesive for ferrite bonding applications. |
| Hysol ECCOBOND G909 | One component snap curable electrically conductive paste adhesive. |
| Hysol ECCOBOND S-3869 | Electrically non-conductive paste adhesive. |
| Hysol ECCOBOND TE3530 | One component, low temperature heat cure thermally conductive epoxy paste adhesive. |
| Hysol ECCOBOND UV9000 Light Cure Adhesive | One component, low temperature, UV cure, thermally conductive epoxy adhesive. |
| Hysol ECCOBOND UV9085 | Designed as a faster curing, high thixotropic adhesive that gives good flow control and adhesion for a thick bondline. |
| Hysol ECCOBOND XCE3111 | One component, snap curable, electrically conductive paste adhesive. |
| Hysol ECCOCOAT C110 | Silver-filled epoxy coating. |
| Hysol ECCOCOAT C110-5-4 | One component, heat cured, non-bleeding, solvent-based, flexible, silver-filled epoxy coatings. |
| HYSOL ECCOCOAT C910-3 termination coating | HYSOL ECCOCOAT C910-3 epoxy based, nickel plateable termination coating is recommended for use in the assembly of passive components. |
| Hysol ECCOCOAT CP8825 | Silver coating. |
| HYSOL ECCOCOAT CT5030 Catalyst B97 conductive ink | HYSOL ECCOCOAT CT5030 Catalyst B97 is a conductive ink designed to provide thin coating used in shielding and grounding applications. |
| Hysol ECCOCOAT PC355-1 | Lead-free, transparent, one-component protective urethane varnish system that is dry to the touch in under 30 minutes. |
| HYSOL ECCOCOAT PC355-1FL conformal coating | HYSOL ECCOCOAT PC355-1FL flexible thermoplastic varnish is formulated to protect and insulate printed wiring boards both on the component and the soldered side. |
| Hysol ECCOCOAT SC3613 | Heat curable, optically clear, high purity, silicone, one-component coating to be applied by brush, dip or flow coating. |
| Hysol ECCOCOAT U7510-1 | One component polyurethane |
| Hysol ECCOCOAT UV7993 | One component urethane acrylate |
| HYSOL ECCOSEAL 7100 | HYSOL ECCOSEAL 7100 adhesive sealant is designed for high throughput display assembly that require protection against humidity and oxygen. |
| Hysol ECCOSEAL 7200 | Display sealant |
| Hysol EE0079/HD0070 | Encapsulant-potting two component, heat cure, epoxy adhesive. |
| Hysol EE1068 | Two component, room temperature cure, encapsulants potting epoxy. |
| Hysol EE1068/HD3404 | Two component, room temperature cure, encapsulants potting epoxy. |
| HYSOL EE1117-HD3561 epoxy system | HYSOL EE1117-HD3561 epoxy system is designed for use as a sealant or for potting electronic devices. |
| Hysol EO0202 | One component, epoxy potting/adhesive compound designed to be crack resistant when used on metal surfaces such as filter endcaps. |
| Hysol EO1016 | Hysol EO1016 is a UL94V-0 encapsulant for Smartcards and watch IC's. Nonabrasive filler allows for grinding if necessary. |
| Hysol EO1057 | Low viscosity version of EO1016 UL94V-0 encapsulant for Smartcards and watch IC's. |
| Hysol EO1058 | Hysol EO1058 is a single component epoxy system that cures at 125°C and provides excellent environmental and thermal protection to encapsulated parts. |
| Hysol EO1060 | Hysol EO1060 is a general purpose, low glob formulation for lower CTE and lower ionic than EO1016 content for more demanding applications. |
| Hysol EO1061 | Hysol EO1061 is a medium glob formulation for lower CTE and lower ionic than EO1016 content for more demanding applications. |
| Hysol EO1062 | Hysol EO1062 is a general purpose, high glob version of EO1061. |
| Hysol EO1072 | Hysol EO1072 is a one component, general purpose, high performance epoxy encapsulant with high Tg and low extractable ionics. |
| Hysol EO1080 | Low CTE version of EO1016. |
| Hysol EO1086 | Hysol EO1086 is a one-component epoxy encapsulant. |
| Hysol EO1088 | One component encapsulants potting epoxy. |
| HYSOL EO7021 | HYSOL EO7021 encapsulant for use in smart card chip module applications. |
| HYSOL EO7029 | HYSOL EO7029 encapsulant for smart card applications. |
| Hysol EO7038 | Hysol EO7038 is a one-component epoxy potting compound, formulated to protect sensors used in harsh environments, such as automotive applications |
| HYSOL EO7039 | HYSOL EO7039 encapsulant is designed for attachment of integrated circuits and components to advanced flexible substrates. |
| Hysol EO8007 | Hysol EO8007 (formerly Loctite 99700) is a unique 100% reactive, 100% solids epoxy insulating resin. |
| Hysol EO8012 | Filled, flame retardant, heat activated, fast cure, 100% solids epoxy UL recognized to UL-94-V-0, 1/4" thickness testing. |
| Hysol ES0614 | Undiluted epoxy, low viscosity casting system that exhibits exceptional resistance to impact and thermal shock. |
| Hysol ES0618 | Hysol ES0618 is a filled epoxy system with a high operating temperature and long pot life. |
| Hysol ES1000 | Black, low cost, flexible, capable of UL94HB, resistant to thermal shock, non-abrasive filled, high impact strength, long pot life |
| Hysol ES1002 | Black, low cost, flexible, capable of UL94V-0, non-abrasive filled, long pot life. |
| Hysol ES1004 | Hysol ES1004 is capable of UL94V-0, stable to 155°C. |
| Hysol ES1301 | Silica filled epoxy casting system with long working time, excellent impregnation of fine windings |
| Hysol ES1900 | Clear, low shrinkage, excellent chemical resistance, strong bond to substrates |
| Hysol ES1901 | Tough, fast setting, optically clear, low viscosity, room temperature curing, chemical resistant, industrial grade epoxy adhesive potting/encapsulating material. |
| Hysol ES1902 | Clear, transparent, very fast UV gel with thermal co-cure, excellent dimensional stability, low viscosity, easy to handle |
| HYSOL ES1904 | HYSOL ES1904 is an opaque, medium-viscosity epoxy resin system recommended for small potting and laminating applications. |
| Hysol ES2202 | High heat distortion temperature, Excellent chemical resistance, excellent performance under high moisture and humidity. |
| Hysol ES2207 | High heat distortion temperature, low expansion, dimensionally stable |
| Hysol ES2500 | Black, fast gel, capable of UL1446 to 180C and UL94HB at 6mm, Easy handling, resilient |
| Hysol ES4512HF Non-Conductive Potting Compound | Hysol ES4512HF is a two-part non-conductive potting compound. It is used in the consumer & Industrial market. |
| Hysol FF2200 | Reflow encapsulant designed for the assembly and protection of flip chip semiconductor devices utilizing a single material approach. |
| Hysol FF2300 | Hysol FF2300 is a no-flow underfill for eutectic and lead-free applications. |
| Hysol FF6000 | Hysol FF6000 is a flux with the additional features and benefits of an epoxy flux. |
| Hysol FP0087 | Low stress fill for potting automated sensor and diodes; high Tg. |
| Hysol FP0114 | Low viscosity, fast flow, epoxy based material designed for capillary underfill on flip chip applications. |
| Hysol FP4323 | Hysol FP4323 is a high purity liquid epoxy encapsulant for chip on board (plastic substrate) and plastic PGA applications. |
| Hysol FP4401 | Hysol FP4401is a low flow, high purity liquid epoxy encapsulant. |
| Hysol FP4410HF | Hysol FP0087 is low stress fill for potting automated sensor and diodes, high Tg. |
| Hysol FP4450 | Hysol FP4450 is an industry standard fill material for fills or cavity down BGAs. |
| Hysol FP4450HF | Hysol FP4450HF is a high flow version of FP4450LV using synthetic filler for use in fine wire and low alpha fills applications. |
| Hysol FP4450LV | Hysol FP4450LV is a low viscosity version of FP4450 (Fills) incorporating cleaner resins. |
| Hysol FP4451 | Hysol FP4451 is an industry standard damming material for BGAs. |
| Hysol FP4451TD | Hysol FP4451TD is a tall dam version of FP4451 for applications requiring a taller, narrower dam. Ionically cleaner also. |
| Hysol FP4460 | Hysol FP4460 is a general purpose, high purity, low stress glob top semiconductor encapsulant with improved moisture resistance and working life compared to earlier generation products. |
| Hysol FP4470 | High adhesion version of FP4450 for 260°C L3 JEDEC performance. |
| HYSOL FP4502 flip chip underfill | HYSOL FP4502 is a flip chip underfill. |
| Hysol FP4526 | Hysol FP4526 epoxy underfill is designed for capillary flow on flip chip applications. |
| Hysol FP4530 | Hysol FP4530 is snap cure flip chip underfill for FC on flex. Designed for gap size down to 25 microns. |
| Hysol FP4531 | Hysol FP4531 is a snap cure fast flow, non-reworkable underfill for CSP applications. |
| Hysol FP4545FC | Hysol FP4545FC is a low viscosity version of FP4548FC |
| Hysol FP4547 | Hysol FP4547 is a fast-flowing, low stress underfill for fine-pitch flip chip applications. |
| Hysol FP4549 | Hysol FP4549 is used for fine-pitch flip chip applications, fast flowing, low stress underfill. |
| Hysol FP4549HT | Hysol FP4549HT is an aluminum nitride-filled version of FP4549 for high thermal applications. |
| Hysol FP4581 | Hysol FP4581 is used on lead-free flip chip packages (L3 - 260°C); low-k/Cu flip chip packages with Hi-Pb bumps, flux compatible. |
| Hysol FP4583 | Hysol FP4583 is a high purity, FC underfill, high lead applications |
| Hysol FP4585 | Capillary underfill |
| Hysol FP4651 | Hysol FP4651 is a low viscosity version of FP4650 for a large array of packages. |
| Hysol FP4652 | Hysol FP4652 is a fast cure, low stress version of FP4450 for a large array of packages. |
| Hysol FP4654 | Package level: MAP low stress encapsulant |
| HYSOL FP4655 | HYSOL FP4655 is a high performance encapsulant which can be used alone or as a cavity fill material, or in combination with FP4451 material as part of a dam and fill system. Its low viscosity and fine particle filler size make it ideal for devices with fine pitch wire spacing. |
| Hysol FP5000 | One part, high purity, laminate packages, non-conductive paste (NCP, CSP, SCSP, SIP) designed for thermal compression bonding process. |
| Hysol FP5001 | Hysol FP5001 is one part with excellent thermal cycling resistance, laminate packages (CSP, SCSP, SIP). Compatible with both constant and pulse heat tools. Recommended for gold / gold assembly joint. |
| Hysol FP5200 | Hysol FP5200 has excellent JEDEC MSL performance. Compatible with bump assembly. Recommended for gold / gold and gold / SAC alloy solder joint. |
| Hysol FP5201 | NCP for thermal compression bonding |
| Hysol FP5300 | Hysol FP5300 has excellent adhesion strength to 2- and 3-layer flex and Iaminates, as well as misc. assembly. Low temp cure ACP, RFID. |
| Hysol FP5500 | NCP for thermal compression bonding |
| Hysol FP6101 | Hysol FP6101 is a reworkable underfill for improvement of mechanical reliability. Fast flow and snap cure for improved process time. |
| Hysol FP6401 | Hysol FP6401 is a high purity, liquid flexible damming material. |
| Hysol GR15F-1 | Hysol GR15F-1 is a green anhydride cured molding compound that contains spherical filler and is designed for high voltage applications. This product has excellent moldability performance with high yield rates. |
| Hysol GR15F-1P | Molding compound |
| HYSOL GR15F-A | HYSOL GR15F-A anhydride cured molding compound is formulated to contain spherical fillers. |
| Hysol GR2220 | Hysol GR2220 is a black, non-halogenated conventional molding of leaded components. |
| Hysol GR2310 | Hysol GR2310 is a gold, non-halogenated molding powder, for tantalum and ceramic capacitors, leaded or surface-mounted sensors. |
| Hysol GR2310-Gold | Hysol GR2310 is a gold / non-halogenated molding powder, tantalum and ceramic capacitors, leaded or surface-mounted sensors. |
| Hysol GR2320 | Black/non-halogenated molding powder, tantalum and ceramic capacitors, leaded or surface-mounted sensors |
| HYSOL GR2340 | HYSOL GR2340 is a specially formulated molding compound designed for use in high volume molding of tantalum capacitors. |
| Hysol GR2620 | Molding compound |
| Hysol GR2710 | Hysol GR2710 is a gold, low stress/non-flame retarded molding powder, for tantalum and ceramic capacitors, leaded or surface-mounted sensors. |
| Hysol GR2720 | Molding compound |
| Hysol GR2725 | Molding compound |
| Hysol GR2811 | Hysol GR2811 epoxy molding compound delivers outstanding performance and ease of use. This material is designed to achieve JEDEC Level 1 requirements to 260°C reflow temperature. GR2811™ meets UL 94 V-0 Flammability at 6.35mm thickness. |
| Hysol GR2820 | Gold, ultra low stress, non-halogenated molding powder, tantalum and ceramic capacitors, leaded or surface-mounted sensors |
| Hysol GR360A | Hysol GR360A is a green, high-productivity molding compound designed for use in high voltage power applications requiring good electrical stability at high temperature. |
| Hysol GR360A-F8 | Epoxy molding compound |
| HYSOL GR360A-ST-1 | HYSOL GR360A-ST-1 is an environmentally friendly "green" molding compound containing no bromine, antimony or phosphorus flame retardant. It meets UL 94 V-0 flammability at 6.35 mm. |
| Hysol GR640HV | Hysol GR640HV is a low stress, green molding compound suitable for SOT packages. Hysol GR640HV provides superior moldability and reliability with lowest cost of ownership. |
| Hysol GR640HV-L1 | Molding compound |
| Hysol GR646 | Hysol GR646 is an epoxy molding compound for discretes and small signal and small outline transistors. It is only recommended for automatic molding operations. |
| Hysol GR725LS | Green molding compound designed for power SO and surface mount discrete packages (High Power Packages, Power SOIC, Power SSOP). |
| Hysol GR725LV | Hysol GR725LV is a green, semiconductor grade, low stress and high adhesion molding compound for High Power Packages, Power SOIC, Power SSOP applications. |
| Hysol GR750 | High thermal conductivity-isolated packages, green, designed to improve thermal management for semiconductor devices. |
| Hysol GR750-SC | Molding compound |
| Hysol GR750HT-25 | Hysol GR750HT-25 is a high thermal conductivity molding compound using fully alumina fillers designed to improve thermal management for semiconductor devices. |
| Hysol GR828 | Hysol® GR828™ is green, specifically designed for SO packages up to TSSOP/TQFP. Passes JEDEC Level 1 @ 260°C reflow. |
| Hysol GR828D | Ultra low stress, high adhesion molding compound |
| Hysol GR828DD | Hysol GR828DD is a green, semiconductor grade, low stress and high adhesion molding compound. It is especially designed for DPAK/D2PAK packages with Ni and copper/Ag plating lead frames. |
| HYSOL GR828FC1 | HYSOL GR828FC1 is an environmentally friendly "green" molding compound containing no bromine, antimony or phosphorus flame retardant. |
| Hysol GR838LC | Molding compound. Surface mount/leadframes (DPAK/D2PAK). |
| Hysol GR869 | Molding compound. Surface mount/leadframes (QFP, T/LQFP, TSOP, SOIC) |
| Hysol GR9810 Series | Hysol GR9810 series are technologically advanced epoxy molding compounds designed for use as an overmold on a wide variety of SIP, PBGA, CSP and BGA. |
| Hysol GR9810-1 | Technologically advanced epoxy molding compound designed for use as an overmold on a wide variety of laminate based molded array packages including SIP and flip-chip array packages that have been conventionally underfilled |
| Hysol GR9810-1P | Hysol GR9810-1P is a state-of-the-art epoxy molding compound developed to meet the stringent encapsulation requirements of package-on-package PoP, SCSP, and MMC devices. |
| Hysol GR9820-1 | Technologically advanced epoxy molding compound designed for use as an overmold on a wide variety of BGA and CSP. |
| Hysol GR9851 | Technologically advanced epoxy molding compound designed for use as an overmold on a wide variety of laminate based molded array packages |
| Hysol GR9851M | State-of-the-art epoxy molding compound developed to meet the encapsulation requirements of memory card (MMC) devices. |
| Hysol Huawei KL-G800lmp | A high adhesion, ultra low stress, green mold compound |
| Hysol Huawei KL-G900H | High adhesion, ultra low stress, green mold compound suitable for BGA and contains no bromine, antimony or phosphorus flame retardant. |
| Hysol Huawei KL1000-4T | Hysol Huawei KL1000-4T provides the lowest cost of ownership with superior moldability and reliability. Extremely suitable for DIP packages. |
| Hysol Huawei KLG750 | Hysol HuaweiKLG750 has superior adhesion technology to ensure zero delamination performance for SOT and SOIC packages. |
| HYSOL KL-1000-3LXP | HYSOL KL-1000-3LXP provides the lowest cost of ownership with superior moldability and reliability. Bridge Package, Axial Package and TO are typical package applications. |
| Hysol KL-2500-1K | Low thermal expansion and low stress molding compound suitable for GBU,KBU,TO,ZIP,SIP,DIP and SDIP packages, providing superior moldability and reliability. |
| HYSOL KL-3000-FF(H) Molding Compound | HYSOL KL-3000-FF(H) epoxy molding compound. |
| Hysol KL-4500-1 | Low stress and high reliability molding compound suitable for TO, SOIC ,SSOP and QFP packages, providing high purity and low uranium content. It’s low viscosity properties enables low wire sweep molding with a large operating window. |
| Hysol KL-4500-1N | Low stress and high reliability molding compound suitable for TO, SOP and SSOP packages. |
| Hysol KL-4500-1NT | Hysol KL-4500-1NT is a low stress and high reliability molding compound suitable for SOIC packages. |
| Hysol KL-5000-HT | Hysol KL-5000-HT has alumina fillers and delivers a high thermal conductive solution for TO-220F/3PF's thermal requirements. |
| Hysol KL-6500S | Hysol KL-6500S is a low stress molding compound suitable for SOT/SMX and SOD packages. |
| HYSOL KL-7000HA | HYSOL KL-7000HA is suitable for QFP, T/LQFP, TSOP packages. Provides ultra low stress, low moisture absorption, high purity and high reliability. |
| Hysol KL-G100 | Hysol KL-G100 is a green mold compound with 1/4" flammability rating suitable for bridge, axial and TO packages. |
| HYSOL KL-G100L molding compound | HYSOL KL-G100L Molding Compound |
| Hysol KL-G150 | Molding compound |
| Hysol KL-G200 | Hysol KL-G200 is a green mold compound with 1/4" flammability rating suitable for bridge, axial and TO packages. |
| Hysol KL-G200S | Molding compound. Surface mount/leadframes |
| Hysol KL-G450H | Low stress, green mold compound suitable for SOIC, SOP, SOJ and QFP; contains no bromine, antimony or phosphorus flame retardant. |
| Hysol KL-G450S | Molding compound. Surface mount/leadframes (SOT/SMX). |
| Hysol KL-G500HT | Through hole discretes/high thermal conductivity molding compound |
| Hysol KL-G730 | HYSOL KL-G730 epoxy molding compound delivers outstanding performance and ease of use. This material is designed to achieve JEDEC Level 1 requirements, at 260°C reflow temperature. Hysol KL-G730 offers enhanced reliability peformance for T/LQFP packages. KL-G730 meets UL 94 V-0 flammability at 3.175mm thickness. |
| Hysol KL-G800H | High adhesion, ultra low stress, green mold compound suitable for SOT/SMX, TSOP, D/D2PAK and L/TQFP and contains no bromine, antimony or phosphorus flame retardant. |
| HYSOL KL-G800H CD | HYSOL KL-G800H CD is a green epoxy molding compound suitable for thin leaded packages. It is designed to achieve JEDEC level 2. It is used in SOT and SMX applications. |
| Hysol KL-G900HC | Molding compound |
| Hysol KL-G900HP | Molding compound |
| Hysol KL1000-3LX | Hysol Huawei KL-1000-3LX provides the lowest cost of ownership with superior moldability and reliability. KL1000-3LX is extremely suitable for bridge, axial and TO packages. |
| HYSOL KL1000-4TX(NT) | KL1000-4TX(NT) epoxy molding compound delivers outstanding performance and ease of use. |
| Hysol KO1095 | Hysol KO1095 is an epoxy-based die attach paste. |
| HYSOL LA3032-78 | HYSOL LA3032-78 encapsulant is designed for high throughput assembly operations. |
| Hysol MA 557 | Epoxy core splice, 350°F/177°C service temperature |
| Hysol MA 562 | Epoxy core splice, 350°F/177°C service temperature |
| Hysol MA 562S | Epoxy core splice, 350°F/177°C service temperature |
| Hysol MA 562SFR | Epoxy core splice film, fire retardant, 350°F/177°C service temperature |
| Hysol MG15F | Anhydride-cured Molding Compound designed specifically for use in high voltage power applications requiring good electrical stability at high temperature. |
| Hysol MG15F-0140 | Hysol MG15F-0140 is a anhydride cured molding compound designed specifically for use in high voltage power applications requiring good electrical stability at high temperature. |
| Hysol MG15F-0140R | Hysol MG15F-0140R is a anhydride cured molding compound designed specifically for use in high voltage power applications requiring good electrical stability at high temperature. |
| Hysol MG15F-35A | Hysol MG15F-35A is a anhydride cured molding compound designed for use in high voltage power applications requiring good electrical stability at high temperatures. |
| Hysol MG15F-R | Hysol MG15F-R is a anhydride cured molding compound designed for use in high voltage power applications. |
| Hysol MG17-0604F | Hysol MG17-0604F is a white epoxy molding compound specifically formulated for use as an overmold for opto coupler devices. |
| Hysol MG21F-02 | Hysol MG21F-02 is an ECN base molding compound suitable for medium voltage. |
| Hysol MG33F | Electronic grade epoxy molding compound |
| Hysol MG35F | Hysol MG35F is suitable for discrete semiconductors requiring improvement in heat dissipation. Provides high productivity for power transistors. |
| Hysol MG40F-4023 | Hysol MG40FSBlack / conventional molding of SMD and SIP networks; gold version MG40F-0526 available |
| Hysol MG40FS | Hysol MG40FSBlack / conventional molding of SMD and SIP networks; gold version MG40F-0526 available |
| HYSOL MG40FS-AM | HYSOL MG40FS-AM epoxy molding compound delivers outstanding performance and ease of use. It is used in PDIP, SOIC and power discrete applications. |
| Hysol MG52F-08 | Hysol MG52F-08 is a high productivity, low stress, molding compound designed for high volume encapsulation of various surface mount devices. |
| HYSOL MG52F-99B NXP Molding Compound | HYSOL MG52F-99B NXP high productivity modling compound, designed for high volume encapsulation of surface mount devices. |
| Hysol OS1600 | Hysol OS1600 is a water white casting system suitable for use on visible and I.R. L.E.D. |
| Hysol OS2902 | Hysol OS2902 is a low stress, high performance L.E.D. casting system for discrete L.E.D.'s and displays. |
| Hysol OS4210 | Hysol OS4210 is a low viscosity, long pot life 2.3.5.2.11.4 system that cures at 85°C or above to yield clear water white castings. |
| Hysol OTO149-3 | Clear glob top material with good adhesion to any substrate. |
| Hysol PC12007M | Hysol PC12-007M is a 100% solids, general purpose, epoxy printed circuit coating developed to meet military requirements. |
| Hysol PC18M | Hysol PC18M is a flexible solvent-based, one-component urethane coating. Provides good thermal shock resistance. Meets the requirements of MIL-I-46058C. |
| Hysol PC20M | Hysol PC20M is a stable, clear material suitable for continuous operation up to 110°C. |
| Hysol PC28STD | Hysol PC28STD is a convenient aerosol packaging, oxygen-cure, urethane, printed circuit board coating system. |
| Hysol PC29 | Thin film printed circuit board coating with good toughness and high flexibility |
| Hysol PC29M | Hysol PC29M is a thin-film, urethane printed circuit board coating with good toughness and high flexibility. Note: Not sold in Europe. |
| Hysol PC30STD | Hysol PC30STD is a waterborne acrylic, one component coating recommended for printed board coating. |
| Hysol PC40-UM | Hysol PC40-UM is a solvent-free, low-viscosity, rapid gel, UV-moisture cure one component acrylate-based conformal coating. |
| HYSOL PC40-UMF | HYSOL PC40-UMF conformal coating is specifically formulated to rapidly gel and immobolise when exposed to UV light and then fully cure when exposed to atmospheric moisture, ensuring optimum performance even in shadowed areas. |
| Hysol PC40-UT | Hysol PC40-UT is a solvent-free, low-viscosity, rapid gel, UV-thermal cure one component conformal coating. |
| Hysol PC54 | Hysol PC54 is a rapid drying, one-component for acrylic non-atomized spray coating applications. Provides excellent vibration resistance and toughness. Can be removed for repair. |
| Hysol PC62 | Acrylic conformal coating |
| Hysol PL 460 | Epoxy foaming paste, expanding, 350°F/177°C service temperature |
| Hysol PL 639 | Nitirile phenolic film adhesive, 350°F/177°C service temperature |
| Hysol PL 685 | Epoxy core splice film, expanding, 350°F/177°C service temperature |
| Hysol PL 696 | Epoxy-based structural film adhesive designed primarily for out-of-autoclave curing process applications requiring low cure temperatures as well as low curing pressures. |
| Hysol PL 7000 | Composite bond film adhesive, 300°F/149°C service temperature |
| Hysol PL 737 | Film adhesive, 350°F/177°C service, non-metallic filled |
| Hysol PL 777 | Film adhesive, 300°F/149°C service, non-metallic filled |
| Hysol PL 777-1FR | Film adhesive, fire retardant, 300°F/149°C service, non-metallic filled |
| Hysol PL 780-1 | Film adhesive, high temperature 350°F/177°C service temperature, non-metallic filled |
| Hysol PL 795 | Film adhesive, composite bonding, 300°F/149°C service temperature |
| Hysol PL 795-1 | Film adhesive, composite bonding, 300°F/149°C service temperature |
| Hysol PL 795-1SF | Composite surfacing film, epoxy |
| Hysol PL 795SF | Composite surfacing film, epoxy |
| Hysol QMI 2569 | Hysol QMI 2569 is a no-dry Ag/glass die attach for glass, solder and seamed sealed packages. Very high thermal conductivity applications for die as large as 0.80 in 2. |
| Hysol QMI 301 | Hysol QMI 301 is a silver filled, conductive cyanate ester adhesive for attachment specifically designed for high throughput attachment of integrated circuits to cofired ceramic packages. |
| Hysol QMI 3555R | Hysol QMI 3555R is a no-dry Ag/glass die attach for glass, solder and seamed sealed packages. |
| Hysol QMI 536UV | Hysol QMI 536UV is used for component or die attach where very high electrical and thermal conductivity is required. Suitable for high heat dissipation devices and solder replacement applications. |
| Hysol QMI5030 | Unique liquid / paste heat cure die attach adhesive product resulting from blend of thermoset and thermoplastic resins. |
| Hysol QMI505MT | Hysol QMI505MT is a lower stress BMI based paste for preplated, alloy 42 and black oxide finishes. |
| Hysol QMI506 | Hysol QMI506 is a low stress conductive die attach paste for QFP's and TSOP's. |
| Hysol QMI516 | Hysol QMI516 is a conductive paste for PBGA and SBGA packages. |
| HYSOL QMI516IE | HYSOL QMI516IE electrically conductive hydrophobic adhesive is designed for die attach applications. |
| Hysol QMI516LC | Hysol QMI516LC is a low temperature cure, general conductive, silver-filled paste adhesive. |
| Hysol QMI518 | Hysol QMI518 is a very low stress conductive die attach adhesive. |
| Hysol QMI519 | QMI519 is a silver filled conductive adhesive for attachment of integrated circuits and components to metal leadframes advanced substrates. |
| Hysol QMI5200 (Film) | Hysol QMI5200 (Film) is a non-conductive 2-in-1 dicing die attach film. |
| HYSOL QMI5200-1X adhesive film | HYSOL QMI5200-1X adhesive film |
| Hysol QMI529HT | General conductive, die attach adhesive |
| Hysol QMI529HT-5DLT | Hysol QMI529HT-5DLT is used for component or die attach where very high electrical and thermal conductivity are required. |
| Hysol QMI529HT-LV | Die attach adhesive |
| Hysol QMI536HT | Hysol QMI536HT is a high thermal version of QMI536 and is ideal for mixed stacked die applications. Non-die damaging heat cure, die attach filler. |
| Hysol QMI536NB | Hysol QMI536NB has high JEDEC performance for first die and die-to-die bonding. Non-conductive and non-damaging to the die face. Can be cured as low as 80°c. No bleed. |
| Hysol QMI536NB-1A3 | High JEDEC performance for first die and die-to-die bonding. Non-conductive and non-damaging to the die face. Can be cured as low as 80°c. No bleed. |
| Hysol QMI536NB-1A5 | Hysol QMI536NB-1A5 is a non-conductive die attach paste. |
| Hysol QMI538NB | Non-conductive paste for leadframe applications. |
| Hysol QMI538NB-1A2 | Non-conductive paste for leadframe applications. Very low stress QMI538NB°1A2, 1A3, 1A4 for die sizes greater than 500 x 500 mil. / 13 x 13 mm. |
| Hysol QMI546 | Hysol QMI546 is smooth flowing and easy to use paste for the first die as well as die stacking. |
| Hysol QMI547 | Hysol QMI547 is a non-conductive paste for leadframe applications. |
| Hysol QMI718 | Hysol QMI718 is designed to deliver exceptional JEDEC performance in SOIC packages using copper finished leadframes. |
| Hysol SB-50 | Innovative high mechanical reliability and reworkable edgebond, thermal cure material designed for CSP and BGA devices. |
| Hysol STYCAST 1090BLK | Stycast 1090BLK is a room temperature cure epoxy designed for encapsulation and potting of electronic assemblies that require lower weight such as aerospace applications. |
| Hysol STYCAST 1090SI | Stycast 1090SI is a room temperature cure lightweight syntactic encapsulant that is recommended for applications where high compressive stress is applied to encapsulated circuitry - as in deep ocean work.. |
| Hysol STYCAST 2017M4 | Epoxy heat cure encapsulant developed for lamp type, blue LED. |
| Hysol STYCAST 2561/CAT 11 | Encapsulant-potting |
| Hysol STYCAST 2651 | Two component, low viscosity, general purpose epoxy encapsulant. |
| HYSOL STYCAST 2651-40 | HYSOL STYCAST 2651-40 is a filled, general purpose, dielectric grade epoxy encapsulant. It is a lower viscosity version of STYCAST 2651. It has excellent adhesion to a wide variety of substrates and excellent electrical properties. It can cured with CATALYST 11, CATALYST 9 and CATALYST 23 LV. |
| HYSOL STYCAST 2651-40FR/Catalyst 11 | HYSOL STYCAST 2651-40FR/Catalyst 11 epoxy encapsulant is designed for general potting applications. |
| HYSOL STYCAST 2651-40FR/Catalyst 24LV | HYSOL STYCAST 2651-40FR Catalyst 24LV encapsulant is designed for general potting applications. |
| HYSOL STYCAST 2651-40FR/Catalyst 9 | HYSOL STYCAST 2651-40FR /Catalyst 9 epoxy encapsulant designed for general potting applications. |
| HYSOL STYCAST 2651MM | HYSOL STYCAST 2651MM is designed as a general purpose encapsulant which requires low viscosity and low abrasion. It is especially useful for machine dispensing and for parts that require post molding machining. |
| HYSOL STYCAST 2651MM/CATALYST 23LV | HYSOL STYCAST 2651MM CATALYST 23LV is a general purpose encapsulant designed for machine dispensing and for parts requiring post molding machining. |
| HYSOL STYCAST 2651MM/CATALYST 9 | HYSOL STYCAST 2651MM Catalyst 9 is a general purpose encapsulant designed for machine dispensing and for parts requiring post molding machining. |
| HYSOL STYCAST 2762 Catalyst 17M-1 | HYSOL STYCAST 2762 Catalyst 17M-1 two component epoxy encapsulant designed for electronic components exposed to harsh environments. |
| HYSOL STYCAST 2762-Catalyst 14 | HYSOL STYCAST 2762 Catalyst 14 encapsulant |
| Hysol STYCAST 2850FT | For high thermal conductivity and low outgassing, consider this encapsulant. |
| Hysol STYCAST 2850FT/CAT 11 | Heat cure encapsulant-potting. |
| Hysol STYCAST 2850FT/CAT 23LV | Room temperature cure encapsulant-potting |
| HYSOL STYCAST 2850KT/CATALYST 24LV | HYSOL STYCAST 2850KT CATALYST 24LV is a thermally conductive, electrically insulatiive epoxy encapsulant designed for heat sink replacement in non-integrated electrical components and assemblies. it is also recommended for use in high voltage applications where surface arcing or tracking is a concern. |
| HYSOL STYCAST 2850KT/CATALYST 9 | HYSOL STYCAST 2850KT with CATALYST 9 epoxy encapsulant is designed for heat sink replacement in non-integrated electrical components and assemblies. |
| HYSOL STYCAST 2850MT-Catalyst 24LV | HYSOL STYCAST 2850MT-Catalyst 24LV is a two component, electrically insulating general purpose encapsulant. It |
| HYSOL STYCAST 2850MT-Catalyst 27-1 | HYSOL STYCAST 2850MT-Catalyst 27-1 is a two component, electrically insulating general purpose encapsulant. |
| HYSOL STYCAST 2850MT-Catalyst 9 | HYSOL STYCAST 2850MT-Catalyst 9 is recommended for encapsulation of components that require heat dissipation and thermal shock properties. |
| HYSOL STYCAST 3050 Catalyst 11 | HYSOL STYCAST 3050 Catalyst 11 is designed for potting and encapsulation applications. |
| HYSOL STYCAST 3050-Catalyst 9 | HYSOL STYCAST 3050 Catalyst 9 is desgined for potting and encapsulation applications with very small physical spacing between parts. |
| Hysol STYCAST 50500-1 | For protection of wire-bonded ICS, consider this flowable material for fills. |
| Hysol STYCAST 50500D | For protection of wire bonds consider this high purity material as either a dam or a glob top. |
| Hysol STYCAST A312 | A one-component, reworkable unfilled solventless epoxy paste adhesive / underfill encapsulant; fast curing and excellent chemical and heat resistance. |
| HYSOL STYCAST A316 Series | HYSOL STYCAST A316 series epoxy adhesive and sealant is designed for high throughput assembly operations. |
| HYSOL STYCAST E1070 | HYSOL STYCAST E1070 epoxy encapsulant |
| Hysol STYCAST E1847 | Encapsulant-potting |
| Hysol STYCAST E2534FR | Stycast E2534FR/Catalyst 9 is a heat cure epoxy potting compound that complies with recent demands on environmentally friendly products and does not contain brominated flame retardants. |
| HYSOL STYCAST EFF15 syntactic foam powder | HYSOL STYCAST EFF15 epoxy based free flowing syntactic foam powder. |
| Hysol STYCAST NX-17 | Stycast NX-17 is a two-component, heat cure, epoxy encapsulant with good adhesion to PPA. |
| Hysol STYCAST NX-76 | One-component epoxy encapsulant designed for SMD LED. Low CTE and good light dispersion by adding a small amount of filler. |
| Hysol STYCAST TC4 | Thermally conductive, high temperature silicone thermal grease. |
| Hysol STYCAST TC8M | Thermally conductive, high temperature silicone thermal grease. |
| Hysol STYCAST U2500 | Encapsulant |
| HYSOL STYCAST U2535 Polyurethane Encapsulant | HYSOL STYCAST U2535 flexible polyurethane encapsulant. |
| Hysol SynCore 9823.1 | Syntactic epoxy film, prepreg substitution ply, 250°F/121°C service temperature. |
| Hysol SynCore 9872.1 | Syntactic epoxy film, prepreg substitution ply, 350°F/177°C service temperature |
| Hysol SynCore HC 9875 | High crush strength, low density syntactic core material, co-curable with a variety of 350°F / 177°C curing epoxy prepregs. |
| Hysol SynSkin HC 9837.1 | Composite surfacing film, epoxy-based, filled |
| Hysol SynSpand 9899 | Epoxy expanding syntactic film for low density applications |
| Hysol SynSpand 9899CF | Epoxy expanding syntactic film for core fill and edge close out |
| Hysol SynSpand EA 9835 | An expanding syntactic film, which cures at 300°F / 149°C, used for jet engine abradable fan seals. |
| Hysol SynSpand EA 9840 | Expanding syntactic film, cures at 300°F / 149°C, used for jet engine abradable fan seals. |
| Hysol SynSpand EA 9890 | Epoxy expanding film for jet engine abradable seal |
| Hysol TF 3056FR | Low density syntactic epoxy paste, core fill |
| HYSOL TRA-BOND 2106 | HYSOL TRA-BOND 2106 two component epoxy is designed for high strength structural bonding applications. |
| HYSOL TRA-BOND 2106T | HYSOL TRA-BOND 2106T is a two component epoxy designed for high strength structural bonding applications. |
| Hysol TRA-BOND 2115 | Tra-Bond 2115 is an excellent choice for bonding optical where alignment accuracy is essential. |
| HYSOL TRA-BOND 2116 | HYSOL TRA-BOND 2116 is a thixotropic, low vapor pressure, room temperature cure, epoxy paste system that passes the NASA Outgassing Specification. |
| Hysol TRA-BOND 2151 | Thixotropic two part, room temperature cure, paste adhesive. |
| HYSOL TRA-BOND 2158 | HYSOL TRA-BOND 2158 is a two part adhesvie that develops strong, durable high impact bonds at room temperature which improve heat transfer while maintaining electrical insulation. |
| Hysol TRA-BOND F112 | This two-part, low viscosity epoxy paste adhesive is designed for use on fiber optic assembly applications. |
| Hysol TRA-BOND F113SC | Optically clear, room temperature cure, low viscosity adhesive |
| Hysol TRA-BOND F114 | Optically clear, low viscosity, room temperature cure, epoxy adhesive. |
| Hysol TRA-BOND F123 | Heat cure epoxy |
| Hysol TRA-BOND F253 | Tra-Bond F253 is a two-part epoxy formulated to change color during the cure process to indicate the cure status. |
| Hysol TRA-BOND FDA16 | A medium viscosity, room temperature cure, epoxy resin paste system specifically designed for medical device applications. |
| Hysol TRA-BOND FDA2 | A room temperature cure, thixotropic epoxy adhesive designed for medical device applications. |
| Hysol TRA-BOND FDA2T | A room temperature cure, thixotropic epoxy resin paste system specifically designed for medical device applications. |
| Hysol Tra-Cast FS245 | Tra-Cast FS245 is a thixotropic, two-part adhesive used on staking transistors, diodes, resistors and printed circuit electronics applications. |
| Hysol TRA-DUCT 2902 | Tra-Duct 2902 is designed for electronic bonding and sealing applications that require a combination of good mechanical and electrical properties. |
| Hysol TRA-DUCT 2958 | Two part epoxy |
| HYSOL UF3037 | HYSOL UF3037 reworkable epoxy underfill is designed for CSP and BGA applications. It cures quickly at low temperatures to minimize stress to other components, and when cured provides excellent mechanical stress protection for solder joints. |
| Hysol UF3537 | Hysol UF3537 is a fast cure underfill used on chip scale packaging. |
| Hysol UF3800 reworkable underfill | HYSOL UF3800 is a high reliability reworkable underfill designed for CSP and BGA applications. |
| HYSOL UF3810 | HYSOL UF3810 reworkable epoxy underfill is designed for CSP and BGA applications. |
| Hysol UF8830 | Hysol UF8830 is a liquid epoxy underfill for flip chip BGA. |
| Hysol US 5501 | Hysol US5501 (formerly Loctite® 821200R & C) is a 100% solids, mineral filled, urethane adhesive that is very low in volatile components and is flame retardant. |
| Hysol US0146 | Hysol US0146 is an unfilled, two component clear amber polyurethane casting system formulated for potting. |
| Hysol US0154 | Encapsulant potting urethane. |
| HYSOL US1150 | HYSOL US1150 is an extended polybutadiene/MDI base, mineral filled, medium hardness, ambient cure urethane encapsulant/sealant. This material can be used for potting electronics or devices for protection against environmental hazards. |
| HYSOL US1151 | HYSOL US1151 is a low viscosity, reenterable potting and encapsulation compound. It has excellent low temperature properties. Introduction of this material on a bed of 8-12 mesh sand increases thermal conductivity while decreasing shrinkage and cost. HYSOL® US1151™ can be used to encapsulate electronics for various applications including under-the-hood automotive and marine. The low glass transition temperature means that sensitive compounds are not damaged during low temperature excursions. |
| Hysol US1152 | Hysol US1152 is an unfilled, low viscosity, flexible, soft, ambient and/or oven curable urethane encapsulant. |
| HYSOL US1750 | HYSOL US1750 elastomeric polyurethane, is a waterwhite, clear, medical grade, fast gel potting material. It is ideal for blood heat exchanger, dialyzer and oxygenerator units. |
| Hysol US2050 | Hysol US2050 is a quick set, optically clear polyurethane compound that exhibits excellent ultraviolet resistance. |
| Hysol US2350 | Hysol US2350 is a flexible, flame retardant, mineral filled, polyurethane compound. |
| Hysol US2650 | Hysol US2650 is an inexpensive, low viscosity, flexible, flame retardant castor oil/MDI based urethane potting compound. |
| Hysol US2651 | Hysol US2651 is an unfilled, low viscosity, re-enterable potting and encapsulation compound. |
| Hysol US2652 | Hysol US2652 is a 100% solid, mineral filled urethane adhesive that is very low in volatile components. |
| Hysol US5511 | Hysol US5511 is a flexible, flame retardant, mineral filled castor oil/MDI based polyurethane compound. |
| Hysol US5529 | Hysol US5529 is a flexible, flame retardant, mineral filled polyurethane compound. |
| Hysol US5532 | Encapsulant potting urethane. |
| Hysol US5538 | Hysol US5538 is a flexible, unfilled, potting compound. This system provides low viscosity for good flow and good adhesion to many substrates. |
| Hysol US5544 | Hysol US5544 is a fast gelling, flexible, flame-retardant, mineral-filled polyurethane compound. |
| HYSOL UV3000 | HYSOL UV3000 is a UV curable adhesive designed for high throughput assembly operations. This adhesive can withstand exposure to temperatures as high as 200°C. |
| HYSOL UV3000LH | HYSOL UV3000LH UV cure adhesive is designed for high throughput assembly operations. A low halide version of UV3000. It is used in CMOS glass bonding. |
| HYSOL UV3001 | HYSOL UV3001 is a UV cure adhesive designed for high throughput assembly operations. It can withstand exposure to temperatures as high as 200°C. It is the 4 μm glass rod spacer version of UV3000 adhesive. |
| Hysol UV8800M | Encapsulant-fill material |
| Hysol UV9060 | Hysol UV9060 is a no-flow UV moisture cure encapsulant. |
| Hysol XA80215-1 | Hysol XA80215-1 is a one component, non-conductive photocurable adhesive designed for high throughput assembly operations. This material is suitable for use with temperature sensitive substrates and components. |
| HYSOL XCE3104XL | HYSOL XCE3104XL is an electrically conductive adhesive with tin compatibility for the stencil and screen print applications. |
| HYSOL XCE3120 | HYSOL XCE3120 anisotropic epoxy adhesive is designed for high throughput microelectronics assembly applications. |
| HYSOL XCP3302NS | HYSOL XCP3302NS gold filled, electrically conductive adhesive is designed for automatic dispensing operations. It is the no spacer version of XCP3302 adhesive. |
| Hysol XE1218 | Reworkable, snap cure, void-free, fast flowing underfill that also provides excellent adhesion and reliability benefits. |
| HYSOL XE80100 | HYSOL XE80100 is a solventless modified epoxy adhesive that combines low stress with good adhesion on nearly all surfaces and is flexible for mismatched CTE applications. XE80100 is the non-conductive verison of ECCOBOND CE8500 adhesive. |
| HYSOL XUV 9086 | HYSOL XUV9086 is a one component UV cure encapsulant used in ink jet applications. |
| Hysol XUV-9052 | Hysol XUV-9052 is a one component, dual cure (UV & moisture) general adhesive designed as a lead encapsulant. |
| HYSOL XUV80260 | HYSOL XUV80260 is a UV curable display perimeter sealant for rigid type OLED. |
| HYSOL XUV80270-1 | HYSOL XUV80270-1 is a one-component, non-conductive, UV curable adhesive sealant for high throughput display assembly that require protection against humidity. It is formulated to cure very fast when exposed to UV light, allowing for fast processing of a thin section of material even through ITO coated glass. |
| ICP-4000 | ABLESTIK ICP-4000 is a silicone based, electronically conductive adhesive recommended in mounting small components to a variety of interconnect substrates. |
| Krytox RFE Advanced PTFE Dry Lubricant | High performance, synthetic, long-lasting |
| Krytox RFE PFPE High Performance Lubricant | Synthetic, long-lasting lubrication |
| Krytox RFE PFPE Lubricant | Excellent lubrication properties over a broad temperature range |
| Liofol Tycel 393 | One component solvent based laminating adhesive for standard applications. |
| Liofol Tycel 7668/7276 | Two component solventless adhesive for medium to high performance. |
| Liofol Tycel 7900/7283 | Two component solvent based high performance adhesive. |
| Liofol Tycel 7910 | One component solventless adhesives for paper lamination. |
| Liofol Tycel 7966/7287 | Two component solvent based adhesive for medium to high performance applications. |
| Liofol Tycel 7975/7276 | Two component solventless adhesive for low to medium performance applications. |
| Liofol Tycel 7991/6093 | Two component aliphatic solventless adhesive for retort applications. |
| Liofol UR 2780 / UR 5891 | Two component aliphatic solvent based retort laminating adhesive. |
| Liofol UR2790-22 | Laminating adhesive. |
| Liofol UR6020 | Curative for LA7724-21. |
| LOCTIITE HYSOL GR 735 molding compound | LOCTITE HYSOL GR 735 thermally conductive molding compound |
| Loctite 565 (Automotive Aftermarket Only) | Controlled strength thread sealant for tapered & straight fittings. |
| Loctite 0151 Hysol Epoxy Adhesive | General purpose, ultra clear epoxy paste and multiple surface structural adhesive |
| Loctite 0232 Hysol Hot Melt Adhesive | Medium setting, hot melt adhesive |
| Loctite 0430 Hysol SprayPac Polyshot Hot Melt Adhesive | Bonding expanded polystyrene, polyethelene, and urethane foams |
| Loctite 0437 Hysol SprayPac Polyshot Hot Melt Adhesive | Formulated for spray application |
| Loctite 0450 Hysol SprayPac Polyshot Hot Melt Adhesive | Formulated for spray applications |
| Loctite 11C Hysol Epoxy Adhesive | General purpose epoxy, bonds and seals, machinable |
| Loctite 193124 R 5GA | Provides structural strength and flexible potting characteristic |
| Loctite 1942 Hysol Hot Melt Adhesive | Medium setting, general purpose hot melt adhesive |
| Loctite 1C Hysol Epoxy Adhesive | High temperature and chemical resistant, gap filling high viscosity epoxy paste and multiple surface structural adhesive |
| Loctite 1C-LV Hysol Epoxy Adhesive | High temperature and chemical resistant, gap filling, impact resistant, medium viscosity |
| Loctite 1X Hysol Hot Melt Adhesive | Medium to fast setting, hot melt adhesive |
| Loctite 200 Dri-Loc Threadlocker | High strength, preapplied threadlocker |
| Loctite 201 Dri-Loc Threadlocker | High strength preapplied threadlocker with temperature performance up to 400ºF. |
| Loctite 202 Dri-Loc Threadlocker | Medium strength, preapplied threadlocker and sealant. |
| Loctite 2020 Brass-Loc Threadlocker | Low to medium strength, preapplied threadlocker designed for brass. |
| Loctite 203 Dri-Loc Threadlocker | Low strength, preapplied threadlocker designed for fasteners with phosphate and oil coatings. |
| Loctite 2033 Blue-Green Threadlocker Gel | Medium strength threadlocker gel, no run formula. |
| Loctite 204 Dri-Loc Threadlocker | High strength, preapplied threadlocker designed for fasteners with plated surfaces. |
| Loctite 2045 Dri-Loc Threadlocker | High strength, preapplied threadlocker designed for plated fasteners and with temperature performance up to 400ºF. |
| Loctite 2046 Food Compliant Primerless Medium Strength Blue Threadlocker | The only threadlocker compliant with FDA food additive regulations developed specifically for the Food and Beverage industries. Disassemble with hand tools. |
| Loctite 2047 High Lubricity, Large Bolt High Strength Black Threadlocker | For fasteners over 7/8" in diameter. High lubricity allows proper clamp load to be achieved. Heat required to remove. |
| Loctite 205 Dri-Loc Threadlocker | High strength, preapplied threadlocker with high lubricity. |
| Loctite 2060 UV Dri-Loc Threadlocker | Medium to high strength, preapplied threadlocker with own microcaps. |
| Loctite 220 Wicking Grade MIL-SPEC Medium Strength Blue Threadlocker | MIL-SPEC Medium strength, removable, wicking grade threadlocker for small fasteners under ¼”. |
| Loctite 222 Low Strength Purple Threadlocker | Low strength removable purple threadlocker for small fasteners under ¼”. |
| Loctite 222MS Mil Spec Low Strength Purple Threadlocker | TOP PICK Mil Spec Low strength removable purple threadlocker for small fasteners under ¼”. |
| Loctite 232 Retaining Compound | Medium strength retaining compound for heavy interferences and high torque |
| Loctite 2400 NA Enhanced Health & Safety Medium Strength Blue Threadlocker | Medium strength blue theadlocker formulated to enhance health and safety. |
| Loctite 242 Mil Spec Medium Strength Blue Threadlocker | General purpose MIL-SPEC medium strength blue threadlocker for ¼” to ¾” bolts. Disassemble with hand tools. |
| Loctite 2422 Ultra High Temperature, Medium Strength Blue Threadlocker | Up to 650ºF, medium strength threadlocker. For ½” to ¾” bolts. Disassemble with hand tools. |
| Loctite 243 Primerless, Oil Tolerant, Removable Medium Strength Blue Threadlocker | TOP PICK Primerless, Oil Tolerant, surface insensitive medium strength blue threadlocker designed for the locking and sealing of threaded fasteners between 1/4" and 3/4" (6 to 20 mm). Disassemble with hand tools. |
| Loctite 2432 Low Halogen, Low Sulfur Medium Strength Blue Threadlocker | Medium strength low halogen, low sulfur threadlocker for use in nuclear facilities. Disassemble with hand tools. |
| Loctite 246 High Temperature, Medium Strength Blue Threadlocker | Up to 450°F, Medium strength, surface insensitive threadlocker for heavy duty applications. Disassemble with hand tools. |
| Loctite 248 Semi Solid Stick Medium Strength Blue Threadlocker | TOP PICK Medium strength blue threadlocker in stick form. Perfect for overhead and tough to reach applications. Disassemble with hand tools. |
| Loctite 25062 Anaerobic Activator | Activator for anaerobics |
| Loctite 262 Mil Spec High Strength Red Threadlocker | High strength mil-spec threadlocker for bolts up to ¾”. Heat required to remove. |
| Loctite 2620 Ultra High Temperature, High Strength Red Threadlocker | Up to 650* F High temperature, high strength threadlocker. Heat required to remove. |
| Loctite 263 Primerless, Oil Tolerant High Strength Red Threadlocker | TOP PICK Primerless, Oil Tolerant, surface insensitive high strength red threadlocker for the permanent locking and sealing of threaded fasteners. Heat required to remove. |
| Loctite 266 High Temperature, High Strength Red-Orange Threadlocker | High strength, surface insensitive, high temperature threadlocker. |
| Loctite 268 Semi Solid Stick High Strength Red Threadlocker | TOP PICK High Strength red threadlocker in stick form. Perfect for overhead and tough to reach applications. Heat required to remove. |
| Loctite 2700 NA Enhanced Health & Safety High Strength Red Threadlocker | High strength red threadlocker formulated to enhance health and safety. |
| Loctite 271 Mil Spec Low Viscosity High Strength, Red Threadlocker | High strength, low viscosity threadlocker for fasteners up to 1” diameter. Heat required to remove. |
| Loctite 272 High Temperature, High Strength Red Threadlocker | Up to 450°F high temperature, high strength, fast curing threadlocker. Heat required to remove. |
| Loctite 2760 High Strength, Primerless Red Threadlocker | High strength, fast curing, surface insensitive red threadlocker. |
| Loctite 277 Large Bolt High Strength Red Threadlocker | High strength red threadlocker for large bolts > 7/8”. Heat required to remove. |
| Loctite 290 Wicking Grade MIL-SPEC Medium-High Strength Green Threadlocker | TOP PICK MIL-SPEC Medium to high strength, wicking grade threadlocker for pre-assembled parts. |
| Loctite 294 High Strength, High Temperature, Green Threadlocker | Medium - high strength, high temperature, wicking grade threadlocker for pre-assembled parts. |
| Loctite 3032 Structural Adhesive, Polyolefin Bonder | General purpose, two-part acrylic adhesive, designed to bond untreated low energy substrates without any surface preparation |
| Loctite 3034 Structural Adhesive, Polyolefin Bonder | An acrylic, general purpose structural adhesive, designed to bond untreated low energy substrates such as polypropylene |
| Loctite 3035 Polyolefin Bonder | Works where traditional low surface energy bonders often fail, and eliminates the need for primers or surface treatments. Fast fixture time. |
| Loctite 3038 Structural Adhesive | Adhesive designed to bond e-coated metals to glass fiber filled polypropylenes. |
| Loctite 3050 Structural Adhesive | A weld-through capable, high temperature, acid resistant, two component acrylic adhesive designed for weld / rivet reduction. |
| Loctite 3051 Light Cure Medical Device Adhesive | Loctite 3051 is designed for bonding cannulae into hubs, syringes and lancets. |
| Loctite 3060 Structural Adhesive | Two-component, acid-free, toughened external-mix, two-step acrylic requires no static mixing or activators. Turns green when mixed. Excellent high temperature resistance. |
| Loctite 3092 Instant Adhesive | Fast curing cyanoacrylate adhesive for bonding a variety of plastics, rubber and porous materials. |
| Loctite 3100 Light Cure Adhesive | Acrylic, low modulus, high viscosity, UV/V light cure adhesive. |
| Loctite 3101 Light Cure Adhesive | Acrylic, low modulus, high viscosity, UV/V light cure adhesive. |
| Loctite 3103 Light Cure Adhesive | Thixotropic, flexible, acrylic, low modulus, medium viscosity, UV/V light cure adhesive. |
| Loctite 3104 Light Cure Adhesive | Acrylic, high strength, low viscosity, UV/V light cure adhesive. |
| Loctite 3105 Light Cure Adhesive | An acrylic, high strength, low viscosity, UV/V light cure adhesive. |
| Loctite 3106 Light Cure Adhesive | An acrylic, high strength, medium viscosity, thixotropic UV/V light cure adhesive. |
| Loctite 3107 Light Cure Adhesive | Acrylic, low viscosity, fluorescing, UV/V light cure adhesive. |
| Loctite 3108 Light Cure Adhesive | Acrylic, low durometer, rubbery, UV cure adhesive. |
| Loctite 3118 | Loctite 3118 is a white image sensor adhesive. |
| Loctite 3119 | Loctite 3119™ cures rapidly at relatively low temperature and provides excellent adhesion on a wide range of substrates. |
| Loctite 312 Speedbonder Structural Adhesive | Two-step acrylic, no-mix, ultra fast fixturing, low viscosity adhesive |
| Loctite 3128 | Loctite 3128 is an edgebond, thermal cure, black image sensor adhesive. |
| LOCTITE 3128NH edgebond underfill | LOCTITE 3128NH edgebond underfill |
| Loctite 3129 | Loctite 3129 is an image sensor adhesive. |
| Loctite 3131 | Photonics material |
| Loctite 3140 Hysol Epoxy Resin, General Purpose | Epoxy resin, part of a two part system to be used with a hardener, formulated for general purpose potting and encapsulating |
| Loctite 3141 Hysol Epoxy Resin, High Temperature | Epoxy resin, part of a two part system to be used with a hardener, formulated for high temperature potting and encapsulating |
| Loctite 3142 Hysol Epoxy Resin, Thermally Conductive | Epoxy resin, part of a two part system to be used with a hardener, formulated for thermally conductive potting and encapsulating |
| Loctite 3145 Hysol Epoxy Resin, Flame Retardant | Epoxy resin, part of a two part system to be used with a hardener, formulated for flame retardant potting and encapsulating |
| Loctite 315 Output | Loctite 315 is a self-shimming for electrical isolation; room temperature cure adhesive. |
| Loctite 3160 Hysol Epoxy Hardener, Glossy Surface Finish | Epoxy hardener, part of a two part system to be used with a resin, formulated for glossy surface finish potting and encapsulating |
| Loctite 3162 Hysol Epoxy Hardener, Fast Cure | Epoxy hardener, part of a two part system to be used with a resin, formulated for fast cure potting and encapsulating |
| Loctite 3163 Hysol Epoxy Hardener, Excellent Adhesion | Epoxy hardener, part of a two part system to be used with a resin, formulated for fast cure potting and encapsulating |
| Loctite 3164 Hysol Epoxy Hardener, General Purpose | Epoxy hardener, part of a two part system to be used with a resin, formulated for general purpose potting and encapsulating |
| Loctite 3165 Hysol Epoxy Hardener, Low Shrinkage | Epoxy hardener, part of a two part system to be used with a resin, formulated for low shrinkage potting and encapsulating |
| Loctite 3173 Hysol Polyurethane Resin, General Purpose | Polyurethane resin, part of a two part system to be used with a hardener, formulated for general purpose potting and encapsulating |
| Loctite 3182 Hysol Polyurethane Hardener, Fast Cure | Polyurethane hardener, part of a two part system to be used with a resin, formulated for gast curing potting and encapsulating |
| Loctite 3183 Hysol Polyurethane Hardener, General Purpose | Polyurethane hardener, part of a two part system to be used with a resin, formulated for general purpose potting and encapsulating |
| Loctite 3184 Hysol Polyurethane Hardener, Flame Retardant | Polyurethane hardener, part of a two part system to be used with a resin, formulated for flame retardant potting and encapsulating |
| Loctite 3192 | Loctite® Liquid Optically Clear Adhesives (LOCAs) acrylic |
| Loctite 3193 | Loctite® Liquid Optically Clear Adhesives (LOCAs) acrylic |
| Loctite 3195 | Loctite® Liquid Optically Clear Adhesives (LOCAs) acrylic |
| Loctite 3195DM | Loctite® Liquid Optically Clear Adhesives (LOCAs) (with chemistry) acrylic |
| Loctite 3196 | Loctite® Liquid Optically Clear Adhesives (LOCAs) (with chemistry) acrylic |
| Loctite 3201 Light Cure Adhesive | High viscosity, flexible, UV/V, light cure adhesive. |
| Loctite 3211 Light Cure Adhesive | Thixotropic, flexible, UV/V, light cure adhesive. |
| Loctite 3217 | Photonics material |
| Loctite 3220 | Photonics material-thermal cure |
| LOCTITE 3220WH | LOCTITE 3220WH is a one component designed for use in heat sensitive optoelectronic components and other microelectronic devices. This material offers excellent light reflection characteristics. 3220WH is the white colored version of Loctite 3220 adhesive. |
| Loctite 324 Speedbonder Structural Adhesive, High Impact | Two-step acrylic, no-mix, high impact, solvent resistant, gap filling, multiple surface structural adhesive |
| Loctite 325 Speedbonder Structural Adhesive, High Temperature | Two-step acrylic, no-mix, high temperature, solvent resistant, gap filling adhesive |
| Loctite 326 Speedbonder Structural Adhesive, Fast Fixture | Two-step acrylic, no-mix, fast fixturing, general purpose, solvent resistant, multiple surface structural adhesive |
| Loctite 3261 | Low tin, anaerobic structural adhesive |
| Loctite 330 Depend Structural Adhesive | Two-step acrylic, no-mix, general purpose, high viscosity, multiple surface structural adhesive |
| Loctite 3301 Light Cure Adhesive, Plastic/Metal | Low viscosity, slightly flexible, UV/V light cure adhesive. |
| Loctite 331 Structural Adhesive | Two-step acrylic, toughened, activator-cure structural adhesive. |
| Loctite 3310 One-Part Polyurethane Black | Loctite 3310 one-part polyurethane adhesive and sealant is a versatile product solution that can be used in a wide range of applications. |
| Loctite 3310 One-Part Polyurethane Grey | Loctite 3310 one-part polyurethane adhesive and sealant is a versatile product solution that can be used in a wide range of applications. |
| Loctite 3310 One-Part Polyurethane White | Loctite 3310 one-part polyurethane adhesive and sealant is a versatile product solution that can be used in a wide range of applications. |
| Loctite 3311 Light Cure Adhesive, Plastic/Metal | Low viscosity, slightly flexible, UV/V light cure adhesive. |
| LOCTITE 3318 | LOCTITE 3318 is suitable for a wide variety of coating applications that require strict humidity reliability performance, such as ITO/COG overcoat in LCD module assembly. |
| LOCTITE 3318M UV coating | LOCTITE 3318M UV coating for LCD module assembly. |
| Loctite 332 Structural Adhesive, Severe Environment | Two-step acrylic, no-mix, high temperature, high viscosity, multiple surface structural adhesive |
| Loctite 3321 Light Cure Adhesive, Plastic/Metal | Medium viscosity, slightly flexible, UV/V light cure adhesive. |
| LOCTITE 3323UV | LOCTITE 3323UV has been developed for encapsulation of wire bonded dies, used for Smartcard IC modules. It is designed for use only with Loctite UV fill encapsulants, such as 3327 and 3329. Either combination of dam and fill will pass mechanical stress testing and high reliability tests; typically thermal shock cycling -55 °C to +125 °C and humidity heat aging 85 °C / 85 % RH. |
| LOCTITE 3327UV | LOCTITE 3327 has been developed for encapsulation of wire bonded dies, used for Smartcard IC modules. It is designed for use only with LOCTITE UV dam encapsulants, such as LOCTITE 3323. This combination of dam and fill will pass mechanical stress testing and high reliability tests; typically thermal shock cycling -55 °C to +125 °C and humidity heat aging 85 °C / 85 % RH. |
| Loctite 3335 Light Cure Adhesive, UV Cationic Epoxy | Rigid, one-part, high temperature resistance, excellent surface cure, low shrinkage, and low outgassing |
| Loctite 3336 Light Cure Adhesive | Semi-rigid, two-part, medium viscosity epoxy, curable at room temperature or with heat |
| Loctite 3337 Light Cure Adhesive, UV Cationic Epoxy | Semi-rigid, general purpose, one-part, medium viscosity epoxy with excellent surface cure, low shrinkage, low outgassing |
| Loctite 334 Structural Adhesive, High Performance | Two-step acrylic, one-part, dual-cure, toughened, high viscosity, magnetl bonding adhesive |
| Loctite 3340 Light Cure Adhesive, UV Cationic Epoxy | Semi-rigid, chemically resistant, one-part, medium viscosity epoxy with excellent surface cure, low shrinkage, low outgassing |
| Loctite 3341 Light Cure Adhesive, Plasticized Substrates | Low viscosity, UV/V light cure adhesive. |
| Loctite 3345 Light Cure Adhesive, Glass/Metal | Medium viscosity, UV adhesive |
| Loctite 3355 Light Cure Adhesive, Pre-Activated Epoxy | Semi-flexible, UV/Visible light activated epoxy; delay curing, one-part, extremely low shrinkage, low outgass, and acid free |
| Loctite 3364 | A two-component urethane designed for flame resistance and fast cure |
| Loctite 3370 One-Part Polyurethane Black | Loctite 3370 one-part polyurethane adhesive and sealant is a versatile product solution that can be used in a wide range of applications. |
| Loctite 3370 One-Part Polyurethane Grey | Loctite 3370 one-part polyurethane adhesive and sealant is a versatile product solution that can be used in a wide range of applications. |
| Loctite 3370 One-Part Polyurethane White | Loctite 3370 one-part polyurethane adhesive and sealant is a versatile product solution that can be used in a wide range of applications. |
| Loctite 3381 Light Cure Adhesive, Flexible/Plastics | Medium viscosity, flexible, UV light cure adhesive. |
| Loctite 3407 OptiLOC Fiber Optic Adhesive, Silicone/Heat Cure | One part, heat cure silicone |
| Loctite 349 Impruv Light Cure Adhesive | Acrylic, high viscosity, UV light cure adhesive. |
| Loctite 3491 Light Cure Adhesive | Acrylic, medium viscosity, UV light cure adhesive. |
| Loctite 3492 Light Cure Adhesive | Acrylic, low viscosity, UV light cure adhesive, uv/visible, with fluorescence. |
| Loctite 3493 Light Cure Adhesive | Acrylic, high viscosity, UV light cure adhesive. |
| Loctite 3494 Light Cure Adhesive | Acrylic, medium viscosity, durable, UV/V light cure adhesive. |
| Loctite 3497 | White, color-matched seam sealant |
| Loctite 350 | Adhesive sealant |
| Loctite 3508 | Loctite 3508 is a lead-free, one-component epoxy cornerbond adhesive. Applied pre-reflow and allows self-alignment of SMT components during reflow operation. Used for lead-free applications. |
| Loctite 3509 | Loctite 3509 is a one component heat cure epoxy designed for use as board level cornerbond for IC packages such as CSP's and BGA's. |
| Loctite 3513 | Loctite 3513 is a reworkable, single-component epoxy used as a underfill for CSP or BGA's. |
| Loctite 3515 | Loctite 3515 is a one component epoxy adhesive, designed to allow self-alignment of SMT components during the reflow operation. |
| Loctite 3517 | Loctite 3517 is a one part, heat curable epoxy. It is designed for use as a reworkable CSP (FBGA) or BGA underfill for protection of solder joint against mechanical stress when used for hand held electronics devices. |
| LOCTITE 3517M reworkable underfill | LOCTITE 3517M one component reworkable underfill. |
| Loctite 352 Light Cure Adhesive | High viscosity, tough, flexible, vibration resistant UV light cure adhesive. |
| Loctite 3523 | Used to bond, seal or coat metal and glass components in industrial applications |
| Loctite 3525 Light Cure Adhesive | Acrylic, high viscosity, UV/V light cure adhesive. |
| Loctite 3526 Light Cure Acrylic | UV/V/Heat cure version of Loctite® 3525 |
| Loctite 3536 | Loctite 3536 is a reworkable, CSP/BGA underfill designed to cure rapidly at low temperatures. |
| Loctite 3541 | Halogen free structural 1-part polyurethane reactive hotmelt adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Excellent adhesion to plastics and short open time. |
| Loctite 3542 | Halogen free structural 1-part polyurethane reactive hot melt adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Excellent adhesion to plastics, metals, & glass. Extended open time vs. Loctite 3541. |
| Loctite 3548 | Loctite 3548 is a next generation reworkable underfill for thermal and mechanical reliability. |
| Loctite 3549 | Loctite 3549 is a next generation reworkable underfill for thermal and mechanical reliability. |
| Loctite 3551 | Loctite 3551 is a one component heat cure epoxy designed for use as board level underfill for IC packages such as CSP's and BGA's. |
| Loctite 3552 Indigo Light Cure Adhesive | Low viscosity, fluorescing, visible light cure medical device adhesive. |
| Loctite 3553 Indigo Light Cure Adhesive | High viscosity, fluorescing, visible light cure adhesive. |
| Loctite 3554 Indigo Light Cure Adhesive | Acrylic, low viscosity, fluorescing, visible light cure adhesive. |
| Loctite 3555 Indigo Light Cure Adhesive | Acrylic, medium viscosity, fluorescing, visible light cure adhesive. |
| Loctite 3556 Indigo Light Cure Adhesive | Acrylic, high viscosity, fluorescing, visible light cure medical device adhesive. |
| Loctite 3563 | Rapid curing, fast flowing, reworkable, liquid epoxy for use as a capillary flow underfill for packaged IC's |
| Loctite 3572 | Halogen free structural 1-part polyurethane reactive hotmelt adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Superior flexibility vs. traditional Reactive Polyurethane Hotmelts. Excellent adhesion to plastics, metals, & glass. Extended open time vs. Loctite 3542. |
| Loctite 3573 | Halogen free structural 1-part polyurethane reactive hot melt adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Black in color. Superior flexibility vs. traditional Reactive Polyurethane hot melts. Excellent adhesion to plastics, metals, & glass. Extended open time vs. Loctite 3542. |
| Loctite 3580 | Halogen free structural 1-part polyurethane reactive hot melt adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. UV preactivation provides best in class fixture time. Excellent adhesion to plastics, metals, & glass. |
| Loctite 3593 | Loctite 3593 is a nonreworkable, underfill for high mechanical reliability. Fast flow and snap cure for improved process time. |
| Loctite 3609 | Loctite 3609 is used for medium to high speed dispense applications. Excellent green strength for large components. |
| Loctite 3611 | Loctite 3611 is a stencil printable/pin transfer product for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. |
| LOCTITE 3612 | LOCTITE 3612 is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. |
| Loctite 3616 | Loctite 3616 is a high speed stencil print adhesive compatible with DEK Proflow and MPM Rheopump. Ultra low moisture pick-up. Pin transfer capable as well. |
| Loctite 3619 | Loctite 3619 is used for ultra low temperature cure, high speed syringe dispense. |
| Loctite 3621 | Loctite 3621 is a high performance for ultra high-speed syringe dispense. Recommended product for Dispense Jet. |
| Loctite 3627 | Loctite 3627 is a high speed stencil print adhesive compatible with DEK Proflow and MPM Rheopump. Recommended product for DEK Proflow Pumprint process. |
| Loctite 3629 | Loctite 3629 is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. |
| LOCTITE 3629C | LOCTITE 3629C is a one-component, halogen free, fast cure epoxy formulated for bonding surface mounted devices to printed circuit boards prior to wave soldering. |
| Loctite 363 Impruv Light Cure Adhesive | Acrylic, low viscosity, UV light cure adhesive. |
| Loctite 3631 Hysol Urethane Hot Melt Adhesive | Toughened, high strength moisture cure, hot melt adhesive |
| Loctite 36369 | Conrtolled Viscosity & Low Exotherm (85°C). |
| Loctite 36370 | Conrtolled Viscosity & Low Exotherm (85°C). |
| Loctite 3650 Hysol Polyolefin Hot Melt Adhesive | Polyolefin hot melt for plastic bonding |
| Loctite 366 Light Cure Adhesive | Acrylic, medium viscosity, UV light cure adhesive. |
| Loctite 3702 | Display sealant |
| Loctite 3705 Light Cure Adhesive | Loctite 3705 is an edgebond, UV cure adhesive designed for bonding electronics components on PCBs. |
| Loctite 3719 Light Cure Adhesive | UV acrylic adhesive. (LPD209) |
| Loctite 3720 | ITO/COG overcoat |
| Loctite 3730 | Display sealant |
| Loctite 3733 (LPD166) | UV acrylic adhesive. |
| Loctite 3736 | UV acrylic adhesive. |
| Loctite 3751 LiteTak Light Cure Adhesive | UV acrylic adhesive. |
| Loctite 3761 LiteTak Light Cure Adhesive | Medium viscosity, solvent free, UV light cure adhesive. |
| Loctite 37735 | Conrtolled Viscosity & Low Exotherm (85°C). |
| Loctite 3779 Light Cure Adhesive | UV acrylic adhesive. |
| Loctite 3780 | LOCTITE 3780 is a single component, UV light curable sealant for LCD end-sealing applications. |
| Loctite 3781 Light Cure Adhesive / Sealant | UV acrylic adhesive. (LPD181) |
| Loctite 3782 (LPD182) | Pin terminal, temporary bonding |
| Loctite 380 Black Max Instant Adhesive, Toughened | Low viscosity instant adhesive, black, rubber toughened. |
| Loctite 382 Tak Pak Ultra Performance Instant Adhesive | High viscosity instant adhesive, one part, room temperature cure. |
| LOCTITE 383 Output | LOCTITE 383 Output is a high-strength, room temperature cure adhesive for permanent assemblies. |
| Loctite 384 Output | Loctite 384 Output is a repairable, room temperature cure adhesive utilized for parts subject to disassembly. |
| Loctite 3851 | UV structural adhesive |
| Loctite 3860 | Loctite 3860 is a medium viscosity versatile epoxy casting system that exhibits high thermal conductivity and low thermal expansion. |
| Loctite 3861 | Loctite 3861 is a low viscosity versatile epoxy casting system that exhibits high thermal conductivity and low thermal expansion. |
| Loctite 3865HV | A two-component, UV curing epoxy |
| Loctite 3873 | Loctite 3873 is a fast curing, high-conductivity, self-shimming, room temperature cure, paste adhesive for bonding heat-generated devices to thermal spreader. |
| Loctite 3874 | Loctite 3874 is a fast-curing, high-conductivity, room temperature cure adhesive for bonding heat-generated devices to thermal spreader without glass beads. |
| Loctite 3875 | Loctite 3875 is the highest conductivity room temperature cure system. |
| Loctite 3876 | Loctite 3876 is the highest conductivity, self-shimming, room temperature cure system. |
| Loctite 3880 | Loctite 3880 is a general conductive paste adhesive designed for bonding of metals, ceramics, rubbers and plastics as used in electronic parts, where good adhesion combined with electrical and thermal conductivity is required. |
| Loctite 3888 | Loctite 3888 is a room temperature cure adhesive for applications requiring a combination of good mechanical and electrical properties. |
| Loctite 3900 | Loctite 3900 is an air-dry acrylic coating designed for small production runs. |
| Loctite 3911 Light Cure Adhesive | Low viscosity, UV/V light cure adhesive. |
| Loctite 3912 Light Cure Adhesive | Medium viscosity, UV/V light cure adhesive. |
| Loctite 3913 Light Cure Adhesive | Medium viscosity, UV/V light cure adhesive. |
| Loctite 392 Structural Adhesive, Magnet Bonder | One-part, dual-cure, toughened, high viscosity, two-step acrylic magnet bonding adhesive |
| Loctite 3921 Light Cure Adhesive, Plastic/Metal | Low viscosity, fluorescing, UV/V light cure adhesive with sterilization resistance. |
| Loctite 3922 Light Cure Adhesive, Plastic/Metal | Low viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance. |
| Loctite 3924 Light Cure Adhesive, Plastic/Metal | Medium viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance. |
| Loctite 3924AC AssureCure Light Cure Adhesive | AssureCure light cure adhesive can be provided in a range of viscosities, physical properties and package configurations. |
| Loctite 3926 Light Cure Adhesive, Plastic/Metal | High viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance. |
| Loctite 3933 Light Cure Adhesive | Medium viscosity, thixotropic, fluorescing, UV/V light curing adhesive with sterilization resistance. |
| Loctite 3936 Light Cure Adhesive, High Performance/Various Substrates | High viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance. |
| Loctite 3941 Light Cure Adhesive, High Performance/Various Substrates | Low viscosity, fluorescing, UV/V light curing medical device adhesive with sterilization resistance. |
| Loctite 3942 Light Cure Adhesive | Medium viscosity, fluorescing, UV/V light curing biocompatible adhesive with sterilization resistance. |
| Loctite 3943 Light Cure Adhesive, High Performance/Various Substrates | High viscosity, fluorescing, UV/V light curing adhesive with sterilization resistance. |
| Loctite 3944 Light Cure Adhesive | Medium viscosity, fluorescing, UV/V light curing biocompatible adhesive. |
| Loctite 394R Conformal Coating | Conformal coating. |
| Loctite 3971 Light Cure Adhesive | Low viscosity, UV/V light curing medical device adhesve, fluorescing. |
| Loctite 3972 Light Cure Adhesive | Medium viscosity, UV/V light curing medical device adhesive, fluorescing. |
| Loctite 3974 Light Cure Adhesive | Flexible, high viscosity, fluorescing, UV/V light cure acrylic adhesive |
| Loctite 3979 Light Cure Adhesive Gel | Acrylic, rapid-curing, UV/visible, non-sag gel |
| Loctite 3981 Hysol Epoxy Structural Adhesive, High Performance/Various Substrates | One-part, heat cure, toughened, highly flourescent, low viscosity epoxy and multiple surface structural adhesive |
| Loctite 3982 Hysol Epoxy Adhesive, High Performance/Various Substrates | One-part, heat cure, toughened, highly flourescent, medium viscosity epoxy |
| Loctite 3984 Hysol Epoxy Structural Adhesive | One-part, heat cure, toughened, highly flourescent, high viscosity epoxy |
| Loctite 3985 Hysol Epoxy Adhesive, Non-sag | One-part, heat-cure, toughened, non-sag, high viscosity, motor armature bonding epoxy, multiple surface structural adhesive |
| Loctite 3987 | Aluminum filled heat cure epoxy specifically designed for HDD coilbond applications |
| Loctite 401 Prism Instant Adhesive, Surface Insensitive | Fast curing cyanoacrylate, low / medium viscosity, one part, room temperature cure, surface insensitive instant adhesive. |
| Loctite 4011 Prism Instant Adhesive | Low viscosity instant adhesive, surface insensitive, one part, room temperature cure. |
| Loctite 4013 Prism Instant Adhesive | Medium viscosity, one-part room temperature cure, instant adhesive. |
| Loctite 4014 Prism Instant Adhesive | Very low viscosity instant adhesive, one-part room temperature cure. |
| Loctite 403 Prism Instant Adhesive, Low Odor/Low Bloom | High viscosity instant adhesive, gap filling, low odor / low bloom, for applications with high cosmetic appearance and/or where vapor control is difficult. |
| Loctite 4031 Prism Low Odor / Low Bloom Instant Adhesive | Very low viscosity instant adhesive, low odor / low bloom, surface insensitive. |
| Loctite 404 Quick Set Instant Adhesive | General maintenance and repair, one part, room temperature cure, instant adhesive. |
| Loctite 4046 Hysol Hot Melt Adhesive | Highly flexible, 60-second open time EVA hot melt |
| Loctite 406 Prism Instant Adhesive | Fast curing cyanoacrylate, one part, room temperature cure, low viscosity instant adhesive. |
| Loctite 4061 Prism Instant Adhesive | Wicking grade, surface insensitive, one part, room temperature cure, low viscosity instant adhesive. |
| Loctite 408 Prism Instant Adhesive, Low Odor / Low Bloom | Very low viscosity instant adhesive, low odor / low bloom, one part room temperature cure, wicking grade. |
| Loctite 4081 Prism Low Odor / Low Bloom Instant Adhesive | Very low viscosity instant adhesive, low odor / low bloom, one part room temperature cure. |
| Loctite 409 Super Bonder Instant Adhesive Gel | General purpose, high viscosity instant adhesive. |
| Loctite 410 Prism Instant Adhesive, Black/Toughened | High viscosity instant adhesive, black, rubber toughened, one part, room temperature cure. |
| Loctite 411 Prism Instant Adhesive, Clear Toughened | High viscosity instant adhesive, clear toughened, one part, room temperature cure. |
| Loctite 412 Super Bonder Instant Adhesive | Designed for temporary bonding applications |
| Loctite 414 Super Bonder Instant Adhesive | General purpose cyanoacrylate adhesive |
| Loctite 415 Super Bonder Instant Adhesive | General purpose adhesive particularly suited to bonding of metal substrates. |
| Loctite 416 Super Bonder Instant Adhesive | General purpose cyanoacrylate instant adhesive. |
| Loctite 4161 Super Bonder Instant Adhesive | High viscosity instant adhesive, one-part room temperature cure. |
| Loctite 417 Super Bonder Instant Adhesive | Designed for temporary bonding applications |
| Loctite 420 Super Bonder Instant Adhesive | General purpose, low viscosity instant adhesive, wicking type plastic bonder. |
| Loctite 4203 Prism Instant Adhesive, Thermal Resistant | Toughened thermally resistant instant adhesive |
| Loctite 4204 Prism Instant Adhesive, Thermal Resistant | High viscosity instant adhesive, toughened, thermally resistant. |
| Loctite 4205 Prism Instant Adhesive, Thermal Resistant Gel | High viscosity instant adhesive, toughened, thermally resistant |
| Loctite 4206 Prism Low Odor / Low Bloom Instant Adhesive | Instant adhesive for medical device use. |
| Loctite 422 Super Bonder Instant Adhesive | General purpose, high viscosity instant adhesive / gap filling plastic bonder |
| Loctite 425 Assure Plastic Fastener Blue Threadlocker | Threadlocker for small metal and plastic fasteners and tamper-proofing, up to 180°F. |
| Loctite 426 Instant Adhesive, Black/Toughened Gel | High viscosity instant adhesive, black, rubber toughened. |
| Loctite 430 Super Bonder Instant Adhesive | General purpose adhesive and is particularly suited to bonding of metal substrates. |
| Loctite 4305 FlashCure Light Cure Instant Adhesive | Light cure instant adhesive designed for bonding applications that require very rapid fixturing, fillet cure or surface cure. |
| Loctite 4306 Flashcure Light Cure Instant Adhesive | Low viscosity instant adhesive, one part, UV/V light fast curing cyanoacrylate. |
| Loctite 4307 Flashcure Light Cure Instant Adhesive | High viscosity instant adhesive, one part, flourescing , UV/V light fast curing cyanoacrylate. |
| Loctite 431 Prism Instant Adhesive | High viscosity instant adhesive, gap filling, surface insensitive, one part, fast curing cyanoacrylate. |
| Loctite 4310 Flashcure Light Cure Instant Adhesive | Fast curing cyanoacrylate, toughened, light cure, designed for bonding applications that required a toughened product, very rapid fixturing, fillet cure or surface cure. |
| Loctite 4311 Flashcure Light Cure Instant Adhesive | Fast curing cyanoacrylate, toughened, high viscosity, designed for bonding applications that required a toughened product, very rapid fixturing, fillet cure or surface cure. |
| Loctite 435 Prism Instant Adhesive, Clear/Toughened | Low viscosity instant adhesive, clear, surface insensitive, rubber toughened, one part, room temperature cure. |
| Loctite 438 Prism Instant Adhesive, Black/Toughened | Low viscosity instant adhesive, black, surface insensitive, rubber toughened, one part, room temperature cure. |
| Loctite 444 Tak Pak Instant Adhesive | Medium viscosity instant adhesive for electronics tacking |
| Loctite 454 Prism Instant Adhesive Gel | High viscosity instant adhesive, one part, surface insensitive, room temperature cure. |
| Loctite 4541 Prism Instant Adhesive Gel | High viscosity instant adhesive, one part, surface insensitive, room temperature cure. |
| Loctite 455 Prism Instant Adhesive Gel, Low Odor / Low Bloom | High viscosity instant adhesive, low odor / low bloom, suitable for porous surfaces and vertical or overhead applications. |
| Loctite 460 Prism Instant Adhesive, Low Odor / Low Bloom | Low viscosity instant adhesive, low odor / low bloom, one part room temperature cure. |
| Loctite 4601 Prism Low Odor / Low Bloom Instant Adhesive | Low viscosity instant adhesive, low odor / low bloom, one part room temperature cure, designed for applications with high cosmetic appearance and/or where vapor control is difficult. |
| Loctite 480 Prism Instant Adhesive, Black/Toughened | Low viscosity instant adhesive, black, rubber toughened, one part, room temperature cure, designed for bonding metal, rubber and selected plastics. |
| Loctite 4851 Prism Instant Adhesive, Flexible | Medium viscosity, flexible instant adhesive |
| Loctite 4861 Prism Instant Adhesive, Flexible | Flexible, high viscosity instant adhesive. |
| Loctite 493 Super Bonder Instant Adhesive | Particularly suited to bonding of metal substrates. |
| Loctite 495 Super Bonder Instant Adhesive | Designed to bond rubber, metal, and plastic parts. |
| Loctite 496 Super Bonder Instant Adhesive | General purpose adhesive and is particularly suited to bonding of metal substrates. |
| Loctite 498 Super Bonder Instant Adhesive | Thermal cycling resistant, a medium viscosity, high temperature product for all metals, and most plastics and rubbers. |
| Loctite 4981 Super Bonder Instant Adhesive | Medium viscosity, thermal cycling, one-part, room temperature cure, instant adhesive. |
| Loctite 499 Super Bonder Instant Adhesive | General purpose adhesive suitable for applications where heat resistance is required |
| Loctite 5 Minute Bonder | Clear, two-component epoxy |
| Loctite 5025 | Suitable for potting electrical switches and other devices. |
| Loctite 5025A | Non-silicone potting material |
| Loctite 503 Vibra-Seal | A low viscosity, non-toxic, water-based, preapplied thread sealant |
| Loctite 5030 Dri-Seal | General purpose, low viscosity, preapplied thread sealant |
| Loctite 5031 Nuva-Sil Silicone Light Cure Potting Compound | One part, UV or visible light curing, high speed silicone potting compound |
| Loctite 5033 Nuva-Sil Silicone Light Cure Adhesive / Sealant | One part, UV or visible light and moisture curing, high speed silicone |
| Loctite 5038 Nuva-Sil Silicone Adhesive / Sealant | Provides the properties of 5039™ while offering improved humidity / moisture resistance. |
| Loctite 5039 Nuva-Sil Silicone Light Cure Adhesive / Sealant | One part, UV or visible light and moisture curing, high speed silicone |
| Loctite 503HV Vibra-Seal | A high viscosity, non-toxic, water-based, preapplied thread sealant |
| Loctite 504 Gasket Eliminator Flange Sealant | Rigid, low viscosity, self-shimming flange sealant - Top Pick |
| Loctite 5040 Industrial Grade Silicone Adhesive / Sealant | Used for potting, coating and sealing of various automotive, military and industrial components. |
| Loctite 5050 Fastgasket Light Cure Adhesive / Sealant | UV light curing, non-corrosive silicone adhesive / sealant. |
| Loctite 5055 Silicone Light Cure Adhesive / Sealant | Self-leveling, flowable silicone adhesive sealant |
| Loctite 5056 Silicone Light Cure Adhesive / Sealant | Self-leveling, high adhesion silicone adhesive sealant |
| Loctite 5083 Nuva-Sil Silicone Potting Compound | One part, dual cure; UV/moisture, acetoxy silicone; thixotropic paste for gasketing, sealing, and bonding |
| Loctite 5088 Sealant | Loctite 5088 is used for potting, coating and sealing of various automotive, electronic, military and industrial components. |
| Loctite 5089 Nuva-Sil Silicone Gasket / Sealant | Used for gasketing and sealing applications |
| Loctite 509 Gasket Eliminator Flange Sealant | Flexible, medium strength, low pressure flange sealant fluoresces blue - Top Pick |
| Loctite 5091 Nuva-Sil Silicone Light Cure Potting Compound, High Adhesion | One part, dual cure; UV/moisture, acetoxy silicone; low viscosity for potting and encapsulating applications |
| Loctite 5092 Nuva-Sil | A low viscosity, self-leveling, UV curing silicone that provides low outgassing cure characteristics. |
| Loctite 510 Gasket Eliminator Flange Sealant | Medium strength, high temperature flange sealant resists low on-line test pressures, uncured - Top Pick |
| Loctite 5110 Porosity Sealant | Electrical grade anaerobic sealant |
| Loctite 5127 Flexible Anaerobic Gasket | Flexible anaerobic gasket, flange sealant. |
| Loctite 513 Dri-Seal | Low viscosity, high temperature (350ºF), preapplied thread sealant for metal and plastics |
| Loctite 513 HV Dri-Seal | High viscosity, high temperature (350ºF), preapplied thread sealant for metal and plastics |
| Loctite 5140 | Used for potting, coating and sealing of various automotive, electronic, military and industrial components. |
| Loctite 5145 | Loctite 5145 is designed for bonding, sealing and coating electronic devices. |
| Loctite 515 Gasket Eliminator Flange Sealant | Flexible flange sealant for use on rigid machined flanges - Top Pick |
| Loctite 516HV Vibra-Seal | A high viscosity, non-toxic water-based, preapplied thread sealant |
| Loctite 517 Vibra-Seal | A low viscosity, non-toxic, water-based, preapplied thread sealant |
| Loctite 518 Gasket Eliminator Flange Sealant | Medium strength, flexible gasketing material - Top Pick |
| Loctite 5182 Flange Sealant | Flexible, solvent resistant flange sealant that will not tear or decay. |
| Loctite 5188 Flange Sealant | An ultra-tough, flexible anaerobic flange sealant - Top Pick |
| Loctite 5192 | Loctite® Liquid Optically Clear Adhesives (LOCAs) (with chemistry) silicone |
| Loctite 5192DM | Loctite® Liquid Optically Clear Adhesives (LOCAs) (with chemistry) silicone |
| Loctite 5203 Flange Sealant | Seals close fitting joints between rigid metal faces and flanges |
| Loctite 5210 | Loctite 5210 is an ultra fast curing, non-corrosive RTV silicone designed for potting, wire tracking, selective sealing, vibration dampening and repair/rework applications on PCB's. |
| Loctite 5240 Nuva-Sil Silicone Light Cure Adhesive Sealant | Self leveling, non-corrosive, UV/moisture silicone with high adhesion for difficult-to-bond substrates |
| Loctite 5251 UV Sealant | An acrylic cured-in-place gasket that cures 100% by UV light. |
| Loctite 5251A UV Sealant | An acrylic cured-in-place gasket that cures 100% by UV light. |
| Loctite 5290 | Loctite 5290 is a solvent-free, low viscosity, UV/moisture cure silicone suited to brush, dip and selective coating. |
| Loctite 5293 | Loctite 5293 is a repairable, solvent-free, medium viscosity, UV / moisture cure silicone suited to brush, dip and selective coating. |
| Loctite 5296 | Loctite 5296 is a heat cure silicone that can be applied with brush, dip or spray. High reliability automotive. Clear. |
| Loctite 5404 Output | Loctite 5404 Output is a self-shimming, heat cure, flexible silicone adhesive paste for demanding parts such as ceramic boards. |
| LOCTITE 5406TA Thermal Adhesive | LOCTITE 5406TA is a one component flexible RTV silicone adhesive engineered to enhance load bearing and shock absorbing properties of the bonded area. |
| Loctite 542 Thread Sealant | Recommended for sealing the fine threads of hydraulic and pneumatic connectors. |
| Loctite 5421 | Loctite 5421 is an RTV silicone paste adhesive that provides EMI / RFI shielding on electronic device enclosures. |
| Loctite 545 Thread Sealant | Specially formulated to offer high lubricity for easy assembly and removal - Top Pick |
| Loctite 5451 Thread Sealant | Low odor formula suited for applications in sensitive areas or confined spaces. |
| Loctite 5452 Fast Cure Thread Sealant | Fast cure thread sealant designed for hydraulic / pneumatic fittings - Top Pick |
| Loctite 549 Instant Seal Plastic Gasket Sealant | High viscosity, high strength anaerobic adhesive which cures rapidly between metal surfaces. |
| Loctite 5510 Adhesive / Sealant - Black | Elastomeric adhesive/sealant based on Henkel's proprietary Flextec technology, black color |
| Loctite 5510 Adhesive / Sealant - Clear | Elastomeric adhesive based on Henkel's proprietary Flextec technology, clear color. |
| Loctite 5510 Adhesive / Sealant - Grey | Elastomeric adhesive/sealant based on Henkel's proprietary Flextec technology, grey color |
| Loctite 5510 Adhesive / Sealant - White | Elastomeric adhesive/sealant based on Henkel's proprietary Flextec technology, white color |
| Loctite 5512 Adhesive / Sealant | One part humidity moisture curing elastic adhesive / sealant, silane modified polymer based on Flextec™ Technology. |
| Loctite 554 Thread Sealant, Refrigerant Sealant | Chemical resistant thread sealant. Recommended for refrigeration systems - Top Pick |
| Loctite 5570 Flexible Adhesive | Elastomeric adhesive based on Henkel's proprietary Flextec technology |
| Loctite 5572 Adhesive | One part humidity moisture curing elastic adhesive, silane modified polymer based on Flextec™ Technology. |
| Loctite 5590 Adhesive | A two-component adhesive for elastic bonding where the curing rate of one-component adhesives is too slow, based on Flextec™ Technology |
| Loctite 5600 Silicone Adhesive / Sealant | Two part, fast cure silicone system with 5-minute fixture time |
| Loctite 5604 Silicone Adhesive / Sealant | Heavy bodied, high strength adhesive & sealant with 10-minute fixture time |
| Loctite 5605 Silicone Adhesive / Sealant, Grey | Two-part silicone adhesive / sealant, 5 minute fixture time |
| Loctite 5606 Silicone Adhesive / Sealant, Grey | Two-part, non-corrosive silicone adhesive & sealant, 10-minute fixture time |
| Loctite 5607 Silicone Adhesive / Sealant, Grey | Two-part, 50-minute fixture, oil resistant silicone adhesive sealant |
| Loctite 5611 Silicone Potting Compound | Self Leveling, NonCorrosive, Flame Retardant Silicone Potting Compound |
| Loctite 5611F Silicone Potting Compound | Self Leveling, NonCorrosive, Flame Retardant Silicone Potting Compound |
| Loctite 5611S Silicone Sealant | A 2-part static-mixable, self-leveling silicone sealant. |
| Loctite 5613 Silicone Sealant, Black | Two-part, oil-resistant silicone. Tack-free in 10 minutes. |
| Loctite 5620 Silicone Potting Compound, Ultra-Clear | Two-part, ultra-clear silicone, 30-minute cure speed |
| Loctite 5623 Silicone Potting Compound, Ultra-Clear | Two-part, ultra-clear, tack-free, non-corrosive silicone potting compound gel |
| Loctite 5625 Silicone Potting Compound, Ultra-Clear | Ultra-clear, soft re-enterable gel silicone potting compound |
| Loctite 564 Thread Sealant | General purpose thread sealant cures rapidly to provide immediate low pressure sealing - Top Pick |
| Loctite 565 Thread Sealant | General purpose instant sealer for metal tapered and straight/tapered pipe thread fittings - Top Pick |
| Loctite 567 PST Thread Sealant with PTFE | General purpose high temperature thread sealant with excellent solvent resistance, allows easy disassembly - Top Pick |
| Loctite 569 Thread Sealant, Hydraulic Sealant | High strength hydraulic sealant. |
| Loctite 5699 Grey, High Performance RTV Silicone Gasket Maker | One part RTV silicone, remains flexible, withstands vibration |
| Loctite 571 Thread Sealant | Chemical resistant, medium strength thread sealant designed for locking and sealing against corrosive products. Shows excellent strength after long exposures to many chemicals. |
| Loctite 572 Thread Sealant | A low strength sealant with moderate fixture speed for use on coarse threads. |
| Loctite 573 Flange Sealant | Form-in-place gasket for rigid flanges. |
| Loctite 574 Flange Sealant | Fast curing, flange sealant. |
| Loctite 577 Thread Sealant | Medium strength, general purpose sealant for use on coase-threaded components. |
| Loctite 5770 High Temperature Thread Sealant | Designed to seal threaded pipe fittings in applications requiring continuous heat resistance up to 530° F (277° C). - Top Pick |
| Loctite 5772 Low Halogen, Low Sulfur Thread Sealant | Especially developed for use on sensitive metals, like titanium, used in the nuclear industry. |
| Loctite 579 Thread Sealant | A general purpose pipe sealant that cures into a resistant plastic. |
| Loctite 580 PST Low Halogen, Low Sulfur Thread Sealant | Designed for the locking and sealing thread fittings in fossil fuel, solar and hydro power plant piping systems. |
| Loctite 5802 High Purity Thread Sealant | A high purity, low halogen thread sealant formulated to meet the green limit requirements of the nuclear industry - Top Pick |
| Loctite 5810A Polyacrylate Sealant | High modulus, polyacrylate (ACM), formed-in-place flange sealant with excellent chemical resistance |
| Loctite 5810F Fluorescent Polyacrylate Sealant | High modulus, polyacrylate (ACM), formed-in-place flange sealant with UV tracers, excellent chemical resistance |
| Loctite 587 Blue, High Performance RTV Silicone Gasket Maker | One part RTV silicone, forms tough, flexible gaskets directly on flange, recommended for sealing all types of flanges - Top Pick |
| Loctite 5900 Flange Sealant, Heavy Body RTV Silicone | One part RTV silicone, superior flexibility and adhesion, instant seal, excellent fluid resistance, non-corrosive |
| Loctite 5904 Flange Sealant, RTV Silicone | RTV silicone provides the performance of 5900™ while offering more robust resistance to other fluids including water/glycol. |
| Loctite 5905 Flange Sealant, RTV Silicone | One part RTV silicone, superior flexibility and adhesion, fast depth of cure, black |
| Loctite 5905 White Flange Sealant, RTV Silicone | Superior flexibility and adhesion, fast depth of cure, white |
| Loctite 5910 Flange Sealant, RTV Silicone | One part RTV silicone, superior flexibility and adhesion, excellent fluid resistance |
| Loctite 5915 Flange Sealant, RTV Silicone | Similar properties of 5910™ with better resistance to oil foaming. |
| Loctite 592 PST Thread Sealant | High temperature thread sealant that locks and seals threaded fittings. |
| Loctite 5920 Copper, High Performance RTV Silicone Gasket Maker | One part RTV silicone, superior flexibility and adhesion, excellent high temperature resistance |
| Loctite 5939 Sealant | High strength, high elongation, color matched, paintable sealant |
| Loctite 5945 Flange Sealant, RTV Silicone | Flange sealant provides superior flexibility and adhesion. Provides an instant seal with extended open time for processing flexibility. Excellent fluid resistance. Non-corrosive. Low odor. Low volatility. |
| Loctite 5950 Fastgasket Flange Sealant | One part UV cure, secondary moisture cure, black |
| Loctite 5951 Fastgasket Flange Sealant | One part UV cure, secondary moisture cure, clear |
| Loctite 5960 Fastgasket Flange Sealant | One part UV cure, fluid resistant |
| Loctite 5963 Procure Cure-In-Place Gasket | Superior compression set resistance cured-in-place gasket, great for power-train applications. |
| Loctite 5964 Procure Cure-In-Place Gasket | Soft silicone, cured-in-place gasket with high elongation, heat or microwave cure |
| Loctite 5970 Flange Sealant, RTV Silicone | High modulus, non-oxime, RTV silicone, form-in-place flange sealant |
| Loctite 598 Black High Performance RTV Silicone Gasket Maker | One part RTV cure silicone that retains high flexibility and oil resistance |
| Loctite 5999 Heavy Body, Grey, High Performance RTV Silicone Gasket Maker | One part RTV cure silicone for rigid flange assemblies, instant seal, excellent fluid resistance |
| Loctite 5th Wheel Grease | Designed to lubricate 5th wheel top plates of trailer |
| Loctite 6001 RC SURFACE INSENS 1LT BO | Loctite 6001 is designed for the bonding of cylindrical fitting parts. |
| Loctite 6002 Hysol Hot Melt Adhesive | Loctite Hysol 6002 hot melt is an EVA-based, fast setting adhesive with excellent hot tack which is recommended for packaging applications. |
| Loctite 603 Retaining Compound | Press fit, oil tolerant retaining compound - Top Pick |
| Loctite 608 Hysol Epoxy Structural Adhesive, High Strength | Fast setting, high strength, medium viscosity, low odor, clear epoxy, multiple structural adhesive |
| Loctite 609 Retaining Compound | Low viscosity, rapid-curing retaining compound to augment press fits - Top Pick |
| Loctite 615 Hysol Epoxy Structural Adhesive, Sandable | Fast setting, sandable, gap filling, high viscosity, blue epoxy, multiple surface structural adhesive |
| Loctite 620 Retaining Compound | Slip fit, high temperature liquid retaining compound - Top Pick |
| Loctite 635 Retaining Compound | Slip fit, high strength, slow cure retaining compound |
| Loctite 638 Retaining Compound | High strength retaining compound. |
| Loctite 640 Retaining Compound | High strength, high temperature retaining compound. |
| Loctite 641 Retaining Compound | Controlled strength retaining compound for press and slip fits - Top Pick |
| Loctite 642 Retaining Compound | Medium strength retaining compound, press & slip fits, controlled strength. |
| Loctite 648 Retaining Compound | A retaining compound recommended for continuous working temperatures up to 300 degrees F - Top Pick |
| Loctite 6485 Retaining Compound | Halogen-free, low tin anaerobic retaining compound |
| Loctite 660 Quick Metal Retaining Compound, Press Fit Repair | A creamy, non-running adhesive/sealant used for repairing worn coaxial parts without remachining - Top Pick |
| Loctite 675 Retaining Compound | General purpose, low viscosity, self-hardening retaining compound. |
| Loctite 680 Retaining Compound | High strength, low viscosity slip fit retaining compound - Top Pick |
| Loctite 6C Hysol Epoxy Adhesive | General purpose, bonds and seals, machinable, gap filling, grey epoxy |
| Loctite 7075 Activator | Acetone-based activator that promotes the proper cure of acrylic adhesives |
| Loctite 7088 | LOCTITE® 7088™ is a reactive monomer based "solvent free" surface primer that is supplied as a wax-like semi-solid, conveniently packaged in a self-feeding stick applicator. |
| Loctite 7088 Semi-Solid Stick Primer | Anaerobic primer for Loctite threadlockers in semi-solid stick form. On part life 30 days. |
| Loctite 7090 Primer | Liquid anaerobic primer for Loctite threadlockers. On part life 1 hour. |
| Loctite 7109 Tak Pak II Accelerator | Increases cure speed of Loctite® instant adhesives when your application requires a fast curing cyanoacrylate. |
| Loctite 7113 Accelerator | Increases cure speed of instant adhesives when your application requires a fast curing cyanoacrylate. |
| Loctite 712 Tak Pak Accelerator | Increases cure speed of instant adhesives when your application requires a fast curing cyanoacrylate. |
| Loctite 713 Prism Medical Device Adhesive Accelerator | Increases cure speed of instant adhesives when your application requires a fast curing cyanoacrylate. |
| Loctite 7360 Surface Mount Adhesive Cleaner | Loctite 7360 Surface Mount Adhesive Cleaner is a nozzle and dispense machine component cleaner. Excellent for removal of uncured adhesive from the board without causing the adhesive to gel. |
| Loctite 7380 Depend Solventless Activator | Solvent-free activator allowing the immediate mating of parts |
| Loctite 7387 Depend Activator | Activator designed to initiate the cure of Loctite toughened acrylic adhesives such as Loctite 315, 383 & 384. |
| Loctite 740 Hysol Hot Melt Adhesive | Loctite Hysol 740 hot melt is an EVA-based, fast setting adhesive recommended for packaging applications. |
| Loctite 740LV Hysol Hot Melt Adhesives | An EVA-based, fast setting adhesive that is a lower viscosity version of Hysol 740™ Hot Melt. |
| Loctite 7419 Surface Activator | Halogen-free, non-CFC solvent based surface activator |
| Loctite 7451 Prism Medical Device Adhesive Accelerator | Increases cure speed of instant adhesives when your application requires a fast curing cyanoacrylate and has aggressive cleaning properties. |
| Loctite 7452 Tak Pak Accelerator | Increases cure speed of instant adhesives when your application requires a fast curing cyanoacrylate and has aggressive cleaning properties. |
| Loctite 7453 Tak Pak Accelerator | Loctite 7453 has been formulated with "cleanroom" grade acetone for applications in the electronics industry. |
| Loctite 7460 Hysol SprayPac Polyshot Hot Melt Adhesive | A formulated for spray applications. |
| Loctite 7471 MIL-SPEC Primer 1 | Acetone/isopropanol base primer available in liquid or aerosol formulas. On part life 7 days. Dry time 30-70 seconds. |
| Loctite 7649 MIL-SPEC Primer | Acetone base primer available in liquid and aerosol formulas. On part life 30 days. Dry time 30-70 seconds. |
| Loctite 768 X-NMS Cleanup Solvent | Dissolves cured cyanoacrylate based adhesives |
| Loctite 770 Prism Primer | Adhesion promoter for instant adhesives on hard-to-bond plastics and elastomers |
| Loctite 7701 Prism Medical Device Adhesive Primer | Adhesion promoter for instant adhesives on hard-to-bond plastics and elastomers |
| Loctite 7804 Hysol Hot Melt Adhesive | Loctite Hysol 7804 polyamide hot melt is a tough, elastomeric, high performance adhesive with excellent impact resistance at low temperatures. |
| Loctite 7804FRM-HV Hysol Hot Melt Adhesive | Flame retardant, polyamide, hot melt adhesive |
| Loctite 7805 Hysol Hot Melt Adhesive | Polyamide based, hot melt adhesive for bonding to a wide variety of substrates |
| Loctite 7809FR Hysol Hot Melt Adhesive | Modified with fire retardant materials. |
| Loctite 7811 Hysol Hot Melt Adhesive | High performance, polyamide hot melt |
| Loctite 7901 Hysol Hot Melt Adhesive | Low viscosity polyamide |
| Loctite 793 Prism Primer | Adhesion promoter, non-flammable, for instant adhesives on hard-to-bond plastics and elastomers |
| Loctite 7951 Prism Primer | Adhesion promoter, non-flammable, non-combustible, for instant adhesives on hard-to-bond plastics and elastomers |
| Loctite 907 Hysol Epoxy Adhesive | General purpose, mix ratio insensitive, surface intolerant, 20 minute working life epoxy |
| Loctite 9340 Hysol Epoxy Structural Adhesive High Temperature | High temperature and chemical resistant, high viscosity, multiple substrate bonder, 90 minute working life epoxy, multiple surface structural adhesive |
| Loctite 9412 Hysol Epoxy Adhesive | General purpose, self leveling, flowable, potting, flexible, 65 minute working life epoxy |
| Loctite 9430 Hysol Epoxy Structural Adhesive, High Strength | Toughened, light paste, high peel, high shear strength, 40 minute working life epoxy, multiple surface structural adhesive |
| Loctite 9432NA Hysol Epoxy Structural Adhesive, Non-Sag | One-part paste, heat-cure, excellent high temperature performance and chemical resistance, non-sag, surface insensitive epoxy, multiple surface structural adhesive |
| Loctite 9433 Hysol Epoxy Adhesive | High strength, flowable, self-leveling, toughened, high peel resistance epoxy |
| Loctite 9459 Hysol Epoxy Structural Adhesive | One-part medium viscosity, heat-cure, excellent high temperature performance and chemical resistance, self-leveling, white epoxy, multiple surface structural adheisve |
| Loctite 9460 Hysol Epoxy Structural Adhesive, Non-Sag | Impact resistant, high viscosity, high peel, high shear strength, non-sag, 40 minute working life epoxy, multiple surface structural adhesive |
| Loctite 9460F Hysol Epoxy Adhesive | Impact resistant, high viscosity, high peel, high shear strength, non-sag, 20 minute working life epoxy |
| Loctite 9460PB Hysol Epoxy Adhesive | Impact resistant, high viscosity epoxy, high peel, high shear strength, non-sag, extended 100 minute working life for bonding printing blanket stock |
| Loctite 9462 Hysol Epoxy Structural Adhesive | Impact resistant, toughened, non-sag, medium viscosity epoxy multiple surface structural adhesive with a 55 minute working life |
| Loctite A 304-10-1 | Loctite A 304-10-1 is a one component, heat cured epoxy adhesive. |
| Loctite A 304-26 | Loctite A-304-26 is single component, pourable heat cure epoxy with excellent thermal stability and resistance to many chemicals. |
| Loctite A 304-29 | Loctite A-304-29 is single component, pourable heat cure epoxy with excellent thermal stability and resistance to many chemicals. |
| Loctite A 316-30 | Loctite A-316-30 is single component, thixotropic (non-sagrheology), heat cure epoxy with excellent thermal stability and resistance to many aggressive and harsh chemicals. |
| Loctite A 316-43 | |
| Loctite A 329-14 | Loctite A-329-14 is single component, thixotropic heat cure epoxy with excellent thermal stability and resistance to many chemicals. |
| Loctite A-533 Structural Adhesive | Ultra-fast fixture, multiple surface structural adhesive |
| Loctite A-534R Activator | Solvent-free activator |
| Loctite A-633 Structural Adhesives | Medium fixture time, external mix acrylic |
| Loctite A-671 Structural Adhesive | Two-step acrylic, toughened adhesive that combines ease of use with a high level of performance. |
| Loctite A-6750 Structural Adhesive | Two-step acrylic, toughened structural adhesive |
| LOCTITE ABLESTIK ABP 8060T Electrically Conductive Die Attach Paste | LOCTITE ABLESTIK ABP 8060T electrically die attach paste. |
| LOCTITE ABLESTIK ABP 8062T Electrically Conductive Die Attach Paste | LOCTITE ABLESTIK ABP 8062T electrically conductive die attach paste. |
| LOCTITE ABLESTIK ABP 8064T Electrically Conductive Die Attach Paste Adhesive | LOCTITE ABLESTIK ABP 8064T highly filled, conductive die attach adhesive. |
| LOCTITE ABLESTIK ABP-2100AC Die Attach Adhesive | LOCTITE ABLESTIK ABP-2100AC die attach adhesive is designed for Pb-free array packaging. |
| LOCTITE ABLESTIK ATB-F125E Adhesive Film Die Attach | LOCTITE ABLESTIK ATB-F125E Adhesive Film Die Attach. |
| LOCTITE ABLESTIK CDF 200 Conductive Die Attach Film | LOCTITE ABLESTIK CDF 200 highly filled, conductive die attach film adhesive. |
| LOCTITE ABLESTIK SSP-2000 silver sintering paste | LOCTITE ABLESTIK SSP-2000 silver sintering paste die attach adhesive for high power devices. |
| Loctite All Purpose Spray Adhesive | Fast drying, won't shrink or bleed, resists water, and humidity |
| Loctite All Purpose Spray Adhesive (Automotive Aftermarket Only) | Fast drying, won't shrink or bleed, resists water, and humidity |
| Loctite Anti-Seize | Preapplied, "dry" anti-seize lubricant |
| Loctite Aviation Gasket Sealant | Slow-drying, non-hardening brushtop, close tolerance flanges, flexible cure for aviation and automotive applications - Top Pick |
| Loctite Aviation Gasket Sealant (Automotive Aftermarket Only) | Slow-drying, non-hardening brushtop for aviation and automotive applications |
| Loctite Axle Tube Sealant | An anaerobic sealant specifically designed for sealing axle tubes. |
| Loctite Bearing Mount Stick - High Temperature (Automotive Aftermarket Only) | Revolutionary method to bond non-threaded, cylindrical metal assemblies |
| Loctite Belt Dressing & Conditioner | Recommended to prevent slipping and increase friction for all types of belts |
| Loctite Belt Dressing & Conditioner (Automotive Aftermarket Only) | Recommended to prevent slipping and increase friction for all types of belts |
| Loctite Big Foot Acrylic Pedestrian Grade | Single-component, elastomeric, anti-slip, floor and deck coating |
| Loctite Big Foot Acrylic Primer | Single-component, zero VOC, water-based |
| Loctite Big Foot Flexible Low Profile Exterior Grade | Single component, water based anti-slip coating |
| Loctite Big Foot Heavy Duty Pedestrian Grade | For heavy pedestrian or light rolling traffic |
| Loctite Big Foot Low Profile Pedestrian Grade - Safety Yellow | Two-component, self-sealing, non-slip, floor and deck coating |
| Loctite Big Foot Metal Primer | Two-component, epoxy-polymide, metal primer |
| Loctite Big Foot Vehicular Grade | Withstands heaviest rolling traffic and resists harsh liquids |
| Loctite Big Foot Water Based Primer/Sealer | Specially formulated to increase adhesion and coverage of anti-slip coatings |
| Loctite Big Foot Zero V.O.C. | 100% reactive, solvent free epoxy for use in odor-sensitive spaces |
| Loctite Black Contact Adhesive | Professional, solvent-based adhesive with neoprene that blends in with black-colored fabrics, rubbers, weatherstripping, and other porous materials. |
| Loctite Black Weatherstrip Adhesive (Automotive Aftermarket Only) | Professional, black contact adhesive, for weatherstripping and general purpose bonding |
| Loctite Blue Threadlocker 242 (Automotive Aftermarket Only) | Medium strength blue threadlocker. |
| Loctite Blue Threadlocker 243 (Automotive Aftermarket Only) | Designed for the locking and sealing of threaded fasteners between 1/4" and 3/4" (6 to 20 mm), which require normal disassembly with standard hand tools; surface insensitive. |
| Loctite Blue Threadlocker Stick - Medium Strength (Automotive Aftermarket Only) | Medium strength threadlocker semi-solid stick. |
| Loctite C-200 High Temperature Solid Film Lubricant | Solid film protection for engine parts, bearings, and servo-mechanisms |
| Loctite C5-A Copper Anti-Seize | Protects metal parts from rust, corrosion, galling, and seizing |
| Loctite Chisel Paint Stripper | Removes gaskets from any type of assembly in 10 to 15 minutes |
| Loctite Clover Reel Sharpening Compound | Paste for fast metal removal, biodegradeable. |
| Loctite Clover Silicon Carbide Grease Mix | Standard abrasive paste for fast metal removal |
| Loctite Clover Silicon Carbide Pat Gel Water Mix | Water mix paste, for fast metal removal. Biodegradeable. |
| Loctite Cold Galvanizing Compound | Highly resistant to salt corrosion and water, not resistant to acid or alkaline solutions. |
| Loctite Color Guard Coating | Solvent based, durable, flexible, rubber-like protective coating. |
| Loctite Color Guard Primer | Loctite® Color Guard® surface pretreatment |
| Loctite Color Guard Thinner | Color guard thinner for rubber coating |
| Loctite Contact Adhesive | Professional contact adhesive for weatherstripping and general purpose bonding. |
| Loctite Copper Anti-Seize Lubricant (Automotive Aftermarket Only) | Premium quality copper anti-seize and thread lubricant. |
| Loctite Copper Anti-Seize Stick | Copper based anti-seize in a semi-solid stick |
| Loctite Copper Anti-Seize Stick (Automotive Aftermarket Only) | Copper based anti-seize in a semi-solid stick |
| Loctite Copper Gasket Adhesive | Fast drying, metallic copper sealant, improved heat transfer, fills surface imperfections, repositionable - Top Pick |
| Loctite D609 Hysol Epoxy Adhesive | Fast setting, clear, medium viscosity, electrically insulative, chemical resistant epoxy multiple surface structural adhesive |
| Loctite Dielectric Grease | Provides moisture proof barrier with a high dielectric strength. |
| Loctite Dielectric Tune-Up Grease | Provides moisture proof barrier with a high dielectric strength. |
| Loctite Dielectric Tune-Up Grease (Automotive Aftermarket Only) | Provides moisture proof barrier with a high dielectric strength. |
| Loctite Disc Brake Quiet Stick (Automotive Aftermarket Only) | Specially formulated to dampen brake pad vibrations and eliminate associated squeaking and noise. |
| Loctite E 359 | High Temp. Resistance, High Strength, Low Off Gas |
| Loctite E-00CL Hysol Epoxy Structural Adhesive, Low Odor | Fast setting, flowable, low odor, clear, low viscosity epoxy multiple surface structural adhesive |
| Loctite E-00NS Hysol Epoxy Structural Adhesive, Non-Sag | Fast setting, controlled flow, non-sag, low odor, translucent epoxy multiple surface structural adhesive |
| Loctite E-04SS Epoxy Adhesive | Seam sealing epoxy adhesive |
| Loctite E-05CL Hysol Epoxy Structural Adhesive, Toughened | Fast setting, toughened, high peel, clear, low viscosity, low odor epoxy multiple surface structural adhesive |
| Loctite E-05MR Hysol Epoxy Structural Adhesive | Clear, two-component, fast room temperature curing epoxy multiple surface structural adhesive. |
| Loctite E-119HP Hysol Epoxy Structural Adhesive | A one-component, heat cure epoxy structural adhesive |
| Loctite E-120HP Hysol Epoxy Adhesive, Ultra Strength | High performance, ultra-strength, non-sag, aerospace grade epoxy with a 120 minute working life |
| Loctite E-20HP Hysol Epoxy Structural Adhesive, Fast Setting | High performance, ultra-strength, non-sag, aerospace grade epoxy multiple surface structural adhesive with a 20 minute working life |
| Loctite E-20NS Hysol Epoxy Structural Adhesive | High temperature, non-sag, high peel, high shear, 20 minute working life, metal bonder |
| Loctite E-214HP Hysol Epoxy Structural Adhesive, High Strength | One-part, heat cure, high temperature resistant, non-sag, grey epoxy |
| Loctite E-220IC Hysol Epoxy Structural Adhesive | A single-component, acid-free, epoxy adhesive designed for induction cure operations. |
| Loctite E-30CL Hysol Epoxy Structural Adhesive, Glass Bonder | General purpose, low viscosity, impact resistant, ultra clear glass bonder, multiple surface structural adhesive, 30 minute working life |
| Loctite E-30UT Hysol Epoxy Structural Adhesive | A two-component room temperature curing epoxy, multiple surface structural adhesive |
| Loctite E-40EXP Hysol Epoxy Potting Compound | Epoxy potting compound designed to comply with UL-674 requirements for explosion-proof electric motors. |
| Loctite E-40FL Hysol Epoxy Structural Adhesive | General purpose, flexible, impact resistant, grey epoxy, multiple surface structural adhesive with a 40 minute working life |
| Loctite E-40HT Hysol Epoxy Structural Adhesive | Two-component toughened, multiple surface structural adhesive |
| Loctite E-50CR Hysol Epoxy Structural Adhesive | A flowable, two-component, extended room temperature curing epoxy, multiple surface structural adhesive |
| Loctite E-60HP Hysol Epoxy Structural Adhesive, Toughened | High strength, toughened, high peel, high shear, off-white epoxy, multiple surface structural adhesive with a 60 minute working life |
| Loctite E-60NC Hysol Epoxy Structural Adhesive, Electrically Non-Corrosive | General purpose, electrically non-corrosive, potting compound, low viscosity epoxy, multiple surface structural adhesive with a 60 minute working life |
| Loctite E-7570 Epoxy Structural Adhesive | A one-component, heat cure epoxy, multiple surface structural adhesive |
| Loctite E-90FL Hysol Epoxy Structural Adhesive, Flexible | General purpose, flexible, impact resistant, grey, medium viscosity, multiple surface structural adhesive with an extended 90-minute working life |
| Loctite E-910 Epoxy Adhesive | One-component, heat-cure epoxy |
| LOCTITE ECCOBOND COB UV8801 | LOCTITE ECCOBOND COB UV8801 one component epoxy encapsulant is developed to meet high temperature thermal cycling specifications. |
| LOCTITE ECCOBOND DP1000 wirebond encapsulant | LOCTITE ECCOBOND DP1000 wirebond encapsulant. |
| LOCTITE ECCOBOND DP1005 jet dispensable die attach adhesive. | LOCTITE ECCOBOND DP1005 jet dispensable die attach adhesive. |
| LOCTITE ECCOBOND UF 2800A reworkable underfill | LOCTITE ECCOBOND UF 2800A reworkable underfill. AVAILABLE FOR PURCHASE AND USE IN CHINA ONLY. |
| LOCTITE ECCOBOND UF 2800B reworkable underfill | LOCTITE ECCOBOND UF 2800B reworkable underfill. ONLY AVAILABLE FOR PURCHASE AND USE IN CHINA |
| LOCTITE ECCOBOND UF 8840 epoxy underfill | LOCTITE ECCOBOND UF 8840 liquid epoxy underfill encapsulant is designed for flip chip BGA applications requiring improved crack/fracture resistance and low warpage. |
| LOCTITE ECCOBOND UV9060F UV Cure Encapsulant | LOCTITE ECCOBOND UV9060F no flow, UV cure encapsulant. |
| Loctite Econostrate | Loctite Econostrate is a low cost electrically isolating phase change thermal interface material. |
| Loctite Electrical Contact & Parts Cleaner | Fast-evaporating, no CFCs or HCFCs. |
| Loctite EMI-strate | Loctite EMI-strate has a unique combination of thermal and EMI management. Excellent choice for radiated EMI control. |
| Loctite Extend Rust Treatment | One-step rust treatment. Destroys old rust and prevents new rust. |
| Loctite Extend Rust Treatment (Automotive Aftermarket Only) | One-step rust treatment. Destroys old rust and prevents new rust. |
| Loctite Extreme Pressure Grease | Extreme pressure, resists water washout, maintains pumpability at low temperatures |
| Loctite Fixmaster 2000° Putty | Fluid, self-leveling aluminum liquid. |
| Loctite Fixmaster 4 Minute Epoxy | Cartridge-based, general purpose, two-part epoxy. |
| Loctite Fixmaster Activator | For Magna-Crete and Magna-Grout |
| Loctite Fixmaster Aluminum Liquid | Aluminum liquid which sets in 20 minutes. |
| Loctite Fixmaster Aluminum Putty | Aluminum filled putty. |
| Loctite Fixmaster Anchor Bolt Grout HP | High performance chemical anchor bolt grout |
| Loctite Fixmaster Concrete Repair Epoxy | Permanent, concrete repair in a convenient stick. |
| Loctite Fixmaster Crack Filler | Two-component, 100% solids, no solvents, crack filler. |
| Loctite Fixmaster Crack Filler NS | Caulking gun grade epoxy concrete crack repair. |
| Loctite Fixmaster Crack Filler SL | Self-leveling, 100% solid, low viscosity, flexible crack filler system |
| Loctite Fixmaster Deep Pour Grout | Grout, aggregate-filled, up to 6" deep. |
| Loctite Fixmaster Etching Agent | Etching agent for conveyor belt repair |
| Loctite Fixmaster Fast Set Grout | Grout, self-leveling, non-shrinking, up to 1" deep. |
| Loctite Fixmaster Fast Set Steel Epoxy | Fast set, cartridge-based, steel-filled, fast, cost effective epoxy. |
| Loctite Fixmaster Fast Set Steel Putty | Fast setting steel putty. Sets in 3 minutes. |
| Loctite Fixmaster Flex 80 Liquid | Castable, two-part urethane for making molds. |
| Loctite Fixmaster Flex 80 Putty | Trowelable, two-part, general purpose putty. |
| Loctite Fixmaster Flex Cleaner | Single component putty. |
| Loctite Fixmaster Flex Conveyor Belt Repair Kit | For long lasting belt repairs |
| Loctite Fixmaster Flex Metal Primer | Metal primer for use with urethane belt repair products |
| Loctite Fixmaster Flexible Joint Sealant | Two-component, urethane based, joint sealant. 100% solids and contains no solvents. |
| Loctite Fixmaster Floor Fill | Trowelable, for repairing and resurfacing cracks in concrete floors. |
| Loctite Fixmaster High Performance Epoxy | Exceptional shock resistance and outstanding tensile strength |
| Loctite Fixmaster High Performance Quartz | Recommended for restoring and protecting old concrete |
| Loctite Fixmaster High Solids Floor Coating Primer | Clear high solids, fast curing, penetrating primer |
| Loctite Fixmaster High Solids Novolac Epoxy | Resin for self leveling epoxy topcoat. |
| Loctite Fixmaster Instant Belt Repair | Single-component, heat-curing, temporary belt repair. |
| Loctite Fixmaster Magna-Crete | Two-component, rapid setting concrete repair and grouting system. |
| Loctite Fixmaster Magna-Grout | Concrete repair and grouting system |
| Loctite Fixmaster Marine Chocking | Self-leveling, fast curing, non-shrinking grout |
| Loctite Fixmaster Metal Magic Steel | Steel epoxy in stick form |
| Loctite Fixmaster Poxy Pak, Fast Cure Epoxy | Fast cure epoxy, general purpose |
| Loctite Fixmaster Rapid Rubber Repair | Premium quality, belt repair |
| Loctite Fixmaster Self Leveling Flooring Epoxy | Self leveling epoxy topcoat. |
| Loctite Fixmaster Self Leveling Flooring Epoxy, Hardener | Hardener for self leveling epoxy topcoat. |
| Loctite Fixmaster Self Leveling Flooring Epoxy, High Build Additive | High Build Additive for self leveling epoxy topcoat. |
| Loctite Fixmaster Self Leveling Flooring Epoxy, Resin | Resin for self leveling epoxy topcoat. |
| Loctite Fixmaster Stainless Steel Putty | Stainless steel filled steel putty |
| Loctite Fixmaster Steel Liquid | Pourable, self-leveling, steel liquid epoxy |
| Loctite Fixmaster Steel Putty | Non-slumping, two-part, steel-filled putty |
| Loctite Fixmaster Super Grout | Aggregate-filled, up to 18" deep, self-leveling grout |
| Loctite Fixmaster Superior Metal | Non-rusting, ferro-silicone-filled epoxy |
| Loctite Fixmaster Superior Performance Urethane Floor Coating | Urethane topcoat. |
| Loctite Fixmaster Superior Performance Urethane Floor Coating, Anti-Slip Additive | Anti-slip additive for urethane topcoat. |
| Loctite Fixmaster Superior Performance Urethane Floor Coating, Line Striping | Line striping for urethane topcoat. |
| Loctite Fixmaster Underwater Repair Epoxy | Underwater repair epoxy; ideal for plumbing, irrigation and marine applications |
| Loctite Fixmaster Water Based Epoxy Primer/Sealer | Primer for self leveling epoxy topcoat. |
| Loctite Fixmaster Water Based Epoxy Primer/Sealer, Hardener | Primer for self leveling epoxy topcoat. |
| Loctite Fixmaster Water Based Epoxy Primer/Sealer, Resin | Primer for self leveling epoxy topcoat. |
| Loctite Fixmaster Wear-Resistant Putty | Ceramic fibers, trowelable, excellent wear and abrasion resistant |
| Loctite Fixmaster Wet Surface Repair Putty | Trowelable, to repair wet/underwater surfaces |
| Loctite Flexseal 5100 Porosity Sealant | Self-curing, electrical grade anaerobic sealant that cures to form a tough, flexible, thermoset plastic with excellent environmental resistance. |
| Loctite Food Grade Anti-Seize | Food grade, anti-seizing and galling compound |
| Loctite Food Grade Grease | Extreme pressure, protects after flushout and steam cleaning |
| Loctite Form-A-Thread Stripped Thread Repair | Reliable repairs without drills, taps, tools, or inserts |
| Loctite Freeze & Release | Freeze action penetrating oil. |
| Loctite Frekote PU7000 | Polyurethane Release Agent |
| Loctite Frekote PU7001 | Polyurethane Release Agent |
| Loctite Frekote PU7200 | Polyurethane Sealer |
| Loctite Gasket Maker 515 - Flange Sealant (Automotive Aftermarket Only) | Flexible flange sealant for use on rigid machined flanges. |
| Loctite Gasket Maker 518 - Flange Sealant (Automotive Aftermarket Only) | Medium strength, flexible flange sealant. |
| Loctite Gasket Maker Stick - Flange Sealant (Automotive Aftermarket Only) | Flexible, solvent-resistant seal that will not tear or decay |
| Loctite Gasket Sealant 1 | Extended gasket life, fast drying, rigid cure, solvent based - Top Pick |
| Loctite Gasket Sealant 2 | Extended gasket life, slow drying, flexible cure, reliable, paste-like sealant, dressing, coating - Top Pick |
| Loctite Gear Chain and Cable Lubricant | Lubricant that protects and prolongs the life of gears, chains, wire, rope, and cable |
| Loctite Graphite-50 Anti-Seize | Metal-free, electrically conductive lubricant |
| Loctite Green Threadlocker 290 (Automotive Aftermarket Only) | Medium to high-strength, wicking grade threadlocker. |
| Loctite H3000 Speedbonder Structural Adhesive, General Purpose | General purpose, low viscosity, medium fixture time, multiple substrates, acrylic adhesive. |
| Loctite H3101 Speedbonder Structural Adhesive | General purpose, medium viscosity, extended fixture time, multiple substrates, acrylic structural adhesive |
| Loctite H3151 Speedbonder Structural Adhesive, Metal Bonder | Metal bonder, medium viscosity, medium fixture time, two-part acrylic |
| Loctite H3300 Speedbonder Structural Adhesive | General purpose, high viscosity adhesive, fast fixturing, non-sag, multiple substrates, acrylic structural adhesive |
| Loctite H4000 Speedbonder Structural Adhesive | Plastic/composite bonder with a medium fixture time acrylic structural adhesive |
| Loctite H4100 Speedbonder Structural Adhesive, Ultra Fast | Plastic/composite bonder with an ultra-fast fixturing acrylic structural adhesive |
| Loctite H4200 Speedbonder Structural Adhesive, Toughened | Plastic/composite bonder with an ultra-fast fixturing acrylic structural adhesive |
| Loctite H4500 Speedbonder Structural Adhesive, Metal Bonder | Two-part acrylic metal bonder, low viscosity, with a fast fixture time |
| Loctite H4710 Speedbonder Structural Adhesive | Acrylic thixotropic, two-component, room temperature curing structural adhesive, corrosion resistant |
| Loctite H4720 Speedbonder Structural Adhesive | Acrylic metal bonder, high viscosity, extended fixture time, with superior strength in corrosive environments |
| Loctite H4800 Speedbonder Structural Adhesive, Toughened | Acrylic plastic/composite bonder, extended fixture time, toughened |
| Loctite H5004 Speedbonder Structural Adhesive | A low odor, low viscosity acrylic structural adhesive |
| Loctite H6051 Speedbonder Structural Adhesive | A white UV resistant acrylic structural adhesive ideal for bonding gel-coated surfaces |
| Loctite H8000 Speedbonder Structural Adhesive, Fast Fixture | Acrylic, high toughness, aluminum bonder, with a medium fixture time |
| Loctite H8010 Speedbonder Structural Adhesive | Two-part acrylic, non-sag, two-component, room temperature curing adhesive. |
| Loctite H8100 Speedbonder Structural Adhesive | Two-part acrylic metal bonder, low viscosity, with a fast fixture time |
| Loctite H8110 Speedbonder Structural Adhesive | Two-part acrylic structural metal bonder especially for aluminum |
| Loctite H8500 Speedbonder Structural Adhesive | Two-part acrylic, high toughness, steel bonder, with a medium fixture time |
| Loctite H8510 Speedbonder Structural Adhesive | Two-part acrylic structural adhesive offers superior peel and impact strength on steel and aluminum. |
| Loctite H8600 Speedbonder Structural Adhesive | Acrylic high performance, galvanized steel bonder, with an extended fixture time |
| Loctite H8610 Speedbonder Structural Adhesive | A fast curing, two-part acrylic designed for bonding galvanized steel, galvaneal, and galvaloom. |
| Loctite H8700 Speedbonder Structural Adhesive | A weld-through capable, toughened, two-component acrylic adhesive designed for weld / rivet reduction. |
| Loctite Head Bolt & Water Jacket Sealant | Single-component, general purpose, anaerobic hybrid |
| Loctite Heavy Duty Anti-Seize | Excellent lubricity, metal-free |
| Loctite Heavy-Duty Rubberized Undercoating | Rubberized undercoating seals, protects, and insulates |
| Loctite HF6005 | Halogen free structural 2-part polyurethane adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Unique blend of properties to meet aesthetic requirements for surfaces while meeting demanding performance requirements. |
| Loctite HF8000R | Halogen free structural 2-part acrylic adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Excellent adhesion & long term durability in humid aging. |
| Loctite HF8075LV | Halogen free structural 2-part acrylic adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Fast fixture response to elevated temperatures (>60°C). |
| Loctite HF8150R | Halogen free structural 2-part acrylic adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Fast fixture response to elevated temperatures (60°C) and excellent long term durability to humid aging. |
| Loctite HF8600 | Halogen free structural 2-part acrylic adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Excellent dispensibility for narrow bondlines. |
| Loctite HF8800 | Halogen free structural 2-part acrylic adhesive designed for use in hand held devices like mobile phones, tablets, & laptops. Excellent dispensibility for narrow bondlines. Long on part open time. |
| Loctite Hi-Tack Gasket Sealant | Liquid sealant, holds gaskets in place during assembly, prevents seizing, corrects gasket alignment, easy disassembly - Top Pick |
| Loctite Hi-Tack Stick - Gasket Dressing (Automotive Aftermarket Only) | Wax-like stick gasket dressing has low odor and is solvent-free |
| Loctite Hi-Temp RTV Silicone Red - Sensor-Safe (Automotive Aftermarket Only) | One part RTV cure silicone is formulated for high temperature resistance and is for oxygen sensor equipped engines |
| Loctite High Flex Gasket Maker | Flexible form-in-place, high temperature gasket maker. |
| Loctite High Temperature Gasket Maker | Slow-setting, non-hardening, high-temperature sealant - Top Pick |
| Loctite HVAC Blue Pipe Joint Compound | Tough, pliable, solvent based thread sealant specially formulated for heating, air conditioning, and refrigeration - Top Pick |
| Loctite Hydraulic Jack Oil | Non-corrosive, hydraulic jack oil, improves lubrication |
| Loctite Hysol 6009S Hot Melt | An amorphous polypropylene, low viscosity, high heat resistant adhesive |
| Loctite Hysol CoolMelt Hot Melt Adhesive | A flexible material applied at low temperatures. |
| LOCTITE HYSOL EE0182 EB0625 | LOCTITE HYSOL EE0182 EB6025 is a two part, white epoxy casting system having low abrasion and rapid gel features. |
| Loctite Hysol QuickPac Hot Melt Adhesive | High performance, polyamide hot melt |
| Loctite Hysol SuperPac Hot Melt Adhesive | A medium setting material with a 30-second open time. |
| Loctite Industrial Hand Wipes | Pre-moistened, powerful citrus-scented cleaning hand wipes |
| Loctite Industrial Strength Paint Stripper | Industrial strength paint stripper quickly strips and removes paint, eliminating sanding and scraping |
| Loctite Instant Gasket | One part RTV cure silicone is formulated for high performance, leakproof, and fast gasketing, non-corrosive - Top Pick |
| Loctite Insulating & Sealing Wrap | A non-sticky, self fusing, multipurpose wrap |
| Loctite Isostrate | Loctite Isostrate 2000 is an industry standard electrically insulating phase change material. |
| LOCTITE ISOSTRATE 2000 | LOCTITE ISOSTRATE 2000 electrically conductive isolating phase change thermal interface material. |
| Loctite Klean 'N Prime Anaerobic Activator (Automotive Aftermarket Only) | A solvent based primer that features very long on-part life. |
| Loctite Letter Grade A (088) Wicking Grade High Strength Threadlocker | Used to lock and seal fine threaded nuts,bolts and studs in a wide variety of applications. |
| Loctite Letter Grade AA (089) Wicking Grade High Strength Threadlocker | Used to seal porosity in welds, castings, and powdered metal parts. |
| Loctite Letter Grade AV (087) High Strength Threadlocker | Used to lock and seal large coarse threaded nuts, bolts and studs in a wide variety of applications, high locking strength is required. |
| Loctite Letter Grade AVV (086) High Strength Threadlocker | Used to lock and seal large coarse threaded nuts, bolts and studs in a wide variety of applications, high locking strength required. |
| Loctite Letter Grade B (085) Medium Strength Threadlocker | Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications, removable with tools. |
| Loctite Letter Grade C (084) Medium Strength Threadlocker | Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications, removable with tools. |
| Loctite Letter Grade CV (083) Medium Strength Threadlocker | Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications, removable with tools. |
| Loctite Letter Grade D (081) High Strength Threadlocker | Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications requiring high strength. |
| Loctite Letter Grade E (080) Wicking Grade Low Strength Threadlocker | Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications requiring easy removal or adjustment. |
| Loctite Letter Grade EV (079) Low Strength Threadlocker | Used to lock and seal nuts, bolts, and studs in a wide variety of applications, removable with tools. |
| Loctite Letter Grade H (078) Wicking Grade Low Strength Threadlocker | Used to lock and seal fine threaded studs in a wide variety of applications where very low locking strength is required. |
| Loctite Letter Grade HV (077) Low Strength Threadlocker | Used to lock and seal nuts, bolts, and studs in a wide variety of applications, removable with tools. |
| Loctite Letter Grade HVV (571) | For the locking and sealing of metal tapered threads and fittings. |
| LOCTITE LIOFOL CS 22-861US1 | Cold Seal adhesive |
| LOCTITE LIOFOL LA 5026-21 | Curative for UR2790-22 |
| LOCTITE LIOFOL LA 6016-22 | Curative for LA7773-21 |
| LOCTITE LIOFOL LA 7724-21 | Laminating adhesive |
| LOCTITE LIOFOL LA 7773-21 | Laminating adhesive |
| Loctite LocWeld Epoxy Bonding Compound (Automotive Aftermarket Only) | 15-minute, two-part adhesive and filler system, eliminates the need for welding or brazing |
| Loctite LV Core Plug Sealant | An anaerobic sealant specifically designed for sealing and retaining engine cup plugs. |
| Loctite M-06FL HYSOL Urethane Adhesive | LOCTITE® Hysol® Product M-06FL is a medium-viscosity, urethane adhesive. |
| Loctite M-11FL Hysol Medical Device Urethane Adhesive | Medical device adhesive, low viscosity, flexible, 10 minute working life, ISO 10993 compliant |
| Loctite M-121HP Hysol Medical Device Epoxy Adhesive | Medical device adhesive, high viscosity, non-sag, high impact resistance, high peel strength, extended working life, ISO 10993 compliant |
| Loctite M-21HP Hysol Medical Device Epoxy Adhesive | Medical device adhesive, toughened, high peel resistance, high shear strength, 20 minute working life, ISO 109993 compliant |
| Loctite M-31CL Hysol Medical Device Adhesive | Medical device adhesive, low viscosity, ultra clear with 30 minute working time, ISO10993 compliant |
| Loctite Maintain Lubricant Penetrant | Spray-on rust preventer, unfreezes rusted parts |
| Loctite Maintenance Tacklebox | Tacklebox designed to fit in mechanics tool chest |
| Loctite Manufacturing Reliability Toolbox | Toolbox containing 13 Loctite brand items and used during training |
| Loctite Marine Grade Anti-Seize | Marine grade anti-seize, metal-free, protects assemblies exposed to fresh and salt water |
| Loctite Maxi-Coat | Heavy-duty, long-term protection coating |
| Loctite Maximum Strength Headliner Adhesive | High strength, aerosol adhesive |
| Loctite Maximum Strength Headliner Adhesive (Automotive Aftermarket Only) | High strength, aerosol adhesive |
| Loctite MCM-strate | Loctite MCM-strate is an electrically isolating phase change thermal interface material suitable for use between a heat sink and a variety of heat dissipating components. |
| Loctite Metal Bonder | Off-white, two-component acrylic adhesive for metal |
| Loctite Moly Dry Film Lubricant | Dry film lubricant for sliding surfaces and slow moving parts |
| Loctite Moly Paste | Metal-free, very low friciton, lubricates press fits |
| Loctite Moly-50 Anti-Seize | Metal Free, general purpose thread lubricant |
| Loctite MS 5800 | Single component polyurethane sealant that bonds, seals and waterproofs up to 180˚F. |
| Loctite MS 930 Black | One part humidity moisture curing elastic sealant, silane modified polymer |
| Loctite Multi-Purpose Glass Cleaner | Fast-acting, professional strength, multi-purpose, glass cleaner |
| Loctite N-1000 High Purity Anti-Seize | Certified pure, copper-based, long-term, anti-sieze |
| Loctite N-5000 High Performance High Purity Anti-Seize | Loctite High Performance N-5000 High Purity Anti-Seize is a specially formulated nickel-based anti-seize lubricant, produced under 100% controlled conditions for the highest purity. |
| Loctite N-5000 High Purity Anti-Seize | Anti-seize lubricant, recommended for highly corrosive environments |
| Loctite N-7000 High Purity Anti-Seize | Metal free, high level of purity, excellent lubricity |
| Loctite Natural Blue Biodegradable Cleaner & Degreaser | All purpose, industrial strength, concentrated, biodegradable cleaner |
| Loctite Nickel Anti-Seize | Copper free, recommended for stainless steel and other metal fittings |
| Loctite No More Leaks Plastic Pipe Thread Sealant | Solvent based thread sealant seals plastic pipes and allows easy disassembly - Top Pick |
| Loctite Non-Chlorinated Parts Cleaner | Non-chlorinated parts cleaner, penetrates, dissolves, removes dirt and oil |
| Loctite Nonflammable Electrical Contact Cleaner | Dries residue-free in seconds |
| Loctite Nordbak Backing Material | A 100% solids epoxy compound, Loctite® Nordbak® Backing Material is formulated for backing wear plates in cone crushers and grinding mills operating under normal conditions. |
| Loctite Nordbak Brushable Ceramic - Grey | Corrosion-resistant, protects against turbulance, abrasion, and cavitation |
| Loctite Nordbak Brushable Ceramic - White | Corrosion-resistant, protects against turbulance, abrasion, and cavitation |
| Loctite Nordbak Castable Wearing Compound | For casting wear-resistant parts, pourable |
| Loctite Nordbak Ceramic Tile Adhesive | Wear tile adhesive, high strength |
| Loctite Nordbak Chemical Resistant Coating | Chemical resistant coating, smooth, glossy, low friction finish, highly chemical resistant |
| Loctite Nordbak Combo Bead Wearing Compound | Abrasion resistance of both large and small beads and silicone carbide, trowelable |
| Loctite Nordbak Fast Cure Pneu-Wear | Fast cure, trowelable wearing compound |
| Loctite Nordbak Fast Cure Wearing Compound | Fast cure, trowelable wearing compound |
| Loctite Nordbak High Impact Backing Material | A 100% solids epoxy system with elastomers for backing wear material in crushers and grinding mills. |
| Loctite Nordbak High Impact Wearing Compound | Rubber-modified, trowelable wearing compound |
| Loctite Nordbak High Temperature Brushable Ceramic | Protects against turbulance, abrasion, and cavitation |
| Loctite Nordbak High Temperature Pneu-Wear | Protects against fine particle abrasion and temperatures to 450°F |
| Loctite Nordbak High Temperature Wearing Compound | Resists sliding abrasion and temperatures to 450°F, trowelable |
| Loctite Nordbak Low Odor Wearing Compound | Large ceramic beads, fine silicone carbide, high performance, low odor |
| Loctite Nordbak Pneu-Wear | Small ceramic beads and silicone carbide, trowelable |
| Loctite Nordbak Sprayable Ceramic 7255 | Loctite® Nordbak® Sprayable Ceramic 7255™ sprayable ceramic is a solvent-free ceramic filled two part epoxy coating. |
| Loctite Nordbak Thin Mil Brushable Ceramic - Black | Corrosion-resistant, protects against turbulance, abrasion, and cavitation |
| Loctite Nordbak Thin Mil Brushable Ceramic - Blue | Corrosion-resistant, protects against turbulance, abrasion, and cavitation |
| Loctite Nordbak Thin Mil Brushable Ceramic - Grey | Corrosion-resistant, protects against turbulance, abrasion, and cavitation |
| Loctite Nordbak Ultra High Temperature Pneu-Wear | Protects against fine particle abrasion and temperatures to 550°F |
| Loctite Nordbak Ultra High Temperature Wearing Compound | Resists sliding abrasion and temperatures to 550°F, trowelable |
| Loctite Nordbak Wearing Compound | Large ceramic beads, fine silicone carbide, high performance |
| Loctite NSWC100 | Loctite NSWC100 is a non-silicone, water cleanable thermal compound. |
| Loctite O-Ring Kit | Kit makes custom o-rings on the spot |
| Loctite ODC-Free Cleaner & Degreaser | Non-aqueous, for cleaning surfaces to be bonded with adhesives |
| Loctite OM4101 | Medium viscosity and water based halogen free primer designed to improve adhesion in plastic overmolding processes used in hand held devices like mobile phones, tablets, & laptops. |
| Loctite OM4501 | Low viscosity and solvent based halogen free primer designed to improve adhesion in plastic overmolding processes used in hand held devices like mobile phones, tablets, & laptops. |
| Loctite OM8200 | Low viscosity and water based halogen free primer designed to improve adhesion in plastic overmolding processes used in hand held devices like mobile phones, tablets, & laptops. |
| Loctite P-2 Dri-Loc Activator | Preapplied threadlocker activator, small microcapsules, excellent for all size fasteners. |
| Loctite P-3 Dri-Loc Activator | Preapplied threadlocker activator, large microcapsules for fasteners M6 and larger. |
| Loctite Penetrating Oil | Penetrating oil, lubricates, displaces moisture |
| Loctite Pipe Joint Compound | High temperature, universal pipe and joint compound - Top Pick |
| Loctite Pipe Repair Kit | Temporary emergency pipe repair kit |
| Loctite Plastic Bonder | Off-white, two-component acrylic for plastic |
| Loctite PM 5120 Porosity Sealant | Powder metal sealant used for improving aesthetics when preceding a plating, painting, or coating operation. |
| Loctite PMS-10E Porosity Sealant | Self-curing anaerobic porosity sealant widely used for high volume OEM manufacturing operations such as automotive castings and powder metal parts, and fiber-reinforced composites. |
| Loctite PMS-50E Porosity Sealant | Tough and durable anaerobic sealant designed to provide superior solvent and temperature resistance in extremely demanding environments. Only product with E85 fuel approval. |
| Loctite Power Grab Industrial Construction Adhesive | Heavy duty, high strength, construction grade adhesive |
| Loctite Powerstrate 51 | Loctite Powerstrate 51 is a low thermal impedance suitable for a wide range of applications on bare die processors and other electronic devices. |
| Loctite Powerstrate Xtreme | Loctite Powerstrate Xtreme (PSX) is a reworkable unsupported film with superior thermal performance even at low pressure.Also available in other versions (PSX-D-LV, PSX-D, PSX-Pm, PSX-PE) |
| Loctite Pro Strength Degreaser | Degreaser quickly dissolves and removes, rinses off with water |
| Loctite Pro Strength Parts Cleaner | Parts cleaner aggresively penetrates, dissolves, removes oil and grease |
| Loctite Pro Strength Varnish Remover | Super jet spray, quick acting varnish remover |
| Loctite PST Thread Sealant Stick (Automotive Aftermarket Only) | Single component, semi-solid pipe sealant compound |
| Loctite PSX-D | Loctite PSX-D (Powerstrate Xtreme) is a repeatable phase change thermal interface material. Also available in other versions (PSX-D-LV, PSX-Pm, PSX-PE) |
| Loctite PSX-D-LV | Loctite PSX-D-LV (Powerstrate Xtreme) is a reworkable and repeatable phase change thermal interface material. (It is also available in other versions (PSX-D, PSX-Pm, PSX-PE) |
| Loctite PSX-PE | Loctite PSX-PE (Powerstrate Xtreme) is a phase change thermal interface material. |
| Loctite PSX-Pm | Loctite PSX-Pm (Medium Dry) (Powerstrate Xtreme) is a reworkable and repeatable phase change material. Also available other versions (PSX-D-LV, PSX-D, PSX-PE) |
| Loctite PTFE Thread Sealing Tape | Non-curing thread sealing tape replaces conventional pipe joint compound and hardening sealants and can be used on all pipe materials. |
| Loctite Purple Threadlocker 222 (Automotive Aftermarket Only) | Low strength, removable purple threadlocker for small fasteners. |
| Loctite Quick Gel Super Glue (Automotive Aftermarket Only) | Multi-purpose, high viscosity instant adhesive for automotive aftermaket repairs |
| Loctite Quick Metal 660 Retaining Compound, Press Fit Repair (Automotive Aftermarket Only) | A creamy, non-running adhesive/sealant |
| Loctite Quick Service Tool Kit | Tool kit that contains eight of the most common brand products |
| Loctite QuickStix 534 Hi-Tack Gasket Dressing | No mess, semi-solid, gasket dressing works with all types of gaskets - Top Pick |
| Loctite QuickStix 548 Gasket Eliminator | Semi-solid, ideal for on-the-spot gasket repairs |
| Loctite QuickStix 561 Thread Sealant | A single component, semisolid anaerobic pipe sealant compound - Top Pick |
| Loctite QuickStix 5671 PST Thread Sealant | Stainless steel and other metals thread sealant - Top Pick |
| Loctite QuickStix 668 High Temperature Retaining Compound | Revolutionary semi-solid formula, high temperature retaining compound |
| Loctite QuickStix C5-A Copper Anti-Seize | Copper based anti-seize in a semi-solid stick |
| Loctite QuickStix Heavy Duty Anti-Seize | Semi-solid stick, heavy duty anti-seize |
| Loctite QuickStix Silver Grade Anti-Seize | Silver grade anti-seize in a semi-solid stick |
| Loctite QuickTape 249 Medium Strength Blue Threadlocker | TOP PICK Medium strength, general purpose, blue threadlocker in tape form, Disassemble with hand tools. |
| Loctite QuickTite Instant Adhesive Gel | High viscosity instant adhesive, one part, surface insensitive, room temperature cure. |
| Loctite QuickTite Super Glue Gel - Instant Adhesive (Automotive Aftermarket Only) | Multi-purpose, high viscosity instant adhesive for automotive aftermaket repairs |
| Loctite QuickTite Super Glue Liquid - Instant Adhesive (Automotive Aftermarket Only) | Multi-purpose liquid instant adhesive for automotive aftermaket repairs |
| Loctite Ready Gasket - Gasket Maker (Automotive Aftermarket Only) | One part RTV cure silicone is formulated for high performance, leakproof gaskets in one minute, blowout resistant, sensor-safe |
| Loctite Rear Window Defogger (Automotive Aftermarket Only) | Rear window defogger repair kit |
| Loctite Rearview Mirror Adhesive (Automotive Aftermarket Only) | Adhesive permanently remounts mirrors to windshields |
| Loctite Red Threadlocker 262 (Automotive Aftermarket Only) | Medium to high strength red threadlocker for large bolts & studs. |
| Loctite Red Threadlocker 271 (Automotive Aftermarket Only) | High strength red threadlocker for large bolts and studs. |
| Loctite Red Threadlocker 272 (Automotive Aftermarket Only) | High strength, fast curing, high temperature red threadlocker for large bolts & studs. |
| Loctite Red Threadlocker 277 (Automotive Aftermarket Only) | High strength red threadlocker for large bolts and studs. |
| Loctite Red Threadlocker Stick, High Strength (Automotive Aftermarket Only) | High strength, resistance to heavy shock, vibration, and stress levels. |
| Loctite Reliability Tacklebox | Tacklebox containing 14 Loctite brand products |
| Loctite Resinol 88C Porosity Sealant | Two component, low viscosity liquid porosity sealant that cures at elevated temperatures and is readily soluble in water for exceptional part cleanliness after the vacuum impregnation process. |
| Loctite Resinol 90C Porosity Sealant | Heat curing porosity sealant for small volume or intermittent users |
| Loctite Resinol 90R Porosity Sealant - 2 Component | Low viscosity heat cure sealant that is formulated with a chemistry that allows the material to be washed from the surface of the casting and later separated and reused in the process tank. |
| Loctite Resinol AT Porosity Sealant | High temperature and chemical resistant anaerobically curing porosity sealant |
| Loctite Resinol RTC Porosity Sealant | Low viscosity, anaerobic curing porosity sealant |
| Loctite RTV Silicone 587 - High Performance Blue (Automotive Aftermarket Only) | One part RTV cure silicone designed to be sensor-safe, low odor, non-corrosive. |
| Loctite RTV Silicone 5920 - High Performance Copper (Automotive Aftermarket Only) | One part RTV cure silicone for 4-cylinder, turbo-charged or high-performance engines. |
| Loctite RTV Silicone 598 - High Performance Black (Automotive Aftermarket Only) | One part RTV cure silicone for dealership warranty requirements, ensures extended drivetrain warranty compliance. |
| Loctite RTV Silicone Black - Adhesive/Sealant (Automotive Aftermarket Only) | One part RTV cure silicone is for general-purpose, RTV indoor/outdoor sealant, seals, bonds, repairs, mends. |
| Loctite RTV Silicone Blue - Gasket Maker (Automotive Aftermarket Only) | One part RTV cure silicone replaces any cut gasket. |
| Loctite RTV Silicone Clear - Adhesive/Sealant (Automotive Aftermarket Only) | One part RTV cure silicone is for general-purpose, RTV indoor/outdoor sealant, seals, bonds, repairs, mends. |
| Loctite SF 7900 Ceramic Shield for Welding | A ceramic dry film protective coating for MIG/MAG welding processes. Protects contact tips and welding nozzles by preventing adhesion of welding spatter. |
| Loctite SI 5640 | Fast cure 2K self leveling silicone potting adhesive. |
| Loctite Silicone Lubricant | Multi-purpose silicone lubricant |
| Loctite Silstrate | Loctite Silstrate is a comfortable silicone rubber pad offering high dielectric strength and excellent cut-through resistance. |
| Loctite Silver Grade Anti-Seize | Heavy duty anti-seize lubricant, temperature resistant, fortified with graphite and metallic flake |
| Loctite Silver Grade Anti-Seize Stick (Automotive Aftermarket Only) | Heavy duty anti-seize lubricant, temperature resistant, fortified with graphite and metallic flake |
| Loctite Silverstrate | Loctite Silverstrate has excellent thermal performance, particularly at higher pressures. Typically used on RF devices and SCR's where electrical conductivity is required (silver-filled). |
| Loctite Solventless Anaerobic Activator | Solvent-free activator for anaerobics. |
| Loctite Solvo-Rust Super Penetrating Oil | Super penetrating oil frees rusted parts and lubricates |
| Loctite SpeedSeal RTV Silicone Adhesive Sealant | Creates a tough, watertight, mildew resistant seal quickly |
| Loctite Stick Assortment Pack (Automotive Aftermarket Only) | Thread treatment stick assortment pack |
| Loctite STS Dri-Loc Threadlocker & Thread Sealant | Medium strength, preapplied threadlocker and thread sealant with excellent lubricity. |
| LOCTITE STYCAST SC 8001 B-Stageable, Electrically Insulating Epoxy Adhesive | LOCTITE STYCAST SC 8001 B-Stageable, Electrically Insulating Epoxy Adhesive |
| Loctite Summer Additive | For Magna-Crete and Magna-Grout |
| Loctite Super Glue (Automotive Aftermarket Only) | Multi-purpose liquid instant adhesive for automotive aftermaket repairs |
| Loctite Superflex Black RTV Silicone Adhesive Sealant | One part RTV silicone, general purpose, one-part, cures at room temperature. |
| Loctite Superflex Blue RTV Silicone Adhesive Sealant | Gasket maker replaces any cut gasket |
| Loctite Superflex Clear Non-Corrosive RTV Silicone Adhesive Sealant | One part RTV silicone neutral curing, non-corrosive. |
| Loctite Superflex Clear RTV Silicone Adhesive Sealant | One part RTV silicone, general purpose, one-part, cures at room temperature. |
| Loctite Superflex Construction Yellow RTV Silicone Adhesive / Sealant | Construction Yellow RTV Silicone Adhesive / Sealant |
| Loctite Superflex Equipment Green RTV Silicone Adhesive Sealant | Equipment Green RTV Silicone Adhesive Sealant |
| Loctite Superflex Red High Temp RTV Silicone Adhesive Sealant | One part RTV silicone, resists aging, weather, thermal cycling. |
| Loctite Superflex RTV Silicone Adhesive Sealant, Black (Automotive Aftermarket Only) | One part RTV cure silicone general-purpose, indoor/outdoor sealant, seals, bonds, repairs, mends. |
| Loctite Superflex RTV Silicone Adhesive Sealant, Blue (Automotive Aftermarket Only) | One part RTV silicone forms a tough, flexible rubber, reliable "formed-in-place." |
| Loctite Superflex RTV Silicone Adhesive Sealant, Clear (Automotive Aftermarket Only) | One part RTV silicone forms a tough, flexible rubber, reliable "formed-in-place." |
| Loctite Superflex White RTV Silicone Adhesive Sealant | One part RTV silicone, general purpose, one-part, cures at room temperature. |
| Loctite TG100 | Ultra high performance thermal grease |
| LOCTITE Thermstrate 2000 Phase Change | LOCTITE Thermstrate 2000 is a phase change thermal interface material suitable for use between a heat sink and a variety of heat dissipating components. |
| Loctite Thread Sealant 545 (Automotive Aftermarket Only) | High lubricating threadlocker for high pressure fluid power systems. |
| Loctite Thread Sealant for Oxygen Compatible Systems | A white paste for sealing threads in systems carrying oxygen - Top Pick |
| Loctite Thread Sealant with PTFE | Non-hardening, solvent based thread sealant with the added lubricity of PTFE for metal pipes - Top Pick |
| Loctite Thread Treatment Sticks Counter Display (Automotive Aftermarket Only) | Thread treatment sticks counter display |
| Loctite Tight Multipurpose Anaerobic Gel Threadlocker / Thread Sealant | Medium strength, general purpose gel adhesive. |
| Loctite Tile Bond Red, High Temp RTV Silicone Adhesive Sealant | High temperature RTV silicone adhesive sealant |
| Loctite Toolbox | Toolbox containing fifteen of the latest and best technological pieces |
| Loctite Trailer Jack Stand Grease | One product for all trailer and jack stand applications |
| Loctite U-05FL Hysol Urethane Structural Adhesive, High Strength | Fast setting, highly flexible, metal bonder, high strength |
| Loctite U-09FL Hysol Urethane Structural Adhesive, Highly Flexible | High performance, highly flexible, plastic bonder, high peel strength |
| Loctite U-09LV Hysol Urethane Structural Adhesive, Low Viscosity | Low viscosity, plastic and multiple surface bonder, high peel strength |
| Loctite UK 1351 B25 | Low Viscosity, structural polyurethane resin for hand lay-up. |
| Loctite UK 1366 B10 | Two-component epoxy-polyamide primer for increased adhesion to metal. |
| Loctite UK 1405 | Fast-curing, abrasion resistant putty for optimal production speed and durability with gap fill capabilities of up to 10mm. |
| Loctite UK 8370 B10 | Low viscosity, structural polyurethane resin for hand lay-up. |
| Loctite Under Pressure Pipe Repair Kit | Emergency pipe repair kit, repairs while pipes are under pressure, no tools or specially trained personnel |
| LOCTITE UR 8346 | Single component solvent-free moisture curable liquid polyurethane adhesive. |
| LOCTITE UR S110 | High strength, thermoset liquid -slowest cure |
| LOCTITE UR S111 | High strength, thermoset liquid -slow cure |
| LOCTITE UR 8345 | LOCTITE UR 8345 is a single component, solvent free, moisture curable, liquid polyurethane adhesive. It cures with water to form a tough, strong, and thermoset polymer. |
| LOCTITE UR 8345RD | LOCTITE UR 8345RD Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed. |
| Loctite Urethane Sealant | Urethane sealant; single component, gun-grade, bonds, seals, waterproofs (black) |
| LOCTITE US5533 flame retardant potting compound | LOCTITE US5533 flexible, flame retardant potting compound. |
| Loctite UV8000 | Photonics material UV cure |
| Loctite ViperLube Clear High Performance Synthetic Grease | Non-flammable, synthetic grease, lasts four times longer than petroleum-based lubricants (clear) |
| Loctite ViperLube High Performance Synthetic Grease | High performance synthetic grease; superior protection for equipment exposed to a wide range of conditions and operating temperatures |
| Loctite ViperLube High Performance Synthetic Lubricant Gear Oil - 90W | Loctite ViperLube High Performance Synthetic Lubricant Gear Oil - 90W extends equipment life and reduces oil changes and energy costs. Recommended for use on gear sets, bearings, circulating oil systems, chains and worn gear units. |
| Loctite ViperLube High Performance Synthetic Lubricant ISO-46 15 WT | |
| Loctite ViperLube High Performance Synthetic Lubricant ISO-460 140 WT | |
| Loctite ViperLube High Performance Synthetic Lubricant ISO-68 20 WT | |
| Loctite ViperLube High Performance Synthetic Lubricant Lightweight Oil - 10W | Reduces varnish and deposits, minimizing the need for replacement parts and maintenance |
| Loctite White Hi-Temp Anti-Seize | Non-metalic, general purpose, anti-sieze lubricant |
| Loctite White Lithium Grease | General purpose lubricating paste |
| Loctite Windshield Repair (Automotive Aftermarket Only) | One-component, windshield repair for use by car owner; requires no mixing or heat. |
| Loctite Winter Additive | For Magna-Crete and Magna-Grout |
| Loctite Yellow Weatherstrip Adhesive (Automotive Aftermarket Only) | Liquid contact cement for weatherstripping and general purpose bonding |
| Loctite Zinc Anti-Seize | Zinc anti-seize, protects aluminum and ferrous surfaces |
| LTC Plus | Pickle line rinse tank additive |
| Macromelt 2157 | Macromelt 2157 is a polyamide hot melt adhesive. |
| Macromelt 2692 | Macromelt 2692 is a thermoplastic hot melt adhesive based on polyamide. This product is specially designed for high heat resistance and good oil resistance. |
| Macromelt 6202 | Macromelt 6202 is a thermoplastic hot melt adhesive based on polyamide. |
| Macromelt 6206 | Macromelt 6206 is a moldable polyamide with excellent adhesion to tough substrates. |
| Macromelt 6211 | Good low temperature and adhesion properties |
| Macromelt 6238 | A versatile thermoplastic resin for bonding a variety of substrates. |
| Macromelt 6239 Hot Melt Adhesive | High performance, general purpose polyamide hot melt |
| Macromelt 6301 | A thermoplastic hot melt adhesive resin |
| Macromelt 9069 | Macromelt 9069 is a high melting thermoplastic hot melt adhesive based on polyamide. |
| Macromelt MM Q-5375 | Macromelt MM Q-5375 is a moldable polyolefin for demanding moisture and solvent resistance. Excellent adhesion to the most difficult substrates. |
| Macromelt MM6208S | Low pressure molding polyamide with good adhesion to plastics. |
| Macromelt OM 633 | Moldable polyamide with good adhesion to plastics and a service temperature up to 125°C such as in an automotive firewall |
| Macromelt OM 638 | Moldable polyamide with service temperature up to 125°C such as in an automotive firewall |
| Macromelt OM 641 | Moldable polyamide where strength and hardness are needed such as in memory sticks and computer connectors |
| Macromelt OM 646 | Macromelt OM 646 is a moldable polyamide where strength and increased hardness are needed such as in memory sticks and computer connectors. |
| Macromelt OM 652 | Macromelt OM652 is a moldable polyamide where excellent adhesion to plastics and cold temperature flexibility are important such as in an automotive exterior. |
| Macromelt OM 657 | Macromelt OM 657 is a moldable polyamide where excellent adhesion to plastics and cold temperature flexibility are important such as in an automotive exterior. |
| Macromelt OM 673 | Moldable polyamide with good adhesion for higher temperature applications such as in an automotive under-hood |
| Macromelt OM 678 | Macromelt OM 678 is a moldable polyamide with good adhesion and high temperature resistance for applications such as in an automotive under-hood. |
| Macromelt OM 682 | Macromelt OM682 is a moldable polyamide with high temperature resistance for the most demanding high humidity applications such as on the inside of automobile tires. |
| MACROMELT OM341 | MACROMELT OM341 is a high performance thermoplastic polyamide designed to offer blaze orange color for easy identification of components. It is typically used to encapsulate high voltage modules. |
| MACROMELT OM648 | Macromelt OM648 is designed for bonding of cylindrical fitting parts. Cures when confined in the absence of air between close fitting. |
| Macromelt TPX 16-192B | General purpose, high heat polyamide, hot melt |
| Macromelt TPX 16-206B | Long open time polyamide hot melt |
| Macromelt TPX16-2192 | A high melting polyamide hot melt adhesive |
| Macromelt® MM6208 | Low pressure molding |
| Macroplast UR-8331 | |
| Macroplast B 7663 | |
| Macroplast B 7663G | A flammable, synthetic, rubber-based adhesive formulated for bonding a variety of porous and non-porous surfaces. |
| Macroplast B QA3781 Polyurethane Resin | Solvent-based polyurethane lacquer |
| Macroplast EMC53-1 Polyurethane Resin | Moisture cure polyurethane, hard coating for wood and concrete |
| Macroplast MC40P Polyurethane Resin | Moisture cure polyurethane, hard coating for wood and concrete |
| Macroplast MC75 Polyurethane Resin | Moisture cure polyurethane, hard coating for wood and concrete |
| Macroplast QC4820 Polyurethane Resin | Solvent-based polyurethane lacquer |
| Macroplast QC4891 Polyurethane Resin | Solvent-based polyurethane lacquer |
| Macroplast SIA 111R2 | High strength, thermoset liquid -slow cure (red version) |
| Macroplast SIA 114 | High strength, thermoset liquid - medium cure |
| Macroplast SIA 115 | High strength, thermoset liquid - medium cure |
| Macroplast SIA-113SHV | High strength, thermoset liquid moisture cure adhesive. |
| Macroplast UK 072A | Macroplast UK 072A is a filled two component, room temperature curing, tough elastomeric urethane adhesive designed for bonding/sealing in a wide variety of air filter applications. |
| Macroplast UK 072B | Urethane filter adhesive. |
| Macroplast UK 1340 | A high viscosity, 2K structural adhesive for composite plastics bonding in wind blades. |
| Macroplast UK 178A | Two component polyurethane adhesive. Macroplast UK 178A with 178B is a 100% solids, room temperature curing polyurethane compound which cures to a tough, resilient adhesive. |
| Macroplast UK 178B | Two component polyurethane adhesive. Macroplast UK 178A with 178B is a 100% solids, room temperature curing polyurethane compound which cures to a tough, resilient adhesive. |
| Macroplast UK 180A | Two component polyurethane adhesive. |
| Macroplast UK 180B | |
| Macroplast UK 201A | Two component polyurethane adhesive. |
| Macroplast UK 231 | Macroplast® UK 231 ia a 100% solids, room temperature curing polyurethane compound which cures to a tough, resilient adhesive. This product offers an excellent balance of membrane penetration and holdout, resulting in excellent fiber tearing bonds between membranes. |
| Macroplast UK 413A | Urethane filter adhesive. |
| Macroplast UK 413B | Urethane filter adhesive. |
| Macroplast UK 5400 | For use on pretreated metals, synthetic materials, wood, and rigid foam |
| Macroplast UK 7815 | Room temperature curing foam compound |
| Macroplast UK 7816 | Room temperature curing foam compound |
| Macroplast UK 8103 | For use on pretreated metals, synthetic materials, wood, and rigid foam |
| Macroplast UR 8224S | High strength, thermoset liquid moisture cure adhesive. |
| Macroplast UR 8225 Slow | High strength, thermoset liquid moisture cure |
| Macroplast UR-8229L | High strength, thermoset liquid fast cure |
| Macroplast UR-8340 | Single component solvent-free moisture curable liquid polyurethane adhesive. |
| Macroplast UR-8340RD | Macroplast UR-8340RD, Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination. |
| Macroplast UR-8341 | Macroplast UR-8341 is a single component, solvent free, moisture curable, liquid polyurethane adhesive. It cures with water to form a tough, strong, and thermoset polymer. |
| Macroplast UR-8343 | Macroplast UR-8343 is a single component, solvent free, moisture curable, liquid polyurethane adhesive. It cures with water to form a tough, strong, and thermoset polymer. |
| Macroplast UR-8343RD | Macroplast UR-8343RD Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed. |
| Macroplast UR-8344 | Macroplast UR-8344 is a single component, solvent free, moisture curable, liquid polyurethane adhesive. It cures with water to form a tough, strong, and thermoset polymer. |
| Macroplast UR-8344RD | Macroplast UR-8344RD Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination. Medium cure speed |
| Macroplast UR-8346RD | Macroplast UR-8346RD Red colored, high strength, thermoset liquid moisture cure adhesive for panel lamination. Fast cure speed. |
| Minico M2000 RS MOD2 Series | ACHESON Minico M2000RS MOD2 are a series of one component screen printable resistive carbon inks. |
| Minico M4100 | Minico M4100 is a one component electroless nickel plateable, conductive polymer. |
| Miracure 97XU020 | Matte finish UV coating for in-line applications. |
| Miracure EB1036MID | Excellent slip stability and film clarity. |
| Miracure EB1179EH | Excellent gloss, abrasion resistance and mobility properties. |
| Miracure L9019E | Ultra Gloss UV coating for anilox, blanket, and screen coaters. |
| Miracure L9037E | Satin Finish UV coating for in or off-line applications. |
| Miracure L9048DB | High gloss UV coating for off-line high speed roller coaters. |
| Miracure L9048E | High gloss UV coating for off-line high speed anilox, blanket, and screen coaters. |
| Miracure L9048M | High gloss, UV coating |
| Miracure L9056E | Semi gloss finish UV coating for in or off-line applications. |
| Miracure L9091L / Primafix 30-37-3 | For integrated label applications. |
| Miracure L9091VT / Primafix 26-35-1 | For dry peel applications. |
| Miracure L9213S | UV curable metallic coating. |
| Miracure Silver UVS4004E | A silver UV curable coating that delivers a clean silver appearance and can be used as an alternative to silver metallic inks. |
| Miracure UV1135D | Multiwall bag UV coating, excellent slip stability and film clarity. |
| Miracure UVG1024C | High gloss, fast cure UV Coating for in-line applications. |
| Miracure UVM2020E | Matte finish UV coating for off-line applications. |
| MiraFoil UVS4032E | Metallic UV curable / printable foil replacement system. |
| MiraFoil UVS4077EC | UV curable and coatable / printable foil replacement system that delivers brillant metallic copper appearance to substrates. |
| MiraFoil UVS4078EG | UV curable and coatable / printable foil replacement system that delivers high brilliant metallic gold appearance to substrates. |
| Molydag 210 | Dry film lubricant |
| Molydag 254N | Resin Bonded MoS2 Lubricant Coating |
| Multan 2140 Metalworking Lubricant | A non-sulfonate soluble oil that has minimal impact in the presence of bioactivity. |
| Multan 2307GT Metalworking Lubricant | Oil-rejecting true solution synthetic fluid designed for machining, grinding and roll forming ferrous alloys. |
| Multan 3015 Metalworking Lubricant | Synthetic lubricant suitable for light machining to tube forming |
| Multan 3105 Metalworking Lubricant | High lubricity synthetic multi-metal coolant |
| Multan 3107 Metalworking Lubricant | True solution synthetic fluid designed for ferrous and most non-ferrous alloys. |
| Multan 400 | Synthetic metal removal and forming fluid |
| Multan 5005M | A heavy duty soluble oil used in metal removal applications. Its high level of extreme pressure additives make this product suitable for heavy machining operations including broaching. This product is fine for both ferrous and non-ferrous applications. |
| Multan 5500 Metalworking Lubricant | Synthetic coolant used on aviation materials |
| Multan 5600D Metalworking Lubricant | High lubricity soluble oil coolant for multi-metal applications |
| Multan 6011 Metalworking Lubricant | A soluble oil designed for machining and grinding ferrous alloys. |
| Multan 8304 Metalworking Lubricant | Oil-absorbing true solution synthetic fluid designed for machining and grinding ferrous and aluminum alloys. |
| Multan 9103 Metalworking Lubricant | No foam, synthetic grinding lubricant |
| Multan B 163 Metalworking Lubricant | A low oil, water soluble, semisynthetic fluid designed for light- to moderate-duty machining and grinding on both ferrous and non-ferrous alloys. |
| Multan B 200 | Bio-resistant semi-synthetic coolant |
| Multan B 236 Metalworking Lubricant | A semi-synthetic metal removal fluid for machining and grinding ferrous and non-ferrous alloys. |
| Multan B 400 | Bio-resistant multi-metal semi-synthetic coolant |
| Multan B 406 | Bio-resistant, non-DCHA, multi-metal semi-synthetic coolant |
| Multan B 414 Metalworking Lubricant | A semi-synthetic metal removal fluid for machining and grinding ferrous and non-ferrous alloys. |
| Multan B 451 | Bio-resistant high EP semi-synthetic coolant |
| Multan B-524 | Multan B-524 A low foam, water soluble, semi-synthetic fluid designed for machining and grinding ferrous and aluminum alloys. |
| Multan CR 10 Metalworking Lubricant | Medium viscosity oil for metal removal |
| Multan CR 20 Metalwqrking Lubricant | High viscosity oil for metal removal |
| Multan CR 26 Metalworking Lubricant | High viscosity oil with EP additive for metal removal |
| Multan CR 67 Metalworking Lubricant | Low viscosity oil for metal removal |
| Multan CR 67IC Metalworking Lubricant | Medium viscosity oil with EP additive for metal removal |
| Multan DFL 55 | Dry film metal forming fluid |
| Multan DFL 55 HS | Dry film lubricant suitable for extreme draws |
| Multan F 1009 Metalworking Lubricant | Synthetic lubricant suitable for extreme draws |
| Multan F 2004 Metalworking Lubricant | A synthetic compound designed for drawing and stamping of ferrous and aluminum alloys. |
| Multan F 2005 | Low viscosity, synthetic, heavy duty forming lubricant |
| Multan F 325 Metalworking Lubricant | A water soluble, biodegradable, synthetic lubricant. Contains no mineral oil, chlorine or sulfur. Excellent for use in tube mills or roll-forming lines running ferrous or non-ferrous materials. |
| Multan F 329 Metalworking Lubricant | A biodegradable, synthetic lubricant. Excellent for use in tube mills or roll-forming lines running ferrous or non-ferrous materials. Particularly suitable for galvanized and zinc-coated steel. |
| Multan F 6740 | A synthetic metal forming lubricant that is used on all metals. |
| Multan F 7160 | Light to moderate forming lubricant for all metals including copper |
| Multan F 7270 | Multan F 7270 is a synthetic compound designed for drawing and stamping of ferrous and aluminum alloys. |
| Multan F 737 Metalworking Lubricant | Non-VOC synthetic forming product |
| Multan F 738 | Synthetic stamping lubricant for medium draws |
| Multan F 747 | Synthetic stamping lubricant for deep draws |
| Multan F 750 Metalworking Lubricant | Synthetic forming lubricant with EP and polymer additives |
| Multan F 927 F Metalworking Lubricant | Heavy duty soluble forming lubricant with EP additives |
| Multan F 981ND | Metal forming soluble oil with EP package |
| Multan F 985 Metalworking Lubricant | A metal forming fluid suitable on steel, galvanized, aluminum and stainless applications. |
| Multan F B27 MC-1 | OEM approved multi-metal metal forming lubricant |
| Multan F B27 MC6A | OEM approved multi-metal metal forming lubricant |
| Multan F B27 MC6A-HD | OEM approved high solids multi-metal metal forming lubricant |
| Multan F B27 MH | OEM approved multi-metal metal forming lubricant |
| Multan F HPL | Hair pin bending lubricant for HVAC market |
| Multan FP 1212 | A paste designed for cold forging, forming, drawing, and bending of ferrous, stainless steel and non-ferrous alloys. |
| Multan Gear Mark 35W (270 Pent) | Pigmented lubricant for checking the alignment of matched gear sets |
| Multan Gear Mark 39SY201 (235 Pent) | Pigmented lubricant for checking the alignment of matched gear sets |
| Multan Gear Mark B201Y (340 Pent) | Pigmented lubricant for checking the alignment of matched gear sets |
| Multan PL 101 Metalworking Lubricant | Multiple OEM approved product for both forming and rust prevention |
| Multan PL 1439 Metalworking Lubricant | Low VOC; use with Appli-Coater for light stamping, high speed. |
| Multan PL 198 Metalworking Lubricant | High viscosity hydroforming die side lubricant. |
| Multan PL 298 Metalworking Lubricant | High viscosity hydroforming die side lubricant |
| Multan PL 633 Metalworking Lubricant | Solvent based forming and stamping lubricant for light applications |
| Multan PL Prelube MP-404 | Mill applied OEM approved drawing lubricant |
| Multicore 381 | Cored Wire |
| Multicore C400 Flux Cored Wire | MULTICORE C400 Flux Cored Wire Halide-free, no-clean, clear residue, increased flux content for improved wetting. |
| Multicore C502 Cored Wire | Solder materials -Cored Wire |
| Multicore C511 | MULTICORE C511 cored solder wire has been specially formulated to compliment no clean wave and reflow soldering processes. |
| MULTICORE CR32 | Multicore CR32 is a no clean, type L solder paste, It has been formulated as a modest residue level product for printing and reflow in air. CR32 solder pastes offer excellent open time and soldering activity with pale post-soldering residues. |
| MULTICORE CR37 solder paste | MULTICORE CR37 solder paste is suitable for most assembly processes. |
| Multicore DA100 Solder Paste | Multicore DA100 is a flux designed for solder die attach paste applications. |
| Multicore DA101 | Die attach solder paste |
| Multicore FluxPen Hydro-X20 | Multicore FluxPen Hydro-X20 is a controlled release, water wash, VOC Free, liquid flux and cleaner pen applicator. Range of compatible flux types available. |
| MULTICORE HF 108 | MULTICORE HF108 is a halogen-free, no clean, low voiding Pb-free solder paste development product. HF108 also shows excellent humidity resistance and solderability when reflowed in both air and nitrogen across a wide range of surface finishes including Immersion Ag and OSP copper. |
| Multicore HF200 | Multicore HF200 is a Halogen-free, no clean, low voiding Pb-free solder paste. |
| MULTICORE HF208 | MULTICORE HF208 is a halogen-free, no clean, low voiding Pb-free solder paste. It shows excellent humidity resistance and solderability when reflowed in both air and nitrogen across a wide range of surface finishes including OSP copper. |
| Multicore Hydro-X Flux Cored Wire | MULTICORE Hydro-X cored wire is a high activity, water washable flux with excellent wetting on difficult substrates. |
| Multicore Hydro-X20 High Activity Flux | Multicore Hydro-X20 is a high activity, water wash, VOC Free, liquid flux designed for the soldering of the most difficult electronic assemblies. |
| Multicore LF318 No-Clean Solder Paste: Lead-Free | Multicore LF318 solder paste is a halide-free, no clean lead free, pin testable solder paste. |
| Multicore LF318 No-Clean Solder Paste: Lead-Free | Multicore LF318 solder paste is a halide-free, no clean lead free, pin testable solder paste. |
| Multicore LF318 No-Clean Solder Paste: Lead-Free | Multicore LF318 solder paste is a halide-free, no clean lead free, pin testable solder paste. |
| Multicore LF318 No-Clean Solder Paste: Lead-Free (96SC AGS 88.5) | Multicore LF318 solder paste is a halide-free, no clean lead free, pin testable solder paste. |
| Multicore LF318 No-Clean Solder Paste: Lead-Free (97SC AGS 88.5) | Multicore LF318 solder paste is a halide-free, no clean lead free, pin testable solder paste. |
| Multicore LF318 No-Clean Solder Paste: Lead-Free (97SC AGS 88.5V) | Multicore LF318 solder paste is a halide-free, no clean lead free, pin testable solder paste. |
| Multicore LF318M No-Clean Solder Paste: Lead-Free | Multicore LF318M solder paste is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing. |
| Multicore LF318M No-Clean Solder Paste: Lead-Free (96SC AGS 88.5V) | Multicore LF318M solder paste is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing. |
| Multicore LF318M No-Clean Solder Paste: Lead-Free (96SC DAP 88.5V ) | Multicore LF318M solder paste is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing. |
| Multicore LF318M No-Clean Solder Paste: Lead-Free (97SC AGS 89V) | Multicore LF318M solder paste is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing. |
| Multicore LF318M No-Clean Solder Paste: Lead-Free (97SC AGS 88.5V) | Multicore LF318M solder paste is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing. |
| Multicore LF318M No-Clean Solder Paste: Lead-Free (97SC DAP 88.5V ) | Multicore LF318M solder paste is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing. |
| MULTICORE LF318M Ultra low voiding lead free solder paste | MULTICORE LF318M halide-free, no clean, low voiding Pb-free solder paste. |
| Multicore LF328 No-Clean Solder Paste: Lead-Free Ultra Low Voiding | Multicore LF328 is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing. |
| Multicore LF328 No-Clean Solder Paste: Lead-Free Ultra Low Voiding (96SC AGS 88.5) | MulticoreLF328 is a halide-free no-clean Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing. |
| Multicore LF328 No-Clean Solder Paste: Lead-Free Ultra Low Voiding (97SC DAP 88.5) | Multicore LF328 is a halide-free, no-clean, Pb-free solder paste that has excellent humidity resistance and a broad process window for both reflow and printing. |
| Multicore LF600 No-Clean Solder Paste: Lead-Free (97SC AGS 88.5V) | Multicore LF600 is a halide-free, no-clean, solder paste that exhibits excellent thermal stability. |
| Multicore LF600 No-Clean Solder Paste: Lead-Free (97SC DAP 88.5V) | Multicore LF600 is a halide-free, no-clean, solder paste that exhibits excellent thermal stability. |
| Multicore LF620 | Halide-free, no clean lead free, low voiding solder paste with excellent humidity resistance and broad process window. Suitable for both reflow and printing. |
| Multicore LF700 | A halide-free, no clean lead free solder paste with a broad process window for printing, reflow and humidity resistance. |
| Multicore LF721 | Multicore LF721 is a halide-free, no clean, low voiding Pb free solder paste. |
| MULTICORE LF721 RWF | MULTICORE LF721 RWF is a reworkable tacky flux designed for a wide range of electronics assembly and rework processes. It is recommended for rework processes in conjunction with MULTICORE LF721. |
| Multicore LF722 | Multicore LF722 is a halide-free, no clean, low voiding Pb-free solder paste. |
| Multicore LF730 | Halide-free, no clean, low voiding Pb-free solder paste, which has excellent humidity resistance and a broad process window both for printing and reflow. |
| MULTICORE LM100 no clean flux solder paste | MULTICORE LM100 no clean flux solder paste |
| Multicore MCF800 | Multicore MCF800 is designed for the effective removal of all types of soldering process residues from circuit boards, screens, fixtures and equipment. |
| MULTICORE MF200 | MULTICORE MF200 is a low residue liquid flux for lead-free wave soldering. |
| Multicore MF210 Liquid Flux | Multicore MF210 is a no clean, resin-free, halide-free liquid flux designed for surfaces with poor solderability. |
| Multicore MF300 VOC-Free: Clear Residue - Resin-Free - Lead-Free Compatible | Multicore MF300 is a no-clean, resin-free, halide-free, water-washable liquid flux designed to reduce the incidence of mid-pad solder balling. |
| MULTICORE MF388 No Clean Flux | MULTICORE MF388 sustained activity in high pre-heats for dual wave and lead-free processes. High PTH fill, low residues. High reliability. |
| MULTICORE MF390HR | MULTICORE MF390HR is an halogen free, no clean liquid flux. It is used in the automotive, consumer & industrial electronics and the defense & aerospace markets. |
| MULTICORE MFR301: IPA-Based Rosin Flux - Lead-Free Compatiable | MULTICORE MFR301 is a high activity, liquid, no clean flux for surfaces with poor solderability from the pioneers of no-clean technology. |
| MULTICORE MP200 | MULTICORE MP200 solder pastes have been formulated as no-clean, Sn/Pb solder paste for high speed printing and reflow in both air and nitrogen. It has been formulated to have increased reflow operating window. |
| Multicore MP218 No-Clean Solder Paste: High humidity and temperature resistance | MULTICORE MP218 solder paste is a halide-free, no clean tin lead, pin testable solder paste which has excellent humidity resistance and a broad process window both for reflow and printing. |
| Multicore NC-00 | Solder wicks |
| Multicore NC-AA | Solder wicks |
| Multicore NC-AB No Clean desoldering wick | MULTICORE NC-AB No clean desoldering wick. |
| Multicore NC-BB No Clean desoldering wick | Multicore NC-BB No Clean desoldering wick |
| Multicore SC01 | Multicore SC01 is designed for the stencil cleaning and hand cleaning of process soldering residues. A highly effective cleaner that dries rapidly (fast evaporation). |
| Multicore Spot-On | Multicore Spot-On is a temporary solder resistance designed to be used on printed circuit boards prior to soldering and will withstand fluxing and wave soldering operations. |
| Multicore TFN600 | Tacky flux used in hanheld devices |
| Multicore TFN700B | Newtonian tacky flux designed for PoP applications. |
| Multicore TFN800HF-BLUE | PoP tacky flux |
| Multicore TTC-LF Lead-Free Tip Tinner | Multicore TTC-LF is a handy, non-abrasive, solder iron tip tinner. Easily wets hot solder irons leaving a brightly tinned tip. |
| MULTICORE WS200 Water Wash Paste: Wide Process Window | MULTICORE WS200 is a high performance, water-washable solder paste. Residues are readily removed with DI water, without the need for a saponifier. It is available in Sn62 and Sn63 alloys. |
| MULTICORE WS300 Water Wash Paste: Lead Free | MULTICORE WS300 is a water washable solder paste specially formulated with fine-powder lead-free alloys. It is available with 96sc and 97sc SnAgCu alloys. |
| Multicore WS300 WS300 TACKY FLUX | Multicore WS300 is a water wash flux system specially formulated with fine-powder lead-free alloys. |
| Multicore WS300 WS300HV TACKY FLUX | Multicore WS300 is a water wash flux system specially formulated with fine-powder lead-free alloys. |
| Multicore X32-10I No Clean Flux | Multicore X32-10I No Clean Flux is a low solids synthetic resin liquid flux that meets global demand for ultra low residue medium activity tacky flux. |
| Multicore X33-08I No Clean Flux | Multicore X33-08I No Clean Flux has a balance between soldering performance and on-board reliability; does not have to be a compromise. |
| ND 190/4 | Reduced VOC primer |
| Optal 155A | Consumer packaging water based bottle labeling adhesive |
| Optal 200A | Better adhesion and flexibility in the cold |
| Optal 3667 | Consumer packaging bottle labeling adhesive for plastic containers. Formulated resin based adhesive. |
| Optal 4079 | Consumer packaging jelly gum bottle labeling adhesive |
| Optal 4106 | Consumer packaging jelly gum bottle labeling adhesive |
| Optal 421A | Consumer packaging adhesive for bottle labeling. Exceptional ice-proof properties. |
| Optal 7006 | Consumer packaging adhesive, glass low to moderate coating (Rotary). |
| Optal 7170H | A consumer packaging full resin bottle labeling adhesive |
| Optal 7500 | Consumer packaging premium labeling adhesive for coated glass bottles. |
| Optal LG-10 | Consumer packaging ice proof, high wet tack synthetic polymer labeling adhesive used to adhere a variety of label stocks to glass. |
| Optal LG-30MCR | High performance consumer packaging labeling adhesive for glass containers |
| P3 110 Cold Stripper | Paint booth stripper for uncured paints |
| P3 200 Paint Line Cleaner | Water-based, paint line cleaner |
| P3 200 WB Stripper | A water-based, thickened paint stripper for removing uncured paint from the walls, windows, grates and floors of spray booths and paint rooms |
| P3 215A & 215B Paint Line Cleaner | Paint line cleaner, media dissolves in rinse water step |
| P3 2226 Maintenance Cleaner | Water-based, general maintenance cleaner |
| P3 2227A Oven Cleaner | Water-based, general maintenance cleaner |
| P3 2247 Tacky Oven Coating | Tacky coating, high temperature, oven, solvent based |
| P3 2250 UF E-Coat Cleaner | Cleaner designed for ultra filtration cleaning |
| P3 2255 E-Coat Cleaner | Cleaner, E-Coat |
| P3 2455 Baffle Coating | Petroleum-based, water-resistant coating for protecting baffles, back sections, stacks, metal, concrete and any other wet areas |
| P3 2485A Clear Masking | Water-based coating for protecting paint spray booth walls and floors from over sprayed paint |
| P3 2486 Peelable Masking | Peelable barrier coating |
| P3 2491 Defoamer | Paint detackifier |
| P3 2495 Hi-Lite | Petroleum oil based, body-in-white highlighting material |
| P3 2495 Hi-Lite Wipes | Petroleum based sheet metal highlighting aid |
| P3 2498 Peelable Masking | Peelable barrier coating |
| P3 50 Hot Stripper | Hot paint stripper for cured paint |
| P3 Emulpon 314 | A water-soluble emulsion cleaner and rust inhibitor used for cleaning cutting fluid, drawing compounds, or any other greasy, oily soil from production parts quickly and safely. |
| P3 Emulpon C64 | A water-soluble emulsion cleaner and rust inhibitor. |
| P3 Forge 185 | Water soluble synthetic lubricant used for hot forging steel parts |
| P3 Forge 345 | Water soluble semi-synthetic lubricant used for hot forging steel parts |
| P3 Forge 4258 | Water dilute-able lubricant used when hot forging steel parts |
| P3 Forge 4774 | Water soluble lubricant used for hot forging steel parts |
| P3 Forge 5300 | Clear synthetic water soluble lubricant used for hot forging steel parts |
| P3 Grato 14 Marine (US) Cleaner | Concentrated, moderately alkaline liquid formulated to meet the requirements of industrial general maintenance cleaning needs. |
| P3 Grato 3000 Cleaner | P3-Grato 3000 is a water based, phosphate free, cleaning product designed for the exteriors of trains, cars, lorries, tarpaulin covers and other vehicles. |
| P3 Grato 50 Marine (US) Cleaner | P3 Grato 50 Marine (US) Cleaner Highly alkaline concentrated product designed for steam gun or high pressure manual applications on steel, copper, copper alloys and most plastics. |
| P3 Hot Stripper 3000 | P3 Hot Stripper 3000 Designed for the removal of cured paint from metal substrates. Highly recommended for aluminum, providing excellent etch resistance and performance. |
| P3 Hot Stripper 301 | Solvent paint stripper for removing heavy paint builds from aluminum, steel and various soft metals |
| P3 Hot Stripper Additive 15 | Hot paint stripper for cured paint |
| P3 Hot Stripper Additive 16 | P3 Hot Stripper 16 Additive is an organic, liquid product designed specifically for accelerating paint stripping operations. |
| P3 Hot Stripper Additive 19 | The P3 Hot Stripper 19 Additive is especially formulated for use in highly alkaline solutions to assist in the removal of paint. |
| P3 Lavoxyd Acid | P3-Lavoxyd Acid, is a foaming acid cleaner that has been specially developed for cleaning the exterior of railroad cars, busses, and tank wagons. |
| P3 Multan S Cleaner | Machine system cleaner for industrial applications |
| P3 Neutracare 200 | Neutral-based in-process cleaner with corrosion inhibitors designed for in-process corrosion protection on ferrous and aluminum alloys. |
| P3 Neutracare 300 | A neutral-based in-process cleaner with organic corrosion inhibitors designed for short-term corrosion protection on ferrous or aluminum alloys. |
| P3 Neutracare 5088 Cleaner | Moderate temperature multi-metal neutral cleaner with RP |
| P3 Neutracare 5156 Cleaner | A neutral cleaner applied on ferrous substrates. |
| P3 Neutracare 5175 Cleaner | Moderate temperature neutral cleaner for ferrous metals |
| P3 Neutracare 5177 | Neutral based in-process cleaner |
| P3 Neutracare 5220-1 Cleaner | Neutral cleaner suitable for all metal types including copper |
| P3 Parco 2407A Detack | Paint Detackifier |
| P3 Parco AWS 104 Cleaner | A water based, synthetic, body-in-white anti-weld spatter agent material that stays wet after application. |
| P3 Parcosol 307 | Purge solvent, solvent, cleaner |
| P3 Parcosol 577WB | Purge solvent, waterbased cleaner |
| P3 Polyprep 110 Cleaner | A phosphate-free, low-temperature cleaner for cleaning plastic substrates. |
| P3 PolyPrep 205 Rinse Aid | A rinse aid specially designed for use after plastic cleaning in plastic pretreatment operations. |
| P3 PolyPrep 2303 Cleaner | Phosphate-free alkaline cleaner specially formulated for cleaning of plastic surfaces |
| P3 PolyPrep 2595 Cleaner | A mildly acidic cleaner specially formulated for cleaning plastic surfaces. |
| P3 Polyprep 2615 Cleaner | Cleaner, plastics, pretreatment |
| P3 PolyPrep 2635 Cleaner | Phosphate-free acidic cleaner formulated primarily for cleaning of plastic surfaces. |
| P3 PolyPrep 3293 Cleaner | Acidic cleaner formulated primarily for cleaning plastic surfaces |
| P3 PolyPrep 400 Rinse Aid | Rinse additive for plastics |
| P3 Prevox 4141 | High flash, low residue rust preventative |
| P3 Prevox 4232 | A short-term rust preventative that can be used at a wide concentration range. It can be used on ferrous and non-ferrous metals and is applied either in a spray or immersion system. |
| P3 Prevox 501 | Synthetic corrosion inhibitor |
| P3 Prevox 505 | In-process RP for ferrous metals |
| P3 Prevox 5800 | Soluble oil rust preventative for long term storage |
| P3 Prevox 6041CR | A solvent-based corrosion inhibitor designed for extended corrosion protection on ferrous and galvanized alloys. |
| P3 Prevox 6767 | A soluble oil corrosion inhibitor designed for extended corrosion protection on ferrous alloys. Its unique composition provides a durable product for today’s heavy duty corrosion protecting needs. |
| P3 Prevox SN400C | A water-emulsifiable corrosion preventative that is specifically formulated for coating phosphated and painted parts. It contains a special additive system that provides a durable, self-healing, corrosion-resistant film. |
| P3 Rik 222 | General maintenance cleaner |
| P3 Saf-T-Clean 104 | General maintenance cleaner |
| P3 Saf-T-Clean 116 | General maintenance cleaner |
| P3 Sealer Line Cleaner 100 | Sealer, cleaner, solvent |
| P3 Tire Lube 40 | A water-based, very slightly viscous liquid lubricant for automatic or manual tire mounting operations |
| Parco 2280 Clean-up | General maintenance cleaner |
| Parco 2406 Detack | Paint detackifier, polymer, acidic |
| Parco AWS-100 | Anti-weld spatter |
| Parco Cleaner 1520A | Parco Cleaner 1520A Two package, low temperature, liquid cleaner formulated to prepare ferrous, zinc and aluminum surfaces to receive uniform, dense, crystalline conversion coatings. |
| Parco Cleaner 1533A | Used as makeup, required for bath build-up. |
| Parco Cleaner 2087X | Liquid cleaner for the removal of lubricants and other drawing compounds |
| Parco Cleaner 2988 | Parco Cleaner 2988, a concentrated cleaner, free of volatile hydrocarbons, was formulated for the effective removal of body sealers, drawing compounds and other soils prior to cleaning and phosphating. |
| Parco Cleaner 305 | Designed to prepare aluminum, steel, hot-dip galvanized and electrogalvanized steel surfaces. |
| Parco Cleaner 319 | Designed to prepare aluminum, steel, electrogalvanized and hot dip galvanized surfaces. |
| Parco Cleaner 319MM | Single package phosphate free liquid alkaline cleaner specially designed as a multi-metal cleaner. |
| Parco Cleaner 338 | Powder alkaline cleaner for multimetal sheet and stripline applications. |
| Parco Cleaner 470 | Non-silicated liquid, heavy duty spray cleaner designed for use in spray washing applications for cleaning ferrous metals. |
| Parco Cleaner 800 | Liquid alkaline cleaner especially designed for cleaning hard soils on steel galvanized and aluminum surfaces |
| Parco Cleaner 907 | Concentrated liquid, non-silicated, alkaline immersion cleaner for steel surfaces |
| Parco Lubrite 2 Manganese Phosphate Conversion Coating | Manganese wear resistant coating to permit rapid break-in of metal-metal surfaces. |
| Parco Lubrite 5 Manganese Phosphate Conversion Coating | Formulated to produce a non-metallic, corrosion resistant coating on iron and steel surfaces. |
| Parco Maintenance Cleaner 2235 | Parco Maintenance Cleaner 2235 is a concentrated blue liquid having a mild aroma formulated to meet the requirements of automotive and other industrial general maintenance cleaning needs. |
| Parco Preclean 2960 | Parco Preclean 2960 is a concentrated, water-based cleaner. It is effective in the body shop as well as the in the hand wipe operation of the automotive assembly line. |
| Parco Preclean 2978 | Parco Preclean 2978 is a concentrated, water-based cleaner which contains no volatile hydrocarbons. It is applied by hand wipe or misting in the preclean operation of the automotive assembly line. |
| Parco Preclean 2990 | Parco Preclean 2990 Concentrated, alkaline, water-based cleaner that is free of volatile hydrocarbons. |
| Parco Purge 2510 | Specialty formulated inhibited acid supplied in liquid form. |
| Parco Purge 2550 | Parco Purge 2550 Cleaner solution that is phosphoric acid-based and is specifically formulated for removal of scale from closed stainless steel heat transfer surfaces. |
| Parco Purge A-200 | Parco Purge A-200 is a concentrated, acidic liquid. It is especially designed to clean and prepare spray stages. |
| Parco Spray Wand 101 | Parco Spray Wand 101 Concentrated liquid product designed for steam gun and high pressure manual applications on steel surfaces for simultaneous cleaning and conversion. |
| Parco Spray Wand 200 | Designed to clean and impart an iron phosphate conversion coating on aluminum and zinc surfaces. |
| Parco Spray Wand 330 | Parco Spray Wand 330 Nonflammable phosphoric acid, surfactant-based cleaner, brightener and prepaint conditioner for aluminum. |
| Parcolac 2945 | |
| Parcolene 7100 RTU | Parcolene 7100 RTU Ready-to-use, patented, chromiumfree, post treatment chemical especially formulated for use over iron phosphate conversion coatings. |
| Parcolene 99 CWN | Parcolene 99 CWN Chromium-free product specifically formulated as a conversion coating/post-treatment process designed for zinc phosphate lines that process a high percentage of aluminum metal. |
| Parcosol 283 Cleaner | Blended solvents |
| Parcosol 283 Wipes | General maintenance cleaner |
| Passerite 1782 BL | Dry-in-place conversion coating process |
| Passerite 225 W | Chromate passivate for galvanized steel and galvalume |
| Passerite 3000 B-1 | Permanent thin organic coating |
| Passerite 3000 B-RW | Passerite 3000 B-RW is a permanent thin organic coating formulated for sheet or strip line application to zinc and zinc-aluminum alloy plated steel surfaces. |
| Passerite 3000 SI | |
| Passerite 3000 SI-RW | |
| Passerite 5004 | Non-chrome passivate for galvanized steel, galvalume and other zinc alloyed steels |
| Passerite 6003 | Non-hexavalent chrome passivate for galvanized steel, galvalume and other zinc alloyed steels |
| Prevox CO-4 | Heavy duty rust preventive for use on cold rolled, galvanized, and coated steels |
| Prevox CO-4BH | Extremely heavy duty rust preventive |
| Primamelt 5646 | |
| Purmelt Cleaner 2 | Hot melt cleaner for removing uncured RHM from equipment. |
| Purmelt Cleaner 785A | Roll coater cleaner for RHM roll coaters. Flake form. |
| Purmelt QR 004A | |
| Purmelt QR 149C | High green strength with mid-level range. Primarily used in garage doors. Roll coater stability could be issue on large coaters. |
| Purmelt QR 2011 | Purmelt QR 2011 is a 100%-solids, moisture-curing hot melt adhesive, that was designed to provide highly aggressive tack, combined with fast handling strength. |
| Purmelt QR 246CLV | Purmelt QR 246CLV is a one-component polyurethane reactive hot melt adhesive. |
| Purmelt QR 5003 | |
| Purmelt QR 5360 | Ideally suited for wrapping low surface energy PVC profiles without primer for interior applications. |
| Purmelt QR 677B | Primarily used on marker board and dry erase porcelain boards. |
| Purmelt QR 7011 | Purmelt QR 7011 is a 100%-solids, moisture-curing hot melt adhesive, that was designed to provide highly aggressive tack, combined with fast handling strength. |
| Purmelt QR 7799 | |
| Purmelt QR 8011 | Purmelt QR 8011 is a 100%-solids, moisture-curing hot melt adhesive, that was designed to provide wide open time window, good initial tack, combined with fast handling strength. |
| Purmelt QR 834A | This product is designed to provide highly aggressive tack, combined with very fast handling strength. It is formulated with patented technology to provide fast cure and contains color for improved visibility. |
| Purmelt QR 9016 | Purmelt QR 9016 is a 100%-solids, moisture-curing hot melt adhesive designed for very fast set and almost instant bonding. |
| Purmelt QR 913A | Very stable formulation with fair green strength, excellent range and great roll coater stability. |
| Purmelt QR-2580 | High performance polyurethane spine glue. |
| Purmelt QR-4511 | Reactive Polyurethane Hot Melt |
| Purmelt QR-4668 | High strength, moisture cure hot melt |
| Purmelt QR-5301 | High strength, medium setting, moisture cure hot melt |
| Purmelt QR-6208 | High strength, fast setting, moisture cure hot melt |
| Purmelt QR-862A | Purmelt® QR-862A™ This product is designed to provide highly aggressive tack, combined with very fast handling strength It is formulated with patented technology to provide fast cure and contains UV dye for improved visibility under ultraviolet source. |
| Purmelt R-200 UV | Purmelt R-200 UV next generation RHMPUR for RV sidewall lamination |
| Purmelt R-200F+ | Next generation RHMPUR for RV sidewall lamination |
| Purmelt R-508 | Purmelt R-508 Can be used for lamination and assembly of sandwich panel elements of wood, lauan, fiberboard, particleboard, plywood, FRP, EPS foam, PU foam and surface-treated metals. |
| Purmelt R-508B | Designed to give aggressive tack, short to medium open time and high green strength. |
| Purmelt R-600 | High green strength, moisture cure hot melt |
| Purmelt R-623 | Long open time, sprayable. |
| Purmelt Series Reactive Hot Melt Urethanes | High strength, thermoset moisture cure hot melt |
| QMI529HT-LV2C1.5 | Hysol QMI529HT-LV2C1.5 electrically conductive adhesive is designed for die attach applications. It is recommended for use in the attachment integrated circuits and components onto metallic leadframes. |
| QR 015A | Moisture-curing hot melt adhesive |
| Ridoline 1036 | Concentrated, highly alkaline, phosphate-free etching cleaner for aluminum |
| Ridoline 119 | Acid cleaner for aluminum and aluminum alloys |
| Ridoline 212 | Low temperature spray/immersion cleaner for aluminum |
| Ridoline 298 | High temperature immersion cleaner for aluminum, ideal for cleaning polishing compounds |
| Ridoline 412 | Mid-temperature solventized spray/immersion cleaner for aluminum |
| Ridoline 56 | Phosphate-free, non-etch alkaline cleaner for aluminiun and other metals |
| Rodine 102 | Rodine 102 is a powdered chemical designed to inhibit the attack of sulfamic and sodium bisulfate solutions on mild steel, stainless steel, copper and/or brass during industrial cleaning operations. |
| Rodine 103 NPF | Unique liquid inhibitor designed specifically for use in industrial cleaning operations to prevent acid attack on mild steel, stainless steel and copper or brass |
| Rodine 145L | Rodine 145L Liquid inhibitor especially designed for the reduction of acid attack on zinc and galvanized surfaces. |
| Rodine 2010 | Low toxicity, nonflammable, highly soluble, low viscosity, liquid metal loss inhibitor for use especially in tetraammoniated ethylenediaminetetraacetic acid (EDTA) cleaning solutions. |
| Rodine 213 SF | Organic, liquid cationic corrosion inhibitor especially desiged to inhibit the attack of hydrochloric acid on iron and steel during industrial cleaning operations. |
| Rodine 214 | Rodine 213™ with approved defoamer and red dye |
| Rodine 31A | Rodine 31A Liquid, cationic acid inhibitor designed specifically for use in chemical cleaning operations where chloride-free solvents such as citric, hydroxyacetic and formic acids are used. |
| Rodine 3305 | Low viscosity liquid, non-foaming inhibitor for use in hydrochloric acid continuous or batch type pickling operations. |
| Rodine 426 | Rodine 426 is a low toxicity organic liquid, cationic corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid on iron and steel during industrial cleaning operations. |
| Rodine 55 | Rodine 55 is an amber-colored, powdered inhibitor designed for use in conventional sulfuric acid pickling operations. |
| Rodine 85 Acid Inhibitor | |
| Sanicare 86-7110 | Rubber-based construction adhesive. |
| Sanicare HM-6405 | Sanicare high tack positioning adhesive. |
| Sanicare HM-6410 | Sanicare medium tack positioning adhesive. |
| Sanicare HM-6700US | Non-rubber based construction adhesive used for bonding PE to nonwovens, PE to PP and PP to nonwovens. |
| Sanicare SH4-165-3 | Non-rubber based construction adhesive. |
| Sanicare SH4-187 | Sanicare rubber-based multipurpose and elastic adhesive. |
| Stycast CAT 11 | Catalyst used with Stycast resins. |
| STYCAST EO2000HV | STYCAST EO2000HV one component, oxide-filled epoxy adhesive used in potting. |
| TECHNOMELT 8378 | High temperature consumer packaging hot melt used for case and carton sealing. Standard EVA technology. |
| TECHNOMELT AS 27621 | Filled, high heat resistance, and very versatile. |
| TECHNOMELT AS 491C | Aggressive tack, ASTM E84 |
| TECHNOMELT AS 5613 | High green strength, fast tack, excellent mileage, easy to spray, soft bond line, semi pressure sensitive. |
| TECHNOMELT AS 837 | Unfilled EVA hot melt for high speed wrapping with thin laminates. |
| TECHNOMELT AS 850C | High heat resistance PSA to bond flexible urethane foam to laminate floors. |
| TECHNOMELT EM 155A | Wrap around labeling |
| TECHNOMELT EM 4942 | |
| TECHNOMELT PA 3402 | PAHM, toughest, highest heat- & chemical-resistant workhorse. |
| TECHNOMELT PA 3412 | Versatile adhesive for metals, glass, PVC and other plastics and paper stocks. |
| TECHNOMELT PUR 3180 CLEANER | EVA purge for RHM drum platens. |
| TECHNOMELT PUR 3365 | Reactive Prepolymer |
| TECHNOMELT PUR 513C | Industry standard for garage door product. Most economical. |
| TECHNOMELT PUR 5301 | Premium product for PVC and aluminum profiles, problem solver. |
| TECHNOMELT PUR 5401M | Ideally suited for wrapping Renolit's FAST film, as well as for basic PVC wrapping. |
| TECHNOMELT PUR 631B | Medium viscosity with very aggressive tack. |
| TECHNOMELT PUR 632B | Medium viscosity with very aggressive tack. |
| TECHNOMELT PUR 781A | Extremely high initial green/set strength and fast set speed on roll coat application. |
| TECHNOMELT PUR 850A | Moisture-curing hot melt adhesive |
| TECHNOMELT SUPRA 606 | Consumer packaging hot melt used for case and carton sealing. |
| TECHNOMELT 246A | Specialty, rubber based consumer packaging and bag seal hot melt. |
| Technomelt 2557 Hot Melt Adhesive | Specialty consumer packaging hot melt used for case and carton sealing. Sift-Proof Technology. |
| Technomelt 2631 | General packaging adhesive. |
| Technomelt 2635 | General purpose packaging adhesive used for case and carton sealing, and trayforming applications. |
| Technomelt 269C | General packaging applications, including preapplied heat seal. |
| Technomelt 277A | Used where no drying is available. |
| Technomelt 2787 | Recommended for poly seaming for bread bags; good on PE and valeron; rubber-based |
| Technomelt 279A | Carton seal hot melt for difficult surfaces with high performance straw attachment. |
| Technomelt 2899 | For laminating nonporous stock |
| Technomelt 357US | Low viscosity, high performance PSA hot melt. |
| Technomelt 377US | Medium viscosity, high performance PSA hot melt. |
| Technomelt 5621 | |
| Technomelt 614A Hot Melt Adhesive | Specialty consumer packaging hot melt used for case and carton sealing. |
| Technomelt 6617 | Lead recommendation for clay coated pinch bottoming. |
| Technomelt 6650 | High adhesion for poly seaming on higher guage films >1mil. |
| Technomelt 80-8309 | Flexible hot melt for filters |
| Technomelt 80-8361 | Heat reactivated hot melt for filters |
| Technomelt 80-8364 | High performance consumer packaging hot melt for case and carton sealing. |
| Technomelt 80-8448 | Excellent general purpose EVA hot melt used for filter assembly and in consumer packaging for case and carton sealing. |
| Technomelt 80-8492 | Wire scrim to media for filters |
| Technomelt 80-8647 | A flame retardant assembly adhesive. |
| Technomelt 80-8649 | Fast setting, medium viscosity hot melt, formulated for general assembly applications |
| Technomelt 80-8697 | A general purpose PSA hot melt designed for use in pre-applied applications. |
| Technomelt 80-8743 | High performance conventional spine hot melt. |
| Technomelt 80-8797 | Light-colored, medium viscosity, polyolefin hot melt adhesive. |
| Technomelt 80-8804 | A low application temperature hot melt. |
| TECHNOMELT 8060 (Known as Technomelt 80-8060) | Freezer grade consumer packaging hot melt for case and carton sealing. |
| Technomelt 8278 | Lead recommendation for paper to paper pinch bottoming. |
| Technomelt 8370 Hot Melt Adhesive | Consumer packaging hot melt for case and carton sealing. |
| Technomelt 8481 Hot Melt Adhesive | Specialty consumer packaging hot melt used for case and carton sealing. Wax board technology. |
| Technomelt 86-7127 | General purpose hot melt pressure sensitive adhesive developed as the food contact surface of labels applied to fruits and vegetables. |
| Technomelt 86-7129 | General purpose pressure sensitive hot melt adhesive, designed for bonding polyethylene packaging slips to corrugated, polypropylene. |
| Technomelt 86-8845 | A permanent PSA hot melt. |
| Technomelt 8628 Hot Melt Adhesive | Specialty consumer packaging hot melt adhesive use for case and carton sealing. Hot Filled Technology. |
| TECHNOMELT 8629 (Known as Technomelt 80-8629) | Fast tack packaging hot melt adhesive with excellent pot stability. |
| Technomelt 8633 Hot Melt Adhesive | Specialty consumer packaging hot melt used for case sealing and tray forming. Beef packer technology. |
| TECHNOMELT 8651 (Known as Technomelt 80-8651) | Fast setting & high tack hot melt. |
| Technomelt 8668 | Technomelt 8668 is a high viscosity, permanent pressure sensitive hot melt designed for assembly application requiring high peel, shear and heat resistance. |
| Technomelt 870C | This adhesive provides excellent machining at various line speed. |
| Technomelt 871B | Hot melt adhesive for textile and structural bonding. |
| Technomelt 8848 | Technomelt 8848 is a hot melt adhesive specifically designed as a foam-in-place gasket/sealing material. |
| Technomelt 947C | Excellent adhesion to carbon/ceramic block and end caps. |
| Technomelt 991A Hot Melt Adhesive | Specialty consumer packaging hot melt used for case and carton sealing. Frozen food technology. |
| TECHNOMELT AS 7875 | Moldable polyolefin for demanding moisture and solvent resistance. Excellent adhesion to the most difficult substrates. Polyolefin – Excellent Adhesion to Metals, Plastics, Tough Surfaces |
| Technomelt COOL 100D Hot Melt Adhesive | Low temperature consumer packaging hot melt used for case and carton sealing. |
| Technomelt Cool 134D Hot Melt Adhesive | Low temperature consumer packaging hot melt used for case and carton sealing. |
| Technomelt COOL 215D | Consumer packaging hot melt used for book binding. Pigmented version of versatile grade. |
| Technomelt Cool 250A | Consumer packaging hot melt used for case and carton sealing. |
| Technomelt COOL 250F Hot Melt Adhesive | Low temperature consumer packaging hot melt adhesive used for case and carton sealing. |
| TECHNOMELT COOL 416C | Consumer packaging hot melt used for book binding. Versatile - balance of adhesion. |
| Technomelt COOL 684C | Consumer packaging hot melt used for book binding. |
| TECHNOMELT COOL 791C | Consumer packaging hot melt adhesive for book binding, low odor. |
| Technomelt COOL 869C | Consumer packaging hot melt for book binding, low odor. |
| Technomelt COOL 889A Hot Melt Adhesive | Low temperature consumer packaging hot melt used for case and carton sealing. |
| Technomelt COOL 975C | Consumer packaging hot melt adhesive, pigmented version of versatile grade. |
| TECHNOMELT EM 115 | Consumer packaging hot melt designed for the carbonated soft drink (CSD) market. Metallocene / rubber-based. |
| TECHNOMELT EM 369 | Consumer packaging hot melt, high performance full pressure sensitve hot melt for container labeling, hot fill and high speed applications |
| TECHNOMELT EM 377 | Consumer packaging hot melt, clear product that provides a wide operating range especially on cold wet CSD bottles. |
| TECHNOMELT EM 396C | Consumer packaging hot melt adhesive. Increased adhesion provides a wide operating range especially on cold wet metal bottles. |
| TECHNOMELT EM 4955 | Consumer packaging hot melt handles most can labeling best when materials are packed warm. |
| TECHNOMELT EM 8572 | Good hot tack, broad temperature range |
| Technomelt EM-4955 | Good Adhesion to Glass, Metal, PET & Media - FDA 175.105 |
| TECHNOMELT GA 003A | Most versatile, very low staining. |
| TECHNOMELT GA 007A | Versatile - industry standard. |
| TECHNOMELT GA 1103 | Rubber based perfect binding hot melt |
| TECHNOMELT GA 1214 | Non-PSA side-hinge-backer |
| TECHNOMELT GA 163B | Consumer packaging hot melt adhesive, Box Ultimate - two-shot cold-hot or soft cover. |
| TECHNOMELT GA 354B | Excellent adhesion and best machining. |
| TECHNOMELT GA 485D | Consumer packaging hot melt adhesive, Premium - softcover spine. |
| TECHNOMELT GA 488D | Versatile - balance of adhesion. |
| TECHNOMELT GA 530D | Hot Melt Adhesive |
| TECHNOMELT GA 580D | Hot Melt Adhesive |
| TECHNOMELT GA 6538 | Hot Melt Adhesive |
| TECHNOMELT GA 6554 | Hot Melt Adhesive |
| TECHNOMELT GA 8669 | Removable hot melt pressure sensitive adhesive. |
| TECHNOMELT PA 2192B | A high melting polyamide hot melt adhesive |
| TECHNOMELT PA 2333B | Good adhesion to a variety of substrates such as plastics, wood, metal & vinyl. |
| TECHNOMELT PA 6240 | Thermoplastic, high performance, hot melt adhesive |
| TECHNOMELT PA 6300 | High melting polyamide adhesive |
| TECHNOMELT PA 7808 | Great flexibility offers incredible strain relief on cables and wires. Polyamide – Adhesion to Plastics |
| TECHNOMELT PA 7808 BLACK | Moldable polyamide with excellent adhesion to tough substrates. Polyamide – Adhesion to Plastics |
| TECHNOMELT PA 7833 | Moldable polyamide with service temperature up to 257°F (125°C), such as in an automotive firewall. Polyamide – Adhesion to Plastics |
| TECHNOMELT PA 7838 BLACK | Moldable polyamide with service temperature up to 257°F (125°C), such as in an automotive firewall. Polyamide – Adhesion to Plastics |
| TECHNOMELT PA 7841 | Moldable polyamide where strength and hardness are needed, such as in memory sticks and computer connectors. Polyamide – Increased Hardness |
| TECHNOMELT PA 7846 BLACK | Moldable polyamide where strength and hardness are needed, such as in memory sticks and computer connectors. Polyamide – Increased Hardness |
| TECHNOMELT PA 7848 BLACK | UV stability and suitable for outdoor applications. Polyamide – Increased Hardness |
| TECHNOMELT PA 7852 | Moldable polyamide where excellent adhesion and cold temperature flexibility are important, such as in an automotive exterior. Also used extensively in white goods. Polyamide – Adhesion to Plastics |
| TECHNOMELT PA 7857 BLACK | Moldable polyamide where excellent adhesion and cold temperature flexibility are important, such as in an automotive exterior. Also used extensively in white goods. Polyamide – Adhesion to Plastics |
| TECHNOMELT PA 7873 | Moldable polyamide with good adhesion for higher temperature applications, such as in an automotive underhood. Polyamide – High Temperature Resistance |
| TECHNOMELT PA 7878 BLACK | Moldable polyamide with good adhesion for higher temperature applications, such as in an automotive underhood. Polyamide – High Temperature Resistance |
| Technomelt PS 4144 | Pressure sensitive adhesive with general purpose adhesion to a wide variety of substrates (including recycled corrugated board). |
| Technomelt PS 4233 | Pressure sensitive adhesive with very high tack and peel with good shear. Excellent specific adhesion to low energy surfaces. |
| Technomelt PS 446B | Bottoming for small multi-wall pet food bags. Starches 20- |
| Technomelt PS 713A | Pressure sensitive adhesive with good balance of tack, peel and shear. |
| Technomelt PS 8686 | A hot melt pressure sensitive adhesive. |
| Technomelt PS 8697 | General purpose, pressure sensitive hot melt |
| Technomelt PS-8843X | 83-8843 is specifically formulated to bond low energy materials such as polypropylene, polyethylene and polystyrene to foam insulation made from these same materials or to other substrates such as polycarbonate, wood or metal. |
| TECHNOMELT PUR 608C | Very short open time and fast setting. |
| Technomelt Q 003A | Hot Melt for Plastic, Paper, Glass, Metal |
| Technomelt Q 007A | Hot Melt Adhesive |
| Technomelt Q 1213 | Hot Melt Lining |
| Technomelt Q 1225 | Two Shot Binding |
| Technomelt Q 354B | Hot Melt Adhesive |
| Technomelt Q 4341 | Consumer packaging hot melt adhesive, Ultimate - two-shot cold-hot or soft cover. |
| Technomelt Q 448D | Consumer packaging hot melt adhesive, premium - softcover spine. |
| Technomelt Q 490D | Versatile - balance of adhesion. |
| Technomelt Q 490D | Versatile - balance of adhesion. |
| Technomelt Q 561D | Standard - good adhesion. |
| Technomelt Q 561D | Hot Melt Adhesive |
| Technomelt Q 562D | Hot Melt Adhesive |
| Technomelt Q 579D | Long open time, medium set speed, excellent cold flex and heat resistance. |
| Technomelt Q 580D | Non-PSA side-hinge-backer. |
| Technomelt Q 84-8890 | |
| Technomelt Q 916C | Consumer packaging hot melt used in book binding. |
| Technomelt Q-4206 | Technomelt Q-4206 is a general assembly adhesive primarily designed for use in air filter assembly. |
| Technomelt Q-4222 | An assembly adhesive with high temperature creep resistance for the air filter industry. |
| Technomelt Q-5669 | Technomelt Q 5669 is a flame-retardant adjusted hot melt adhesive with low smoke level. |
| Technomelt Supra 100 Hot Melt Adhesive | High temperature consumer packaging hot melt used for case and carton sealing. |
| Technomelt Supra 106M Hot Melt Adhesive | High temperature consumer packaging hot melt used for case and carton sealing. |
| Technomelt Supra 108 | Hot Melt Adhesive |
| Technomelt Supra 200 | Very high quality case/carton sealing and tray forming hot melt. |
| Technomelt Supra 400 Cool | TECHNOMELT® SUPRA 400 COOL is a high quality case/carton sealing and tray forming hot melt designed to apply at 275°F to reduce energy costs. |
| Technomelt Supra 605 Hot Melt Adhesive | High quality consumer packaging hot melt designed for case and carton sealing. |
| Technomelt Supra 614C Hot Melt Adhesive | High temperature consumer packaging hot melt used for case and carton sealing. |
| Technomelt Supra 7450 Hot Melt Adhesive | Specialty consumer packaging hot melt used for case and carton sealing. Fridge pack Supra technology. |
| Technomelt Supra 772C Hot Melt Adhesive | Consumer packaging hot melt used for case and carton sealing. |
| Technomelt Tack 1213 | Standard grade. |
| Technomelt Tack 1225 | Premium - edition spine, fast trim. |
| Technomelt Tack 8669 | Repositionable. |
| Terocore 16000 Series | Panel reinforcement |
| Terocore 16100 Series | Panel reinforcement |
| Terocore 16301 | Non-magnetic, high strength structural epoxy. |
| Terocore 2000 Series | Series of PU structural cavity filling foam based on low mdi two component urethane technology |
| Terocore 20000 Series | Structural pre-form weld-throughs |
| Terocore 20003 | Heat-curing, epoxy-based structural adhesive in tape form. |
| Terocore 20101 | Epoxy-based, high-strength structural weld-through tape. |
| Terocore Series | Structural 1 component and 2 component epoxy foams |
| Terokal 2300 | This one-component, heat-cured, expandable structural adhesive is a low to medium performance product. |
| Terokal 2400 | An epoxy-based, heat-cured, expandable, wash resistant, structural adhesive |
| Terokal 4555B | This one-component, solvent-free, impact resistant, heat curable structural resin is a very good all-around adhesive. |
| Terokal 4560 | One component solvent free, impact resistant heat curable epoxy based adhesive. |
| Terokal 5011 | Expandable high fracture toughness adhesive for metal bonding |
| Terokal 5089 | One-component, heat curable, high performance, impact resistant structural adhesive |
| Terokal 5308 | Induction curable adhesive for metal bonding |
| Terolan 1284 | Paint shop body sealer |
| Terolan 1285 | Paint shop body sealer |
| Terolan 986 | A solvent free PVC based plastisol |
| Terolan SA-1095 | Paint shop body sealer |
| Terolan SA-1185A | Paint shop body sealer |
| Terolan SA-1550A | Terolan SA-1550 is an ultra-low density, brushable vinyl plastisol sealer capable of being applied over ELPO and Uniprime. |
| Terophon 21000 Series | Dry injection/extrusion expandable |
| Terophon 22000 Series | Tacky expandable |
| Terophon 23000 Series | Mastic sealer |
| Terophon 24000 Series | Tacky body shop magnetics |
| Terophon 2700 Series | Acoustic sound deadener |
| Terophon 2751 | A waterborne compound that is spray applied using airless equipment |
| Terophon 40000 Series | Series of acoustic foams with a range of pumpable, low mdi acoustical cavity filling foams |
| Teroson MS 930 Sealant | A one component sealant based on silane modified polymer, which cures by reaction with moisture to a soft elastic product |
| Teroson MS 930, Sealant, White | Teroson MS 930 is a gun-grade, one component sealant based on silane modified polymer, which cures by reaction with moisture to a soft elastic product. |
| Teroson MS 9360 Sealant | One part humidity moisture curing elastic adhesive, silane modified polymer |
| Teroson MS 939 Black Adhesive / Sealant | One part humidity moisture curing elastic adhesive, silane modified polymer |
| Teroson MS 939 White Adhesive / Sealant | One part humidity moisture curing elastic adhesive, silane modified polymer |
| Terostat 06-1201 | Fuel resistant weld through body shop sealer and anti-flutter |
| Terostat 06-1236 | A pumpable, highly expandable, weld-through, gas resistant, anti-flutter body shop sealer, GM approved. |
| Terostat 06-1242 | A pumpable, highly expandable, weld-through, gas resistant body shop sealer, anti-flutter, GM approved. |
| Terostat 06-1272 | Weldable, gas resistant, anti-flutter body shop sealer, GM approved. |
| Terostat 06-1273 | Capable of being applied over oily galvanized and oily cold rolled steel, for application in anti-flutter, spot weld seams, fender, roof bow, body stiffeners and seal hinges, GM approved. |
| Terostat 10000 Series | Pre-formed weld-throughs |
| Terostat 10100 Series | Pre-formed weld-throughs |
| Terostat 10200 Series | Pre-formed weld-throughs |
| Terostat 11000 Series | Tacky paintables |
| Terostat 12000 Series | Dry paintables |
| Terostat 1297 | An expanding, weld-through semi-structural anti-flutter sealer, GM approved. |
| Terostat 15000 Series | Pre-formed hot melt sealers |
| Terostat 15100 Series | Dry flowable injection molded gauge and drain |
| Terostat 1805 | Expandable body shop sealer and anti-flutter adhesive, Ford approved. |
| Terostat 19000 Series | High-strength hot melt sealers |
| Terostat 2060.1 | A modified vinyl plastisol that is paintable and non-expandable. |
| Terostat 2102 AC/BC | Two component hem flange sealant and low strength adhesive |
| Terostat 27000 Series | Fuel resistant expandable |
| Terostat 28000 Series | Roof ditch seams |
| Terostat 3210Z | Cold-applied, weld-through sealer. |
| Terostat 3211-2F-01 | Expandable body shop sealer and anti-flutter adhesive, BMW approved |
| Terostat 3221AA-01 | Expandable body shop sealer and anti-flutter adhesive, Mercedes approved. |
| Terostat 3222 | Expandable body shop sealer and anti-flutter adhesive |
| Terostat 3230-CU-01 | Solvent-free, reactive adhesive/sealant, BMW approved |
| Terostat 3230AB-25 | A solvent-free, reactive adhesive/sealant based on rubber that softens at higher temperatures, BMW approved. |
| Terostat 4000-F | An ambient-applied material that cures and expands upon heating. |
| Terostat 4010.9 | A soft, expandable, non-solvent mastic adhesive. Chrysler approved. |
| Terostat 4010.9AL | A cold-applied, pumpable adhesive that is applied between inner and outer panels. Chrysler approved. |
| Terostat 4600 | A cold-applied, pumpable, weld-through sealer. |
| Terostat 475.3 | A non-expandable, high temperature cure. |
| Terostat 4980 | A cold-applied, pumpable, weld-through sealer, Mitsubishi approved. |
| Terostat 5918 | Expandable body shop sealer and anti-flutter adhesive, GM approved. |
| Terostat 6100G | A pumpable, highly expandable, weld-through, gas-resistant, anti-flutter body shop sealer, GM approved. |
| Terostat 7100 Adhesive / Sealant | Elastomeric adhesive / sealant based on Henkel's proprietary Flextec™ technology. |
| Terostat 7700 Adhesive | Elastomeric adhesive based on Henkel's proprietary Flextec™ technology. |
| Terostat 8517 H Glass & Metal Primer | Highly liquid glass and metal primer |
| Terostat 8519 P Primer/Activator | Primer/Activator |
| Terostat 8521 Plastic & Painted Substrate Primer | Plastic and painted substrate primer |
| Terostat 8597 HMLC Direct Glazing Adhesive | A one component, moisture curing direct glazing adhesive |
| Terostat 8599 Direct Glazing Adhesive | A one component, moisture curing direct glazing adhesive with excellent sag resistance |
| Terostat 9000 PL HMLC Direct Glazing Adhesive | Modified silane (MS) Polymer window glazing adhesive |
| Terostat 9096 PL Direct Glazing Adhesive | Polyurethane window glazing adhesive |
| Terostat 960H | A permanent, pumpable hot apply plastic sealant / adhesive. Adhesion is physical and thereby reliant on a press procedure. |
| Terostat 969 US1B | Plastic one component adhesive/sealant |
| Terostat MS 642 | Designed for laminating flexible modules on plastic or metal panels |
| Terostat MS 930 Sealant, Black | One part humidity moisture curing elastic sealant, silane modified polymer |
| Terostat MS 935 | A one component sealant based on silane modified polymer, which cures by reaction with moisture to a soft elastic product |
| Terostat MS 9371B | Used with standard MS products (930, 935, 939, 9360) to create a two component product. |
| Terostat MS 9380 Sealant, White | A high viscosity, sag-resistant, two component adhesive |
| Terostat MS 9382 | A high viscosity, sag-resistant, two component adhesive |
| Terostat PT 13000 Series | Tacky magnetic paintables |
| Terostat SA-351-2B | Expandable body shop sealer and anti-flutter adhesive, Toyota approved. |
| Terostat SA-4000.5 | A cold-applied, pumpable, weld-through sealer. |
| Terostat SA-407D | Expandable body shop sealer and anti-flutter adhesive |
| Terostat SA-415 | Expandable, wash-off resistant sealer for use in body-in-white applications. |
| Terostat SA-415 | Catalyst used with Stycast resins. |
| Terostat SA-4250.E | Cold-applied, pumpable anti-flutter adhesive / sealant. Chrysler approved. |
| Terostat SA-440 | Cold-applied, pumpable, non-PVC sealer. |
| Terostat SA-4510 | Cold-applied, pumpable adhesive that prevents metal-to-metal contact. Chrysler approved. |
| Terostat SA-459 | Cold-applied, pumpable, weld-through, anti-flutter sealer that is for use on spot-welded joints, Mazda approved. |
| Terostat SA-463 | Cold-applied, pumpable, weld-through, anti-flutter sealer that is for use on spot-welded joints, Nissan approved. |
| Terostat SA-464 | Cold-applied, pumpable, weld-through, anti-flutter sealer for use on spot-welded joints to prevent passage of water or dust, Subaru approved. |
| Terostat SA-465 | Cold-applied, pumpable, weld-through, anti-flutter sealer for use on spot welded joints to prevent passage of water or dust, Mitsubishi approved. |
| Terostat SA-476.3 | Non-expandable, high temperature cure, wash-off resistant, anti-flutter sealer for use in body-in-white applications, Subaru approved. |
| Terostat SA-477 | Heat curing, solvent-free, metal-to-metal mastic adhesive. Anti-flutter. Subaru approved. |
| Terostat SA-4800 | Cold-applied, pumpable, anti-flutter adhesive designed to expand when subjected to heat to form a soft closed-cell foam. Mitsubishi approved. |
| Terostat SA-4810 | Cold-applied, pumpable, anti-flutter adhesive to prevent metal-to-metal contact and reduce vibration, Nissan approved. |
| Terostat SA-490 | Cold-applied, pumpable, non-PVC, anti-flutter sealer that is applied between inner and outer panels to prevent metal-to-metal contact and to reduce vibration, Honda approved. |
| Terostat SA-491 | Cold-applied, pumpable, non-PVC, anti-flutter sealer that is applied between inner and outer panels to prevent metal-to-metal contact and to reduce vibration, Honda approved. |
| Terostat TSA-53C | Cold-applied, pumpable, weld-through sealer for use on spot-welded joints to prevent passage of water or dust. |
| Terotex 3599-5 | PVC underbody coating |
| Terotex CTA-500 | Non-PVC expandable underbody coating and seam sealer |
| Terotex PTA-184B | Lightweight, high performance PVC underbody coating and anti-chip coating |
| Terotex PTA-188-1 | Paint shop underbody/interior coating |
| Terotex PTA-198 | Paint shop underbody/interior coating |
| Tower Brom 60M | Biocide |
| Turc 4338-L | Alkaline degreaser and rust remover. |
| Turco 1270-5 | Paint stripper for composite substrates on aircraft |
| Turco 1270-6 | Paint stripper for composite substrates on aircraft. |
| Turco 4181L | Alkaline rust remover |
| Turco 4215 NC-LT | Non-silicated, non-chromated, mildly alkaline cleaner |
| Turco 4409 | Inhibited acidic scale remover. |
| Turco 4409 GL | Inhibited acidic scale remover. |
| Turco 5578-L | Alkaline cleaner and etchant for titanium, columbium and titanium alloys. |
| Turco 5668 | Hot tank paint stripper |
| Turco 5668 Additive #1 | Turco® 5668™ Additive #1 |
| Turco 5668 Additive #3 | Turco® 5668™ Additive #3 |
| Turco 5805 | Alkaline cleaner and brightener. |
| Turco 5884 | On-line / off-line jet engine compressor cleaner. |
| Turco 5948-DPM | Heavy duty alkaline cleaner. |
| Turco 5948-DPM Thick | Environmentally advantaged thixotropic, water-based, heavy-duty aircraft cleaner. |
| Turco 5948-R | Heavy duty alkaline cleaner. |
| Turco 6751-L | Liquid alkaline low-temperature cleaner for spray applications. |
| Turco 6776 Thin | Light amber, diphase liquid developed for removing chemical resistant paints |
| Turco 6776-LO | Water-based environmentally advantaged paint remover. |
| Turco 6783-10 | Environmentally advantaged (EA), ready-to-use, on-line / off-line jet engine compressor cleaner. |
| Turco 6802 | A clear amber liquid developed to remove platter’s wax remover. |
| Turco 6813-E | Water-based environmentally advantaged paint remover. |
| Turco 6840-S | Water-based environmentally advantaged paint remover. |
| Turco 6849 | Alkaline degreaser. |
| Turco 6871 | |
| Turco 6881 | |
| Turco 9045-6 | Water-based carbon remover. |
| Turco Aerowash | Concentrated liquid all-purpose maintenance cleaner for use on all metals, glass, painted surfaces and plastics |
| Turco Aerowash XTR-1 | |
| Turco Air-Tec #23 | Heavy-duty exterior aircraft cleaner. |
| Turco Aldet | A non-silicated, caustic-free, mildly alkaline granular product designed for immersion cleaning applications on aluminum and aluminum alloys without etching the aluminum alloy itself |
| Turco Aldox V | Non-chromated deoxidizer and desmutter for aluminum alloys. |
| Turco Altrex 24 | An inhibited, non-etching, concentrated liquid alkaline cleaner for cleaning aluminum and aluminum alloys |
| Turco Alumiprep 33 | Non-flammable phosphoric acid based cleaner, brightener and prepaint conditioner for aluminum |
| Turco Aquasorb | Water displacing oil. |
| Turco Aviation | White granulated alkaline compound formulated for the removal of mill inks, oils, shop soils and other difficult-to-remove soils from aluminum, steel, copper, magnesium, cadmium and nickel alloys. |
| Turco C 2087X | A single package liquid cleaner formulated for the removal of lubricants and other drawing compounds or oils |
| Turco C NVT | A heavy-duty, alkaline cleaner for immersion and barrel cleaning operations. |
| Turco Deoxalume 2310 | Chromium-Free Deoxidizer/Desmutter for Aluminum |
| Turco Deoxidizer 16 | Process primarily utilizes two liquid products: Deoxidizer 6 Makeup and Deoxidizer 16 Replenisher |
| Turco Deoxidizer 6 | Process primarily utilizes two liquid products: Deoxidizer 6 Makeup and Deoxidizer 16 Replenisher |
| Turco EA 6930 Stripper | Environmentally advantaged (EA) hydrogen peroxide activated paint remover. |
| Turco Liquid Alumigold C | An acidic liquid product used to produce a chromate conversion coating on aluminum and all its alloys. |
| Turco Liquid Smut-Go NC | Non-chromated deoxidizer and desmutter for aluminum alloys. |
| Turco Liquid Smut-Go NC-B | Non-chromated deoxidizer and desmutter for aluminum alloys. |
| Turco Liquid Sprayeze NP-LT | Alkaline degreaser. |
| Turco Metal Glo #6 | Cleaner and conditioner for aluminum aircraft surfaces. |
| Turco Metal Glo FF | Cleaner and conditioner for aluminum aircraft surfaces. |
| Turco Metal Glo FF RTU | Cleaner and conditioner for aluminum aircraft surfaces. |
| Turco Mil-Etch | Powder alkaline aluminum etchant |
| Turco Nitradd (T-4104 ) | Acidic compound / deoxidizer |
| Turco Nova EC-202 L | Liquid aluminum etchant cleaner |
| Turco Ridoline 4355 | Liquid phosphate-free, non-etching product for cleaning aluminum alloys |
| Turco Ridoline 909 | A medium-duty, caustic-free, immersion cleaner that provides excellent wetting, emulsifying and dispersing properties |
| Turco Rust Bloc | Corrosion preventative rinse additive. |
| Turco Scale Gon 5 | Mildly acidic scale conditioner. |
| Turco Scale Gon 7 | Mildly acidic scale conditioner. |
| Turco Vitro-Klene | Hot tank caustic cleaner for ferrous and titanium alloys. |
| Turco WO #1 | Aircraft liquid acid cleaner and deoxidizer for use on aluminum and aluminum alloys. |
| Turco® 6783-50™ | Environmentally advantaged (EA), ready-to-use, on-line / off-line jet engine compressor cleaner. |
| Velocity SP 29-962A | Performance Enhancer for Starch Based Corrugating Adhesives. |