General purpose seal gum

General purpose assembly

General purpose assembly

Single ply corewinding, fast setting adhesive, excellent wet tack, good mechanical stability, dries clear

A high wet tack, fast set speed, layflat

10% concentrate laminating adhesive

General purpose assembly

General purpose assembly

General purpose assembly

Versatile general purpose patch gum adhesive for envelope equipment that runs at speeds up to 900 EPM

Casing in resin

Transfer adhesive for bathroom tissue roller applications. Long open time and high tack with excellent dry release. Non-staining and water-soluble.

Adhesin, transfer adhesive for household toweling roller applications, long open time and high tack with excellent dry release, non-staining and water-soluble

Adhesin, single and multi-ply towel tail tie adhesive for spray, extrusion, or bar/wire applications, high wet tack, water soluble, and invisible when dry; excellent release characteristics

Electrolytic coloring process for anodized aluminum

Liquid additive for sulfuric acid anodizing baths that reduces time, energy consumption, and the amount of refrigeration required for a given anodizing process

A convenient felt-tipped conversion coating repair tool.

Non-flammable, acid based, chemical coating that produces a protective coating on aluminum and its alloys

Liquid chemical used to produce a protective coating on aluminum or aluminum alloys

Additive part of chrome free cobalt based conversion coating for aluminum

Toner part of chrome free cobalt based conversion coating for aluminum

Chrome-free zirconium polymer conversion coating for aluminum

Ready to use chrome-free titanium polymer conversion coating for aluminum

Powdered chemical used to produce a conversion coating on aluminum and its alloys

A felt-tipped marker that provides a dry-in-place conversion coating on aluminum surfaces prior to painting; ideal for coating repair work

Formulated for treating magnesium alloys to conform to SAE AMS-M-3171, Type VI

Complex trivalent chromium conversion coating formulated for treating aluminum and its alloys

Concentrated liquid alkaline product developed to produce a fine satin etch on aluminum and its alloys

Water based exterior trim

Water based friction

Water based friction

Water based friction

Water based friction

Cleaner is a blend of inorganic alkaline components which remove moderate to heavy deposits of mill oil from ferrous substrates

Appearance enhancing seal rinse technology

Economical, low bake, environmentally friendly corrosion protection coating for steel parts

Seal rinse technology with enhanced chemical resistance

Formulated for spray and immersion application to steel, aluminum and zinc surfaces to simultaneously clean and develop a conversion coating.

Complex oxide pretreatment for hot dip galvanized or electrogalvanized

Chrome dried in place pretreatment

Dry-in-place conversion coating for steel.

Conversion coating process for cold forming

Polycrystalline zinc phosphate conversion coating designed for multi-metal immersion applications.

Water-based

Formulated for spray and immersion application to cold rolled steel, galvanized steel, electro-galvanized steel, zinc-alloy coated steels, and small amounts of aluminum.

Formulated for spray application on multi-metal substrates prior to electrocoating.

Polycrystalline conversion coating designed for multi-metal immersion applications.

Ambient, nanoceramic, phosphate-free conversion coating formulated for use in multi-metal applications.

Internally accelerated, nickel-free polycrystalline conversion coating designed for multi-metal spray or immersion applications.

A reactive metal forming lubricant

Liquid non-reactive polymer lubricant for cold forging

Water-based pressure sensitive adhesive

A pickling process developed for stainless steel which removes the oxide layers formed during the rolling and the annealing of the metal

Biostable bodymaker coolant for drawing and ironing of aluminum beverage cans

Bodymaker coolant/lubricant for drawing and ironing of tinplate food and beverage cans

Neat cupper lubricant for drawing and ironing of aluminum beverage cans

Cupper lubricant for drawing and ironing of aluminum beverage cans

Nitric acid based deoxidizer for aluminum

Acidic, is specifically formulated for removal of scale from closed loop stainless steel heat transfer systems.

Chrome-free post treatment for conversion coated aluminum

Water-based contact adhesive

General-purpose adhesive that can be used to bond a variety of materials

Catalyst

High heat resistant EVA for edgebanding

Nearly invisible bond line

Versatile soft-forming adhesive

Good adhesion to difficult substrates

Ultra low density expanded polymeric microsphere

Ultra-low density polymeric shell to which is affixed an inert exterior coating

General purpose expanded polymeric microsphere

Small particle size expanded polymeric microsphere

Low temperature expandable polymeric microsphere

Low temperature expandable polymeric microsphere

Low temperature expandable polymeric microsphere

Liquid concentrate used in a caustic etch baths to produce a consistent matte, fine grain etch on aluminum and its alloys

Removable pressure sensitive hot melt

Long open time, general purpose hot melt

High performance full pressure sensitve hot melt for container labeling

High performance, low viscosity, pressure sensitive labeling hot melt designed to run on roll or magazine fed labelers

Medium viscosity hot melt pressure sensitive designed for crystal clear, no-look label applications

Powdered surface conditioning agent formulated to promote a fine, dense crystalline phosphate coating on iron and steel surfaces.

Liquid based surface conditioner designed to promote a refined crystalline structure when in a zinc phosphate coating application.

Water based solution, specifically formulated for use with resin/asbestos products

Silicone mold release agent

A conveniently packaged release agent wipe for high performance composite assemblies

Non-CFC release agent designed to provide multiple releases with no contaminating transfer

Non-CFC, semi-permanent, multiple release polymer resin that effectively releases all thermoset resins

Non-CFC, semi-permanent, multiple release polymer resin that effectively releases all thermoset resins

Non-CFC, semi-permanent, multiple release polymer resin that effectively releases all thermoset resins

Non-CFC, semi-permanent, multiple release polymer resin that effectively releases all thermoset resins

Proprietary water-based emulsion developed for releasing aerospace and other high performance composite structures

All-purpose, silicone based release agent

Water-based mold release agent for rubber goods

Generic mold release agent rubber-to-metal bonded parts

Water-based mold release agent for the most difficult molding applications

Formulated for the most difficult rubber molding applications, especially parts with high aspect ratios

Water-based mold release agent for rubber goods

Sealer for molds with microporosity problems, small surface scratches or imperfections

Unique water-based release agent with high temperature stability for thermoset composites

Mold release designed to form a semi-permanent release coating on the mold surface for rigid, cast polyurethane products

Mold release product for epoxy and urethanes

A sacrificial mold release developed specifically for urethane elastomer systems

Semi-permanenant mold release agent specifically formulated for reinforced polyester gel coats

Hot mold touch up version of Frekote® 44-NC™

Silicone solvent based mold release agent. Offers a high gloss finish with excellent part detail and mold geometry retention.

Non-CFC, semi-permanent, multiple release polymer resin for rigid, cast polyurethane products

Mold release for silicone rubber

A unique polymer release agent with high slip characteristics

A semi-permanent release agent for polyester gel-coat parts

Zinc rich, weldable primer

Nitrile/phenolic, water based primer

Blue & Gold is a one part, low temperature fusing epoxy powder especially designed for all types of capacitors including film, ceramic and tantalum.

One part, epoxy coating powder designed for the encapsulation of various types of electronic devices

RTM resin, 250°F/121°C service, epoxy, two component

Adhesive primer, solvent based, high temperature, 350°F/177°F curing, chromated

Toughened paste, high peel, two component, ambient cure, 180°F/82°C service

Toughened paste, high peel, two component, ambient cure, 180°F/82°C service

Filled paste, 250°F/121°C service temperature, ambient cure

Toughened paste, thixotropic, 180°F/82°C service

Filled paste, 300°F/149C service temperature, ambient cure

Toughened paste, high peel strength, volumetric mix ratio, 200°F/93°C service temperature

Toughened paste, high elongation, 140°F/60°C service temperature

Toughened paste 250°F/121°C service temperature, structural

Toughened paste, 350°F/177°C service temperature, thixotropic

Filled paste, liquid shim, fast cure, 225°F/107°C service temperature

Non-metallic filled paste adhesive, thixotropic, liquid shim, 350°F/177°F service, low peel

Syntactic low density paste, 300°F/149°F service, room temperature cure, lightweight

Low viscosity resin, 300°F/149°C service temperature, repair resin, room temperature cure

Lightweight fairing compound, 200°F/93°C service temperature, low density, sandable

Metal bond film adhesive, 250°F/121°C service temperature

Film adhesive, high temperature, 420°F/216°C service temperature

Film adhesive, 250°F/121°C cure, 300°F/149°C service temperature

Film adhesive, composite bonding, 300°F/149°C service temperature

Paste adhesive, one part, elevated cure, expanding, 250°F/121°C service temperature

Peel ply, pre-impregnated, polyester scrim

Unique one component epoxy encapsulant with excellent shelf stability, flame-out and fast curing capability at moderate temperature.

One of a series of high performance, single component, semiconductor encapsulants for chip-on-board applications.