Sealants

Automotive Body Shop

Rubber-based materials that are effective on oily metal substrates. Designed to cure at e-coat oven temperatures.

Expandable Sealants
Products capable of sealing where tolerances of mated sheet metal are not within specification.

Non-Expandable Sealants
Products capable of sealing without expansion where bridging or gap filling is not required.

Porosity Sealants
Anaerobic and heat cure sealants designed to seal porosity in metal and plastic parts.

Tapes
A continuous narrow, flexible strip of cloth, metal, paper, or plastic, such as adhesive tape, magnetic tape, or ticker tape.

Weld-Through Sealants
Sealants capable of withstanding heats that are produced during welding. Can often flow and seal the welded areas.

General Purpose Sealants

Automotive Paint Shop Sealers

Rubber based materials that are effective on oily metal substrates. Designed to cure in the paint bake ovens.

Expandable Sealants
Products capable of sealing where tolerances of mated sheet metal are not within spec

Non-Expandable Sealants
Products capable of sealing without expansion where bridging or gap filling is not required.

Porosity Sealants
Anaerobic and heat cure sealants designed to seal porosity in metal and plastic parts.

Tapes
A continuous narrow, flexible strip of cloth, metal, paper, or plastic, such as adhesive tape, magnetic tape, or ticker tape.

Trimline
Polyurethane or silane modified polymer-based material used to perform sealing operations on painted or plastic surfaces in the trimline.

General Purpose Sealants

Components

Electronics Sealing & Gasketing

A substance used to seal a surface to prevent passage of a liquid or gas.

Display Sealants

PCB Protection Sealants

Industrial Sealants

A broad range of products used to seal a surface to prevent passage of a liquid or gas.

Industrial Ambient Cure - Modified Silane Polymer
One- or two-component silane modified polymer material that uses humidity moisture to cure as an elastic adhesive or sealant.

Industrial Heat Cure - PVC
PVC-based sealing material. Expandable and non-expandable.

Industrial Heat Cure - Rubber
Rubber modified sealing material utilized in automotive body shop applications.

Industrial Heat Cure - Silicone
A silicone that cures when exposed to either convection heat or microwave.

Industrial High Performance

Industrial High Temperature

Industrial Light Cure - Acrylic
An acrylic adhesive that cures when exposed to UV and/or visible light.

Industrial Light Cure - Anaerobic (Hot Melt)
An anaerobic adhesive that cures when exposed to UV and/or visible light.

Industrial Light Cure - Silicone
A silicone that cures when exposed to UV and/or visible light and may have a secondary moisture cure as well.

Industrial Light Cure - Visible Light
An adhesive that cures when exposed to visible light.

Industrial Fast Setting
Permits higher throughput due to faster fixture times.

Industrial Moisture Cure
An adhesive or sealant that uses moisture in the air to cure.

Industrial General Purpose - Alkoxy
General purpose moisture cure silicone that is neutral curing, non-corrosive.

Industrial General Purpose - Acetoxy
General purpose moisture cure silicones that tend to have better adhesion at a lower cost than most other silicones and evolves acetic acid upon curing.

Industrial General Purpose - Hot Melt
Low cost, general purpose sealant.

Industrial General Purpose - Solvent Based
Sealants based on polymers dissolved in organic solvent solution as its primary solvent.

Industrial General Purpose - Water Based
Sealants based on polymers dispersed in water as its primary solvent.

Industrial Heat Cure - Acrylic
PVC free sealing material.

Industrial Heat Cure - Epoxy / PVC Hybrid
Utilized in automotive body shop applications.

Industrial Light Cure - Cyanoacrylate (Instant)

An adhesive that cures when exposed to UV and/or visible light.

> Instant Adhesives

 

Industrial Light Cure - Epoxy
An adhesive that cures when exposed to UV and/or visible light.

Substrate Type

Glass

Magnetic

Metal

Paper

Plastic

Textile

Wood

MS Polymers
One or two component silane modified polymer material that uses humidity moisture to cure as an elastic adhesive or sealant.

Foam

Tapes

A continuous, flexible strip of cloth, metal, paper or plastic that acts as an adhesive carrier that can bond one or more surfaces together.

Thread Sealants

To seal or secure metal pipes and fittings, filling the space between threaded metal parts, and hardening to prevent leakage.

Learn more...
> Loctite® Thread Sealants

For Metal and Plastic Parts

For Metal Parts

For Plastic Parts